Is the following true? If yes provide a proof, if no give counter example for t, A and y.
\begin{theorem}
Let N be a fixed natural number. Let t1,t2,…,tk>0 be given parameters. Let A=(Aij)i,j=1k be a positive definite, symmetric k×k matrix with Aii=1 and Aij∈(0,1) for i=j. Let
[
I(x_1,\dots,x_k) ;=; \frac{1}{2}\Bigl( x_1^{1/4},,x_2^{1/4},,\dots,,x_k^{1/4}\Bigr)^T A^{-1} \Bigl( x_1^{1/4},,x_2^{1/4},,\dots,,x_k^{1/4}\Bigr).
]
Now let f:[N,N]k→R be given by
[
f(x_1,\dots,x_k) ;=; 0.9,I(t_1,\dots,t_k),\sqrt{N},\min{x_1, \dots, x_k} ;-; N I\Bigl(t_1x_{1},,\dots,,t_kx_{k}\Bigr).
]
We denote (x1∗,…,xk∗) for a maximizer of f in the domain [N,N]k. Prove that f(x1∗,…,xk∗)≤−Nη for some η>1 and N large enough.
\end{theorem}
Assistant
The theorem states that for given N,t1,…,tk>0 and a positive definite, symmetric k×k matrix A with Aii=1 and Aij∈(0,1) for i=j, the maximum value of the function f(x1,…,xk) in the domain [N,N]k satisfies f(x1∗,…,xk∗)≤−Nη for some η>1 and N large enough.
Let's analyze the function f(x1,…,xk):
[
f(x_1,\dots,x_k) ;=; 0.9,I(t_1,\dots,t_k),\sqrt{N},\min{x_1, \dots, x_k} ;-; N I\Bigl(t_1x_{1},,\dots,,t_kx_{k}\Bigr).
]
Let CI=I(t1,…,tk)=21(t11/4,…,tk1/4)TA−1(t11/4,…,tk1/4). Since A is positive definite, A−1 is positive definite, so CI>0.
Let xi=αiN for αi∈[N−1/2,1].
The term I(t1x1,…,tkxk) can be rewritten as:
I(t1α1N,…,tkαkN)=21((t1α1N)1/4,…,(tkαkN)1/4)TA−1((t1α1N)1/4,…,(tkαkN)1/4)=N1/4N1/421((t1α1)1/4,…,(tkαk)1/4)TA−1((t1α1)1/4,…,(tkαk)1/4)=N1/2I(t1α1,…,tkαk).
Substitute this back into f(x):
f(α1N,…,αkN)=0.9CIN(Nmin{αi})−N(N1/2I(t1α1,…,tkαk))f(x)=N3/2[0.9CImin{αi}−I(t1α1,…,tkαk)].
Let g(α1,…,αk)=0.9CImin{αi}−I(t1α1,…,tkαk).
We are looking for f(x∗)=N3/2g(α∗), where x∗ is the maximizer of f. The domain for αi is [N−1/2,1].
Let α0=min{αi}. Then αi=γiα0 for some γi≥1.
I(t1α1,…,tkαk)=I(t1γ1α0,…,tkγkα0).
Since I(…) is a quadratic form in (…)1/4, we have I(cz1,…,czk)=c1/2I(z1,…,zk).
So I(t1γ1α0,…,tkγkα0)=α01/2I(t1γ1,…,tkγk).
Let M0(γ)=I(t1γ1,…,tkγk). Note that M0(γ)>0.
Then g(α)=0.9CIα0−M0(γ)α01/2.
Let y=α01/2. The domain for xi implies N≤xi≤N, so N−1/2≤αi≤1.
Thus N−1/4≤α01/2=y≤1.
So g(α)=0.9CIy2−M0(γ)y.
Since γi≥1, we have (tiγi)1/4≥ti1/4.
Let Zt=(t11/4,…,tk1/4)T.
Let Ztγ=((t1γ1)1/4,…,(tkγk)1/4)T.
M0(γ)=21ZtγTA−1Ztγ.
Since A−1 is positive definite, M0(γ)≥21λmin(A−1)∥Ztγ∥2.
Also ∥Ztγ∥2=∑i(tiγi)1/2.
Since γi≥1, we have (tiγi)1/2≥ti1/2.
So ∥Ztγ∥2≥∑iti1/2.
Let Kt′=∑iti1/2, which is a positive constant.
So M0(γ)≥21λmin(A−1)Kt′. Let K1=21λmin(A−1)Kt′. K1 is a positive constant.
Thus, we have an upper bound for g(α):
g(α)≤0.9CIy2−K1y.
Let H(y)=0.9CIy2−K1y.
We want to maximize g(α). Its maximum value g(α∗) is bounded above by the maximum of H(y) for y∈[N−1/4,1].
H(y) is a parabola opening upwards (since 0.9CI>0). Its minimum occurs at yc=K1/(2⋅0.9CI)=K1/(1.8CI).
We know CI=21ZtTA−1Zt.
yc=1.8⋅21ZtTA−1Zt21λmin(A−1)Kt′=1.8ZtTA−1Ztλmin(A−1)Kt′.
Since ZtTA−1Zt≥λmin(A−1)∥Zt∥2=λmin(A−1)Kt′, we have yc≤1.81=95.
For sufficiently large N, N−1/4 is very small, so N−1/4<yc≤5/9<1.
Since the minimum yc is within the interval [N−1/4,1], the maximum of H(y) must occur at one of the endpoints: N−1/4 or 1.
So, g(α∗)≤max(H(N−1/4),H(1)).
Let's evaluate these two values:
We need to show f(x∗)≤−Nη for η>1. This means N3/2g(α∗)≤−Nη, so g(α∗)≤−Nη−3/2.
This requires g(α∗) to be negative for large N.
Let's examine H(N−1/4)=0.9CIN−1/2−K1N−1/4.
As N→∞, N−1/4 dominates N−1/2. Since K1>0, this term approaches −K1N−1/4.
So N3/2H(N−1/4)≈N3/2(−K1N−1/4)=−K1N5/4.
Since 5/4>1, this part fits the theorem (with η=5/4).
Now consider H(1)=0.9CI−K1. This is a constant.
If H(1) is negative, then N3/2H(1) is N3/2 times a negative constant. This also fits the theorem (with η=3/2).
The problem arises if H(1) is positive.
If 0.9CI−K1>0, then H(1) is a positive constant.
In this case, for sufficiently large N, H(1) would be greater than H(N−1/4) (which is negative and goes to 0).
So max(H(N−1/4),H(1))=H(1)>0.
This would mean f(x∗)≤N3/2H(1), where H(1) is a positive constant.
This contradicts the claim f(x∗)≤−Nη for any η>1, because a positive upper bound cannot be ≤ a negative bound for large N.
Let's construct a counterexample where H(1)>0.
The condition is 0.9CI−K1>0, or 0.9CI>K1.
Substitute the definitions of CI and K1:
0.9(21T0TA−1T0)>21λmin(A−1)Kt′, where T0=(t11/4,…,tk1/4)T and Kt′=∑ti1/2.
This simplifies to 0.9T0TA−1T0>λmin(A−1)Kt′.
Consider k=2.
Let A=(10.20.21). This satisfies the conditions: positive definite (eigenvalues 0.8,1.2), symmetric, Aii=1, Aij∈(0,1) for i=j.
A−1=1−0.221(1−0.2−0.21)=0.961(1−0.2−0.21).
The eigenvalues of A−1 are 1+0.21=1.21=65 and 1−0.21=0.81=45.
So λmin(A−1)=5/6.
Let t1=1 and t2=104. These are positive parameters.
T0=(t11/4,t21/4)T=(11/4,(104)1/4)T=(1,10)T.
Kt′=∑ti1/2=11/2+(104)1/2=1+100=101.
Now calculate CI and K1:
CI=21T0TA−1T0=210.961(110)(1−0.2−0.21)(110)=1.921((1)(1)+(10)(−0.2)+(−0.2)(1)+(10)(10))=1.921(1−2−0.2+100)=1.9298.8.
K1=21λmin(A−1)Kt′=21⋅65⋅101=12505.
Now check H(1)=0.9CI−K1:
H(1)=0.9⋅1.9298.8−12505=1.9288.92−12505=46.3125−42.08333...H(1)≈4.22917>0.
Since H(1) is positive, the maximum value of g(α) (which bounds g(α∗) from above) is positive for N large enough (as H(N−1/4)≈−K1N−1/4 is negative and goes to zero).
Therefore, f(x∗)=N3/2g(α∗)≤N3/2H(1), where H(1) is a positive constant.
This shows that f(x∗) is bounded above by a positive value that grows as N3/2.
This directly contradicts the theorem's claim that f(x∗)≤−Nη for any η>1, as −Nη is negative for all N.
Thus, the theorem is false.
Counterexample:
N: Any sufficiently large natural number (e.g., N>1).
k: 2.
A:A=(10.20.21). This matrix is symmetric, positive definite, has Aii=1 and Aij∈(0,1) for i=j.
t:t1=1, t2=104. These are positive parameters.
For this choice of A and t, the maximum of f in the given domain is bounded above by a positive multiple of N3/2, which means it cannot be bounded above by a negative power of N.
The final answer is No.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.