Skip to content
The Chat Archive
o3-2025-04-16· OpenAI LMArena Human Preference 140K

What’s your summary of estimated kernel and user CPU time for various traffic patterns…

  1. User

    What’s your summary of estimated kernel and user CPU time for various traffic patterns on my system?

  2. Assistant

    Below is a compact “cheat-sheet” for a Linux 5.4 box that runs

    tcpdump -i <iface> 'ip6 and tcp and tcp-syn and out'   # classic BPF filter
    

    We assume
    • the BPF JIT is enabled (default on most distros)
    • a 3 GHz CPU for the %CPU math
    • classic BPF filter cost ≈ 100 cycles/packet (pessimistic)
    • tcpdump user-side cost ≈ 10 kcycles/matching-packet

    You can scale the numbers linearly for other clock rates or per-core loads.

    ────────────────────────────────────────────────────────────────────────── Traffic patterns → kernel vs. user CPU ──────────────────────────────────────────────────────────────────────────

    #Traffic pattern (Tx)Approx. Packets / secLink util.Kernel CPU for BPF filterUser CPU (SYNs only)Notes
    A“Just the SYNs” – 10 k SYNs / min (≈ 166 pps)1.7 ×10²~0 Gb/s166 pps ×100 c = 16.6 kcycles = 0.0006 %166 pps ×10 kcycles = 1.7 Mcycles = 0.055 %What you asked for; both costs invisible.
    BLight traffic – 1 Gb/s of 1500-B packets83 kpps1/258.3 Mcycles = 0.28 %same as A (SYNs don’t change)“Everyday” server load.
    CFull 25 Gb/s, 1500-B packets2.1 Mpps100 %210 Mcycles = 7 %same as AWire-speed bulk traffic, still <1 CPU core.
    DFull 25 Gb/s, 64-B packets (worst case)48.8 Mpps100 %4.88 Bcycles = 163 %same as ASmall-packet flood: needs >1 core or packets will drop.
    EExtreme SYN storm – 10 k SYNs / sec (lab test)1 ×10⁴n/a1 Mcycles = 0.03 %100 Mcycles = 3.3 %Still easy for user space; kernel cost tiny.

    Key take-aways

    1. User-space (tcpdump) load is governed by how many SYNs match the filter, not by total traffic. Even tens of thousands of SYNs per second barely dent a modern core.
    2. Kernel load scales with all transmitted packets. Only if you run the NIC flat-out with tiny frames do you risk burning a core and dropping packets.
    3. Linux 5.4 already JIT-compiles classic BPF, so there is no notable penalty versus newer kernels for this specific use-case.
    4. Watch /proc/net/dev or ethtool -S for Tx packet rates, and read the “X packets captured, Y dropped” line that tcpdump prints when it exits. If Y ≠ 0, raise the capture buffer (tcpdump -B 4096) or tame the packet rate.

    In typical production traffic (patterns A–C) the overhead is effectively invisible (<1 % total CPU), so feel free to run the capture continuously.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.