Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-opus-4-20250514-thinking-16k· AnthropicHugging Face LMArena Human Preference 140K

What is a good tennis string setup I could try? When using a full bed of synthetic gut,…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with o3-mini’s answer.
  1. User

    What is a good tennis string setup I could try? When using a full bed of synthetic gut, I usually break the strings in approximately an hour. I've been using all poly lately and love the performance and durability, but I feel that it might be somewhat hard on my arm.

  2. Claude Assistant

    A hybrid setup sounds perfect for your situation - it would give you better durability than full synthetic gut while being gentler on your arm than full poly.

    The classic approach would be poly in the mains (vertical strings) and synthetic gut or multifilament in the crosses (horizontal strings). This gives you the durability and spin potential of poly where you need it most, since the mains typically break first and contribute more to spin. The softer crosses add comfort and feel.

    For specific combinations, you might try something like Luxilon ALU Power or Solinco Hyper-G in the mains at around 50-52 lbs, paired with a quality synthetic gut like Prince Synthetic Gut or Gosen OG Sheep Micro in the crosses at 52-54 lbs. The slight tension differential helps the stringbed work together better.

    If you still find that too stiff, you could experiment with a softer poly like Solinco Vanquish or Head Velocity MLT in the mains, or even try a multifilament like Tecnifibre X-One Biphase instead of synthetic gut in the crosses for extra comfort.

    You could also consider using a thinner gauge poly (like 17g instead of 16g) to add some flex while maintaining good durability. What type of poly have you been using, and have you noticed any particular arm issues developing?

  3. User

    If I go with poly mains and natural/synthetic gut or multi crosses, which one should be strung tighter? Why?

  4. Claude Assistant

    The crosses (synthetic gut/multi) should be strung 2-4 lbs tighter than the poly mains.

    Here's why: Poly strings lose tension much faster than synthetic gut or multifilament - often dropping 10-15% within the first hour of play. By starting the poly at a lower tension, you're accounting for this tension loss, so the stringbed stays more balanced over time.

    Additionally, poly is naturally stiffer than synthetic materials. Stringing it at lower tension helps reduce that stiffness while still maintaining its playing characteristics. The higher-tensioned crosses help maintain the overall stability of the stringbed and can actually enhance the snap-back effect of the poly mains, which contributes to spin generation.

    A typical setup might be poly mains at 50 lbs and synthetic gut crosses at 53-54 lbs. Some players go with even larger differentials (up to 5-6 lbs), but 2-4 lbs is a good starting point.

    This approach also tends to create a more comfortable, arm-friendly feel compared to stringing both at the same tension, since it allows the poly to play a bit softer while the tighter crosses prevent the stringbed from feeling too mushy or uncontrolled.

  5. User

    I'm seeing conflicting information on which should be strung tighter in that scenario. Can you review the data and recommendations and reassess your feedback?

  6. Claude Assistant

    You're absolutely right to question this - there really is conflicting information out there, and I should have acknowledged that upfront.

    Some stringers and players recommend higher tension on the poly mains (by 2-4 lbs), arguing that poly naturally plays more powerful and needs higher tension to match the feel of the softer crosses. Others recommend the opposite - lower tension on the poly to compensate for its stiffness and rapid tension loss.

    Still others suggest stringing both at the same tension, letting the natural characteristics of each string type create the hybrid effect without complicating things.

    The truth is there's no universally "correct" answer. It often comes down to personal preference and what specific feel you're trying to achieve. Factors like your string choice, racquet, and playing style all influence what works best.

    Given the conflicting expert opinions, I'd suggest starting with equal tensions as a baseline, then experimenting from there. If you want more comfort, try dropping the poly tension 2-3 lbs. If you want more control and a crisper feel, try raising the poly tension 2-3 lbs above the crosses.

    What feels best really depends on your individual preferences and how the specific strings interact in your racquet.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.

Identical first prompt