In UE5, how do I use the panner node in a light function material?
- User
In UE5, how do I use the panner node in a light function material?
Assistant
Of course! Using the Panner node in a Light Function is a fundamental technique for creating dynamic and animated lighting effects in UE5. It's perfect for things like moving clouds, water caustics, searchlights, or sci-fi scanning effects.
Here’s a complete breakdown of how to do it, from the basics to a more advanced example.
What is a Light Function?
First, a quick refresher: A Light Function is a special type of Material that doesn't render color, normals, or roughness. Instead, it outputs a single grayscale value that acts as a filter or "gobo" for a light source.
- Black (0.0): The light is completely blocked.
- White (1.0): The light passes through at full intensity.
- Gray values: The light is partially blocked, modulating its intensity.
This grayscale mask is plugged into the Emissive Color output pin in the Material Editor.
Step-by-Step Guide: Creating a Panning Light Function
Let's create a simple effect of clouds moving across a light source.
Step 1: Create the Material
- In the Content Browser, right-click and select Material.
- Name it something descriptive, like
M_LightFunction_Clouds.
Step 2: Set the Material Domain (Crucial Step!)
- Double-click your new material to open the Material Editor.
- Click on a blank area in the graph to select the main material properties.
- In the Details panel on the left, find the Material section.
- Change the Material Domain from
SurfacetoLight Function.
You'll notice the output node changes. Now, it only accepts an input for Emissive Color. This is where we will plug our final grayscale mask.
Step 3: Build the Node Network
This is where we use the Panner. The logic is:
Coordinates->Panner (to move them)->Texture (to sample using the moving coordinates)->Output-
Add a Texture: Right-click in the graph and search for
Texture Sample.- In its Details panel, select a suitable texture. Unreal Engine includes a good default noise texture. Search for
T_Default_Noise_01or a cloud texture likeT_Smoke_SubUV.
- In its Details panel, select a suitable texture. Unreal Engine includes a good default noise texture. Search for
-
Add a Panner: Right-click and search for
Panner. -
Add Texture Coordinates: Right-click and search for
TextureCoordinate. This node controls the tiling of your texture. You can leave it as is for now, or change theUTilingandVTilingto make the texture repeat more or less. -
Connect the Nodes:
- Connect the output of the TextureCoordinate node to the
Coordinateinput of the Panner. - Connect the output of the Panner to the
UVsinput of the Texture Sample. - Connect one of the color channels (e.g., the Red channel) from the Texture Sample to the Emissive Color output pin. You only need one channel since it's a grayscale mask.
- Connect the output of the TextureCoordinate node to the
-
Set the Panner Speed:
- Select the Panner node.
- In its Details panel, set the Speed X and/or Speed Y to a small value, like
0.05. This will make the texture scroll. Positive values move in one direction, negative values in the other.
-
Click Apply and Save the material.
Step 4: Apply the Light Function to a Light
- Go back to your level. Add a light that supports Light Functions, such as a Spot Light or Directional Light. (Point Lights also work, but the effect projects spherically).
- Select the light in your scene.
- In its Details panel, scroll down to the Light section.
- Find the Light Function Material slot.
- Assign your
M_LightFunction_Cloudsmaterial to this slot. You can either drag it from the Content Browser or select it from the dropdown.
You should now see the light's projection being masked by your moving noise texture, creating the effect of moving cloud shadows!
Advanced Example: Realistic Clouds/Caustics
A single panning texture can look repetitive. A common professional technique is to pan two different textures at different speeds and in different directions, then combine them. This creates a much more complex and natural-looking effect.
- Duplicate the Node Setup: Copy and paste your
TextureCoordinate,Panner, andTexture Samplenodes. - Use a Different Texture: On the new
Texture Sample, choose a different noise or cloud texture. - Change the Panner Speed/Direction: On the new
Panner, set differentSpeed XandSpeed Yvalues. For example, if the first isX=0.05, set the second toX=-0.02andY=0.01. - Change the Tiling: On the new
TextureCoordinate, set different tiling values (e.g.,1.5instead of1.0) so the textures aren't scaled identically. - Combine the Textures: Use a Multiply node to combine the results of the two
Texture Samplenodes. Multiplying them darkens the result where both textures are dark, which works well for shadows. - Control Contrast (Optional but Recommended): Add a Power node after the
Multiply. TheExpvalue will control the contrast. Values > 1 increase contrast (harsher edges), while values < 1 decrease it (softer edges). - Connect to Output: Connect the final result (from the
MultiplyorPowernode) to Emissive Color.
This setup will produce a much more dynamic and less repetitive animated light mask, great for realistic water caustics or cloud cover.
Troubleshooting & Tips
- "My light just turns off when I apply the material." Your texture might be mostly black, or your contrast is too high. Try using a
OneMinusnode before the output to invert the mask, or use aPowernode to soften it. - "The effect isn't moving." Double-check that you've set a non-zero value for
Speed XorSpeed Yin your Panner node(s). - Use Material Instances: For easy tweaking, convert the Panner speeds and Texture Tiling values into parameters. Right-click a node like
Vector2D(for speed) and select "Convert to Parameter". Then you can create a Material Instance and change the speed in real-time without recompiling the material. - Rotation: For effects like a rotating fan, use the Rotator node instead of (or in addition to) the Panner. It works similarly by taking coordinates and outputting modified ones.
- User
I am not using a texture. However, I am using a bunch of math nodes which start from a linear gradient node. How do I pan this?
Assistant
Excellent question! This is a common point of confusion. The key insight is that the Panner node doesn't pan textures or colors; it pans coordinates.
Since your procedural effect (the gradient and all the math after it) is generated based on an initial set of coordinates, all you need to do is pan those coordinates before they enter your math network.
Let's break it down.
The Core Concept
- Procedural patterns need a map: Your math nodes are creating a pattern. To know where to draw each part of the pattern, they rely on an input coordinate system, like the one provided by the
TextureCoordinatenode (which gives you a 2D map from 0 to 1 across any surface). - The
LinearGradientnode is just using coordinates: TheLinearGradientnode is a shortcut. Under the hood, it's essentially just taking the Red channel (U) or Green channel (V) of theTextureCoordinatenode. - Move the map, not the drawing: To move your final pattern, you don't alter the math itself. You alter the "map" that the math is reading from. The Panner node is the perfect tool for this.
Step-by-Step: How to Pan Your Procedural Gradient
Let's assume your setup looks something like this (simplified):
BEFORE: A
LinearGradientnode (or aTextureCoordinatenode) is feeding into your chain of math nodes.Here is how you modify it to pan the entire effect.
Step 1: Find Your Coordinate Source
Identify the very first node in your chain that is providing the spatial information. This will almost always be one of two nodes:
TextureCoordinateLinearGradient(which, as mentioned, is a wrapper forTextureCoordinate)
Step 2: Insert the Panner Node
You are going to insert the
Pannernode right after your coordinate source, and before all of your math.- Add a Panner: Right-click in the material graph and create a
Pannernode. - Add a TextureCoordinate: If you were using a
LinearGradientnode, it's often clearer to replace it with aTextureCoordinatenode. This gives you more explicit control. - Rewire the Connections:
- Connect the output of the
TextureCoordinatenode to theCoordinateinput of thePanner. - Now, take the output of the
Pannerand plug it into the input of your math network where the gradient used to be.
- Connect the output of the
AFTER: The Panner now sits between the coordinates and the rest of your logic.
Step 3: Configure the Panner
- Select the
Pannernode. - In the Details panel, set the Speed X or Speed Y values.
Speed Xwill pan the effect horizontally. A value of0.1will move it in one direction.-0.1will move it in the opposite.Speed Ywill pan it vertically.
That's it! Your entire procedural effect, no matter how complex, will now scroll because the base coordinate system it's built upon is scrolling.
Practical Example: Panning Procedural Stripes
Let's make something a little more complex than a gradient to really show the power of this. We'll create panning black and white stripes.
- Coordinate Source: Start with a
TextureCoordinatenode. - Panner: Connect the
TextureCoordinateto aPanner. SetSpeed Xto0.2. - Isolate One Axis: Use a
Component Masknode to get just theRchannel (the X-axis) from the Panner's output. This gives us a moving gradient. - Create Repetition: Multiply the moving gradient by a number (e.g.,
10) to control the number of stripes. - Make it a Sawtooth Wave: Use a
Fracnode. This will take the result (e.g., 0 to 10) and make it repeat from 0 to 1 over and over, creating sharp stripes. - Smooth it Out (Optional): Feed the
Fracresult into aSinenode. This will turn the sharp sawtooth wave into a smooth sine wave, creating soft, blurry stripes. - Output: Connect the final result to the Emissive Color.
The node graph would look like this:
Now, when you apply this Light Function to a light, you'll see smooth, animated stripes of light moving across your scene, all generated procedurally and animated with a single Panner node at the very beginning of the chain.
- Procedural patterns need a map: Your math nodes are creating a pattern. To know where to draw each part of the pattern, they rely on an input coordinate system, like the one provided by the
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.