Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-flash· GoogleHugging Face LMArena Human Preference 140K

I am using mvware workstation 15.5 pro I am trying to intstall Ubuntu 20.05 and the…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Qwenqwen3-235b-a22b-no-thinking’s answer.
  1. User

    I am using mvware workstation 15.5 pro

    I am trying to intstall Ubuntu 20.05

    and the following is coming up ;

    Virtualized performance counters require at least one available functioning counter.

    Module 'VPMC' power on failed.

    Failed to start the virtual machine.

  2. Gemini Assistant

    This error message, "Virtualized performance counters require at least one available functioning counter. Module 'VPMC' power on failed. Failed to start the virtual machine," indicates an issue with how VMware Workstation is trying to access and use the CPU's performance monitoring features, or a conflict with other virtualization technologies on your Windows host.

    Here are the most common solutions, in order of likelihood:

    1. Disable Virtualized Performance Counters in VM Settings

    This is the most direct solution for this specific error, especially if your host CPU or a conflicting service is causing issues with these counters.

    1. Go to your VM's settings:

      • Open VMware Workstation.
      • Right-click on your "Ubuntu 20.05" virtual machine (or the VM you're trying to start) in the left pane.
      • Select Settings...
    2. Navigate to Processors:

      • In the Virtual Machine Settings window, click on Processors.
    3. Disable Performance Counters:

      • Look for a checkbox labeled "Virtualized CPU performance counters" or something similar.
      • Uncheck this box.
      • Click OK.
    4. Try to power on the VM again.

    2. Check and Enable Virtualization Technology in your Host PC's BIOS/UEFI

    This is a fundamental requirement for running 64-bit virtual machines. Even if it was working before, it's worth re-verifying, as some BIOS updates can reset settings.

    1. Restart your computer.
    2. Enter your BIOS/UEFI setup utility during boot. This is usually by pressing a key like F2, Del, F10, F12, or Esc immediately after powering on. The exact key varies by manufacturer (Dell, HP, Lenovo, ASUS, Acer, etc.).
    3. Look for Virtualization Settings:
      • Navigate through the BIOS menus. Common sections to look in are:
        • Configuration
        • Advanced
        • CPU
        • Security
      • Find settings like:
        • Intel Virtualization Technology (or Intel VT-x)
        • AMD-V (for AMD processors)
        • SVM Mode (Secure Virtual Machine Mode - another term for AMD-V)
        • Virtualization Extensions
        • VT-d (sometimes separate, usually good to enable if present)
    4. Ensure it's Enabled.
    5. Save changes and Exit BIOS/UEFI. Your computer will restart.
    6. Try to power on the VM again.

    3. Disable Hyper-V (and related features) on your Windows Host

    If you have Hyper-V, Windows Sandbox, WSL 2, or the Virtual Machine Platform enabled on your Windows 10 host, they can sometimes conflict with VMware Workstation because they also use the CPU's virtualization extensions, essentially "claiming" them before VMware can.

    1. Open "Turn Windows features on or off":

      • Press Windows Key + R, type optionalfeatures, and press Enter.
      • Alternatively, search for "Turn Windows features on or off" in the Start Menu.
    2. Uncheck Hyper-V and related features:

      • Uncheck the following options if they are checked:
        • Hyper-V (uncheck all sub-components too)
        • Virtual Machine Platform
        • Windows Hypervisor Platform
        • Windows Sandbox
        • Windows Subsystem for Linux (If you're using WSL 2, this one activates Hyper-V. If you need WSL, you might have to choose between it and VMware, or use a workaround like enabling Hyper-V and running VMware in a compatible mode, which can be less stable).
    3. Click OK and let Windows apply the changes.

    4. Restart your computer when prompted. This is crucial for the changes to take effect.

    5. Try to power on the VM again.

    4. Use bcdedit to disable HypervisorLaunchType (Advanced)

    If disabling Hyper-V in Windows Features doesn't fully resolve the conflict, you can try this command.

    1. Open Command Prompt as Administrator:

      • Search for cmd in the Start Menu.
      • Right-click on "Command Prompt" and select "Run as administrator."
    2. Enter the command:

      • Type the following command and press Enter:
        bcdedit /set hypervisorlaunchtype Off
        
    3. Restart your computer.

    4. Try to power on the VM again.

    To re-enable it later (if you want to use Hyper-V/WSL2):

    bcdedit /set hypervisorlaunchtype Auto
    

    Recommendation:

    Start with Solution 1 (Disable Virtualized Performance Counters in VM Settings), as it's the most direct fix for the exact error message you're receiving. If that doesn't work, then move on to Solution 2 (BIOS/UEFI) and then Solution 3 (Hyper-V).

    Good luck!

  3. User

    will the follwoing work or does it need to be a isoubuntu-22.04.5-desktop-amd64

  4. Gemini Assistant

    No, it does not need to be specifically ubuntu-22.04.5-desktop-amd64.

    VMware Workstation 15.5 Pro is perfectly capable of running a wide range of Linux distributions, including various versions of Ubuntu.

    Here's what you need to know:

    1. Ubuntu 20.04 LTS (the original version you mentioned):

      • If you have an official ubuntu-20.04.x-desktop-amd64.iso (where x is any number like 0, 1, 2, 3, 4, 5, or 6), it will work perfectly fine on VMware Workstation 15.5 Pro. Ubuntu 20.04 LTS is a Long Term Support release and is still fully supported.
    2. Ubuntu 22.04 LTS (the version you asked about):

      • Yes, ubuntu-22.04.5-desktop-amd64.iso (or any other point release like 22.04.1, 22.04.2, 22.04.3, 22.04.4) will also work. Ubuntu 22.04 LTS is the newer Long Term Support release.
    3. amd64 is correct: This refers to the 64-bit architecture, which is standard for modern desktop operating systems and what you want for a virtual machine on a modern PC.

    In summary:

    • You can use Ubuntu 20.04 LTS. (e.g., ubuntu-20.04.6-desktop-amd64.iso is the latest point release for 20.04).
    • You can also use Ubuntu 22.04 LTS. (e.g., ubuntu-22.04.5-desktop-amd64.iso is a current point release for 22.04).

    Recommendation:

    If you're starting fresh, I would lean towards using Ubuntu 22.04 LTS (the latest point release available, like ubuntu-22.04.5-desktop-amd64.iso). It's newer, has more up-to-date software, and will receive support for a longer period (until April 2027 for 22.04, compared to April 2025 for 20.04).

    Once you install Ubuntu, remember to install VMware Tools in the guest OS. This will greatly improve performance, graphics, copy/paste, drag-and-drop, and shared folder functionality.

  5. User

    cant get things to work, I best up date from 15.5 to next version, how or where can I find a link to down load the higher version, 16+

    don't want to down load it from vmware site as ask for email

    how can I get iso option download

  6. Gemini Assistant

    I understand your frustration with the "Virtualized performance counters" error and wanting to get things working.

    Let's clarify a few things regarding updating VMware Workstation and downloading ISOs:

    1. Updating VMware Workstation 15.5 to 16+

    Unfortunately, there's a misunderstanding here regarding how commercial software like VMware Workstation is distributed:

    • Official Downloads Require Email: VMware Workstation is commercial software. To download it legitimately (even for a trial or to upgrade an existing license), you must go through their official website. They require an email address for registration, licensing, and sometimes marketing purposes. This is standard practice for commercial software vendors.
    • No "ISO Option" for Workstation: VMware Workstation itself is downloaded as an executable installer file (.exe for Windows). It's not distributed as an ISO file (ISOs are typically for operating systems like Ubuntu).
    • Unofficial Sources are Dangerous: If you find a download for VMware Workstation from a site that doesn't ask for an email, it's highly likely to be an unofficial, potentially pirated, or even malicious version. Downloading from such sources puts your computer at severe risk of viruses, malware, and other security breaches. It's strongly advised against.
    • Licensing: An upgrade from Workstation 15.5 to 16 or 17 usually requires purchasing an upgrade license. Your Workstation 15.5 Pro license will not automatically work with version 16 or newer unless you purchased 15.5 very recently with an included upgrade entitlement.

    Therefore, if you want to update to VMware Workstation 16 or newer (the current version is 17 Pro):

    1. Go to the official VMware Workstation download page.
    2. You will need to create a VMware account or log in with an existing one, which involves providing your email address.
    3. You can then download the trial version or purchase an upgrade/new license.

    It's important to note: VMware Workstation 15.5 Pro is fully compatible with Ubuntu 20.04 and 22.04. The "Virtualized performance counters" error is almost certainly not because 15.5 is "too old" for Ubuntu 20.04. It's much more likely due to the configuration issues (BIOS/UEFI virtualization, Hyper-V conflicts, or the VM's specific performance counter setting) we discussed previously. Upgrading Workstation might not solve your core issue if one of these other problems persists.

    2. Getting Ubuntu ISOs (Without Email)

    This is much easier and completely different from VMware Workstation downloads. Ubuntu is free and open-source, and its ISOs are readily available without any registration or email requirement.

    • Official Ubuntu Website: This is always the best and safest place to get Ubuntu ISOs.

    • Direct Links for LTS Versions:

      • Ubuntu 22.04 LTS (Recommended for new installations):
        • Direct Download (current latest point release): https://ubuntu.com/download/desktop (Click the "Download 22.04.X LTS" button).
        • The direct link to the ISO itself changes with point releases, but ubuntu.com/download/desktop will always give you the latest stable LTS.
      • Ubuntu 20.04 LTS:
        • You can find this on the "Previous Releases" section or sometimes directly linked. The latest point release for 20.04 is currently 20.04.6.
        • Direct Download: https://releases.ubuntu.com/20.04/ubuntu-20.04.6-desktop-amd64.iso (You can copy and paste this into your browser, it will start the download directly without asking for an email).
    • Using Torrents (Alternative): For large files like ISOs, torrents are a legitimate and often faster way to download. Ubuntu provides torrent links for all their ISOs, which also don't require email registration. You'll need a torrent client (like qBittorrent or Transmission). You can usually find the .torrent file linked next to the direct download option on the Ubuntu download page.

    In summary:

    • For VMware Workstation updates: You must use the official VMware site and accept their email/account registration policy. There's no legitimate way around it.
    • For Ubuntu ISOs: You can download them directly from ubuntu.com or via torrents, completely free and without providing an email address.

    I strongly recommend trying to resolve the "Virtualized performance counters" error on your current VMware Workstation 15.5 Pro installation first, as it's highly capable of running Ubuntu 20.04/22.04. Upgrading might be an unnecessary step and cost if the underlying issue isn't Workstation's version.

  7. User

    okay, download pro 17. (VMware-workstation-full-15.5.6-16341506)

    The tried to install ; (ubuntu-20.04.6-desktop-amd64)

    And the following came up;

    This host does not support Intel VT-x.

    This host appears to be running in a virtual machine with VHV disabled. Ensure that VHV is enabled in the virtual machine configuration file.

    VMware Workstation does not support the user level monitor on this host.

    Module 'MonitorMode' power on failed.

    Failed to start the virtual machine.

  8. Gemini Assistant

    Okay, this new error message, "This host does not support Intel VT-x. This host appears to be running in a virtual machine with VHV disabled. VMware Workstation does not support the user level monitor on this host. Module 'MonitorMode' power on failed. Failed to start the virtual machine," is very specific and points to a critical conflict.

    The core issue is that VMware Workstation cannot access your CPU's hardware virtualization features (Intel VT-x or AMD-V). It explicitly says "This host does not support Intel VT-x," which is almost certainly incorrect for a modern PC, and then adds "This host appears to be running in a virtual machine with VHV disabled." This second part is the biggest clue.

    This almost always means that Windows' built-in hypervisor (Hyper-V or related features) is currently active and has claimed the virtualization hardware, preventing VMware Workstation from using it. Even if you don't use Hyper-V for your own VMs, its presence and activation can cause this conflict.

    Let's address this systematically. You do NOT need Workstation 17 for this; Workstation 15.5 or even 12 would encounter the same conflict. The problem is with the underlying host OS configuration.

    Critical Steps to Resolve:

    1. COMPLETELY Disable Hyper-V and Related Features in Windows

    Even if you tried this before, it's crucial to ensure every relevant component is off and that you've restarted.

    1. Open "Turn Windows features on or off":

      • Press Windows Key + R, type optionalfeatures, and press Enter.
      • Alternatively, search for "Turn Windows features on or off" in the Start Menu.
    2. UNCHECK ALL of these boxes:

      • Hyper-V (uncheck its parent box and all sub-components)
      • Virtual Machine Platform
      • Windows Hypervisor Platform
      • Windows Sandbox
      • Windows Subsystem for Linux (If you're using WSL 2, this one activates Hyper-V. If you need WSL, you might have to choose between it and VMware, or use a workaround like enabling Hyper-V and running VMware in a compatible mode, which can be less stable).
    3. Click OK.

    4. IMPORTANT: Restart your computer when prompted. This is absolutely essential for these low-level changes to take effect. If you don't restart, the changes won't be applied.

    2. Use bcdedit to ensure the Hypervisor is Disabled at Boot (Strongly Recommended)

    This command makes sure the Windows Hypervisor isn't loaded at boot time.

    1. Open Command Prompt as Administrator:

      • Search for cmd in the Start Menu.
      • Right-click on "Command Prompt" and select "Run as administrator."
    2. Enter the command:

      • Type the following command and press Enter:
        bcdedit /set hypervisorlaunchtype Off
        
      • You should see a message confirming "The operation completed successfully."
    3. Restart your computer again. This is crucial for this command to take effect.

      • (To re-enable it later if you need Hyper-V/WSL2: bcdedit /set hypervisorlaunchtype Auto and then restart.)

    3. Verify Intel VT-x / AMD-V is Enabled in your PC's BIOS/UEFI

    This is the fundamental hardware requirement. Even if you've checked it before, double-check after doing the Hyper-V steps, as some systems can be finicky.

    1. Restart your computer.
    2. Enter your BIOS/UEFI setup utility during boot. This is usually by pressing a key like F2, Del, F10, F12, or Esc immediately after powering on. (The exact key varies by manufacturer).
    3. Look for Virtualization Settings:
      • Navigate through the BIOS menus. Common sections are:
        • Configuration
        • Advanced
        • CPU
        • Security
      • Find settings like:
        • Intel Virtualization Technology (or Intel VT-x)
        • AMD-V (for AMD processors)
        • SVM Mode (Secure Virtual Machine Mode - another term for AMD-V)
        • Virtualization Extensions
        • VT-d (usually good to enable if present, though VT-x/AMD-V is the primary for VMs).
    4. Ensure it's Enabled.
    5. Save changes and Exit BIOS/UEFI. Your computer will restart.

    4. After all the above, try to start your Ubuntu VM again.

    Important Note about Nested Virtualization (VHV): The error "This host appears to be running in a virtual machine with VHV disabled" implies VMware Workstation thinks your Windows OS (the host for Workstation) is itself a VM. This happens when Windows' native hypervisor is active. By disabling Hyper-V and its components, you're essentially telling Windows to stop pretending to be a VM at that low level, allowing VMware Workstation direct access to the hardware virtualization features.

    Go through these steps carefully. The most common culprit is Hyper-V not being fully disabled, or not restarting the system after changes.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.