archlinux nightshift wayland
- User
archlinux nightshift wayland
Assistant
To implement a "night shift" mode (also known as "redshift" or blue light filter) on Arch Linux while using Wayland, there are several considerations and tools you can use. Since Wayland handles display management differently from X11, some traditional tools like
xrandrorredshiftmay not work directly. However, modern tools designed for Wayland are available to achieve this functionality.Here’s a step-by-step guide to set up a night shift mode on Arch Linux under Wayland:
1. Understand the Limitations of Wayland
- Wayland does not allow direct manipulation of the screen gamma or color temperature in the same way as X11.
- Tools that rely on
xrandror similar X11-specific APIs will not work under Wayland. - Instead, you need to use Wayland-compatible tools or compositor-specific settings.
2. Use a Compositor-Specific Solution
Many Wayland compositors (e.g.,
sway,mutter(GNOME),kwin(KDE)) have built-in support for adjusting screen color temperature. Below are instructions for popular compositors:a. GNOME (Mutter Compositor)
- GNOME's built-in night light feature works seamlessly under Wayland.
- To enable it:
- Go to Settings → Displays → Night Light.
- Toggle the Night Light switch to enable it.
- Configure the schedule (manual or automatic based on sunrise/sunset).
- Alternatively, you can use the
gsettingscommand-line tool:gsettings set org.gnome.settings-daemon.plugins.color night-light-enabled true
b. KDE Plasma (KWin Compositor)
- KDE Plasma provides a "Night Color" feature under Wayland.
- To enable it:
- Go to System Settings → Display and Monitor → Night Color.
- Enable the feature and configure the schedule or manual mode.
- This feature works natively under Wayland without requiring additional tools.
c. Sway (or other wlroots-based compositors)
- Sway and other wlroots-based compositors (e.g.,
Hyprland) do not have a built-in night shift feature but can integrate with external tools likewlsunsetorgammastep.
3. Install and Use
wlsunset-
wlsunsetis a lightweight tool designed specifically for Wayland to adjust screen color temperature. -
Installation:
sudo pacman -S wlsunset -
Usage:
- Run
wlsunsetwith desired parameters:
Replacewlsunset -t 4500 -l <latitude> -L <longitude><latitude>and<longitude>with your geographic coordinates. The-toption specifies the target color temperature in Kelvin (e.g., 4500K for a warm tone). - You can also specify a fixed time range:
This will activate the filter between 7 PM and 6 AM.wlsunset -t 4500 -S 19:00 -E 06:00
- Run
-
Add
wlsunsetto your startup applications to make it persistent.
4. Install and Use
gammastep-
gammastepis a modern alternative toredshiftthat supports Wayland. -
Installation:
sudo pacman -S gammastep -
Usage:
- Run
gammastepwith desired parameters:
Replacegammastep -O 4500 -l <latitude>:<longitude><latitude>:<longitude>with your location and-Owith the desired color temperature. - You can also use the
-m waylandflag explicitly to ensure compatibility:gammastep -m wayland -O 4500 -l <latitude>:<longitude>
- Run
-
Add
gammastepto your autostart configuration to make it run automatically.
5. Alternative: Custom Scripts
If you prefer more control, you can write custom scripts to toggle the night shift mode. For example, you can use
wlsunsetorgammastepin combination with cron jobs or systemd timers to automate the process.
6. Verify Compatibility
- Ensure your compositor supports the tool you choose. For example:
wlsunsetworks well with wlroots-based compositors like Sway and Hyprland.gammastepis more versatile and works across various environments.
- Test the tool to confirm it adjusts the screen color correctly.
7. Troubleshooting
- If the color adjustment does not take effect, check if your compositor has conflicting settings (e.g., built-in night light features).
- Ensure you are running the tool under Wayland (not X11). You can verify this by running:
It should outputecho $XDG_SESSION_TYPEwayland.
By following these steps, you can successfully enable a night shift mode on Arch Linux under Wayland. The choice of tool depends on your desktop environment and personal preferences.
- User
gammastep -m wayland Error: Could not control gamma, exiting. Error: Failed to start adjustment method: wayland
Assistant
The error message you're encountering,
Error: Could not control gamma, exiting. Error: Failed to start adjustment method: wayland, indicates thatgammastepis unable to adjust the screen color temperature using the Wayland protocol. This issue can arise due to several reasons, such as missing permissions, compositor incompatibility, or incorrect configuration.Here’s a detailed guide to troubleshoot and resolve this issue:
1. Verify Wayland Session
Ensure that you are running
gammastepin a Wayland session. You can confirm this by running:echo $XDG_SESSION_TYPEThe output should be
wayland. If it saysx11, you are not in a Wayland session, andgammastepwill not work with the-m waylandflag.
2. Check Compositor Compatibility
Not all Wayland compositors support gamma adjustment via tools like
gammastep. For example:- Sway and other wlroots-based compositors (e.g., Hyprland) generally support
gammastep. - GNOME (Mutter) and KDE Plasma (KWin) have their own built-in night light features and may not allow external tools to control gamma.
If you're using GNOME or KDE, consider using their native night light settings instead of
gammastep.
3. Install Required Dependencies
Ensure that all necessary dependencies for
gammastepare installed. On Arch Linux, you can install the required packages with:sudo pacman -S gammastepAdditionally, ensure that your compositor supports the Wayland protocol for gamma control. For wlroots-based compositors, this functionality is typically included.
4. Run as Unprivileged User
Some compositors require that gamma adjustment tools run without elevated privileges. Avoid running
gammastepwithsudounless explicitly required.
5. Test with Debugging Output
Run
gammastepwith verbose output to gather more information about the failure:gammastep -m wayland -vThis will provide detailed logs that can help identify the root cause of the issue.
6. Alternative Adjustment Methods
If the
waylandadjustment method fails, try using a different method supported bygammastep. For example:- Use the
randrmethod if you're on X11:gammastep -m randr - Use the
drmmethod if you're on a system with direct DRM access:gammastep -m drm
Note that these methods may not work under Wayland but can serve as alternatives if you switch to X11 temporarily.
7. Switch to
wlsunsetIf
gammastepcontinues to fail, consider usingwlsunset, another tool specifically designed for Wayland. Install it with:sudo pacman -S wlsunsetThen run it with:
wlsunset -t 4500 -l <latitude> -L <longitude>Replace
<latitude>and<longitude>with your geographic coordinates. This tool is lightweight and works well with wlroots-based compositors like Sway.
8. Use Native Night Light Features
If neither
gammastepnorwlsunsetworks, fallback to your desktop environment's native night light feature:- GNOME: Enable "Night Light" in Settings → Displays.
- KDE Plasma: Enable "Night Color" in System Settings → Display and Monitor.
- These features are integrated into the compositor and are guaranteed to work under Wayland.
9. Check Logs for Errors
If none of the above solutions work, check system logs for additional clues. Use
journalctlto inspect logs:journalctl -xeLook for any errors related to
gammastepor your compositor.
10. Consider Hardware Limitations
Some hardware or drivers may not support gamma adjustments under Wayland. If you're using proprietary drivers or an older GPU, this could be the root cause. In such cases, switching to X11 might be the only viable option.
Summary of Steps
- Confirm you're in a Wayland session (
$XDG_SESSION_TYPE). - Ensure your compositor supports gamma adjustment (e.g., wlroots-based compositors).
- Install
gammastepand test with verbose output (-v). - Try alternative adjustment methods (
randr,drm) or tools likewlsunset. - Use native night light features in GNOME or KDE if all else fails.
By following these steps, you should be able to identify and resolve the issue preventing
gammastepfrom working under Wayland. If the problem persists, please provide additional details about your compositor and setup for further assistance.- Sway and other wlroots-based compositors (e.g., Hyprland) generally support
- User
❯ gammastep -m wayland -v
Notice: Solar elevations: > 3.0 (Day), < -6.0 (Night) Notice: Temperatures: 6500K (Day), 4500K (Night) Notice: Brightness: 1.00:1.00 Notice: Gamma (Day): 1.000, 1.000, 1.000 Notice: Gamma (Night): 1.000, 1.000, 1.000 Error: Could not control gamma, exiting. Error: Failed to start adjustment method: wayland
~ ❯ echo $XDG_RUNTIME_DIR /run/user/1000
~ ❯ echo $XDG_SESSION_TYPE
wayland
Assistant
The verbose output from
gammastepconfirms that it recognizes the Wayland session but fails to control gamma using thewaylandadjustment method. This issue is likely related to compositor compatibility or missing permissions. Let's go through additional troubleshooting steps to resolve this.
1. Verify Compositor Support
- The
waylandadjustment method ingammasteprelies on the compositor supporting the necessary Wayland protocols for gamma adjustment. - If you're using a compositor like GNOME (Mutter) or KDE Plasma (KWin), they may not expose the necessary protocols for external tools like
gammastep. These compositors typically handle gamma adjustments internally through their built-in night light features. - For wlroots-based compositors like Sway, Hyprland, or Wayfire, the
waylandadjustment method should work, as these compositors support the required protocols.
Action:
- Confirm which compositor you are using:
Common outputs includeecho $XDG_SESSION_DESKTOPsway,gnome,kde, etc. - If you're using GNOME or KDE, switch to their native night light features instead of
gammastep.
2. Check Permissions
- Ensure that your user has access to the Wayland socket. The
$XDG_RUNTIME_DIRenvironment variable (/run/user/1000) indicates where the Wayland socket is located. - Verify that the Wayland socket exists and is accessible:
The output should show a socket file with appropriate permissions (e.g., owned by your user).ls -l $XDG_RUNTIME_DIR/wayland-0
Action:
- If the socket is missing or inaccessible, restart your session or check your display manager configuration.
3. Test with Elevated Privileges
- Some systems require elevated privileges to adjust gamma settings. Test running
gammastepwithsudo:sudo gammastep -m wayland -v - If this works, it indicates a permissions issue. You can address this by adjusting your user's access to the Wayland socket or running
gammastepas root (not recommended for long-term use).
4. Use
wlsunsetInstead- If
gammastepcontinues to fail, consider switching towlsunset, a tool specifically designed for Wayland. It uses the same underlying protocols and may work better in some cases. - Install
wlsunset:sudo pacman -S wlsunset - Run it with your location coordinates:
Replacewlsunset -t 4500 -l <latitude> -L <longitude><latitude>and<longitude>with your geographic coordinates.
Example:
wlsunset -t 4500 -l 40.7128 -L -74.0060- Add
wlsunsetto your startup applications if it works.
5. Switch to X11 Temporarily
- If neither
gammastepnorwlsunsetworks under Wayland, you can temporarily switch to an X11 session to test gamma adjustment. - Log out of your current session and select an X11 session from your display manager (e.g., GDM, SDDM).
- Run
gammastepwithout the-m waylandflag:gammastep -m randr - If this works, it confirms that the issue is specific to Wayland.
6. Debugging Further
- If none of the above resolves the issue, gather more information about your compositor and environment:
- Check the compositor version:
(For Sway or Hyprland.)swaymsg -t get_version - Check for errors in the compositor logs:
journalctl -xe - Look for any messages related to gamma or color management.
- Check the compositor version:
7. Fallback to Native Night Light Features
- If all else fails, use your desktop environment's native night light feature:
- GNOME: Enable "Night Light" in Settings → Displays.
- KDE Plasma: Enable "Night Color" in System Settings → Display and Monitor.
- These features are integrated into the compositor and guaranteed to work under Wayland.
Summary of Actions
- Confirm your compositor supports gamma adjustment under Wayland (e.g., Sway, Hyprland).
- Verify Wayland socket permissions and accessibility.
- Test
gammastepwith elevated privileges or switch towlsunset. - Temporarily switch to X11 if needed.
- Use native night light features as a fallback.
If you provide additional details about your compositor and setup (e.g.,
sway,gnome,kde), I can offer more specific guidance.- The
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.