Skip to content
TheChatArchiveThe Chat Archive
Qwenqwen3-30b-a3b· Alibaba (Qwen)Hugging Face LMArena Human Preference 140K

#............................ Температура ............................# - platform:…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-opus-4-20250514’s answer.
  1. User

    #............................ Температура ............................#

    • platform: homeassistant entity_id: sensor.gismeteo_temperature id: weathertemperatureaccuracydecimals:1forceupdate:trueonvalue:then:−lambda:∣−floattemp=id({weather}_temperature accuracy_decimals: 1 force_update: true on_value: then: - lambda: |- float temp = id({weather}_temperature).state; char buffer[8]; if (abs(temp) < 1) { lv_label_set_text(id({lvgl}_temperature_text), " 0°"); } else { snprintf(buffer, sizeof(buffer), "%.1f°", temp); std::string text = temp >= 1 ? ("+" + std::string(buffer)) : buffer; lv_label_set_text(id({lvgl}_temperature_text), text.c_str()); }

          if ((temp < 1) && (temp > -1))
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_zero)); }
          else if ((temp >= 1) && (temp < 10))
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_1)); }
          else if ((temp >= 10) && (temp < 20))
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_2)); }
          else if ((temp >= 20) && (temp < 30))
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_3)); }
          else if (temp >= 30)
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_4)); }
          else if ((temp <= -1) && (temp > -10))
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_1)); }
          else if ((temp <= -10) && (temp > -20))
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_2)); }
          else if ((temp <= -20) && (temp > -30))
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_3)); }
          else if (temp <= 30)
            { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_4)); }
      
  2. Qwen Assistant

    The provided code has a critical issue in the temperature icon selection logic. The final else if (temp <= 30) condition is incorrect and should be replaced with else if (temp <= -30) to properly handle extreme cold temperatures. Here's the corrected version with explanations:


    Corrected Code

    if ((temp < 1) && (temp > -1))
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_zero)); }
    else if ((temp >= 1) && (temp < 10))
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_1)); }
    else if ((temp >= 10) && (temp < 20))
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_2)); }
    else if ((temp >= 20) && (temp < 30))
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_3)); }
    else if (temp >= 30)
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_4)); }
    else if ((temp <= -1) && (temp > -10))
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_1)); }
    else if ((temp <= -10) && (temp > -20))
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_2)); }
    else if ((temp <= -20) && (temp > -30))
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_3)); }
    else if (temp <= -30)
      { lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_4)); }
    

    Key Fixes and Explanations

    1. Incorrect Condition for Extreme Cold
      The original code had:

      else if (temp <= 30)
        { lv_img_set_src(..., id(${image}_temp_low_4)); }
      

      This is incorrect because temp <= 30 is always true for negative temperatures (e.g., -35 ≤ 30). This would incorrectly apply the temp_low_4 icon to all negative values, even those not in the -30°C range.

      Fix: Replace temp <= 30 with temp <= -30 to target extreme cold.

    2. Logical Flow
      The code now correctly handles temperature ranges in order:

      • Zero/Close to Zero: abs(temp) < 1
      • Positive Ranges: 1–9°C, 10–19°C, 20–29°C, ≥30°C
      • Negative Ranges: -1–-9°C, -10–-19°C, -20–-29°C, ≤-30°C
    3. String Formatting
      The snprintf and std::string logic correctly formats the temperature with a + sign for positive values and preserves the sign for negatives. For example:

      • 2.3°C → +2.3°C
      • -2.3°C → -2.3°C
    4. Edge Cases

      • Zero Handling: Values between -1 and 1 (e.g., 0.5, -0.5) are displayed as 0°C.
      • Precision: The accuracy_decimals: 1 ensures one decimal place is shown (e.g., 2.3°C).

    Why This Matters

    • User Experience: Incorrect icon selection for extreme temperatures (e.g., -35°C) could mislead users.
    • Code Reliability: Proper range checks ensure the correct UI elements are displayed for all valid temperature values.

    Final Notes

    • Ensure the temp_low_4 image is defined for temperatures ≤ -30°C.
    • Test with edge cases like -35°C, 0.5°C, 10.0°C, and 30.5°C to confirm the logic works as intended.
  3. User

    оптимизируй код

  4. Qwen Assistant

    Here's an optimized version of your code with improved structure, efficiency, and clarity:


    Optimized Code

    float temp = id(${weather}_temperature).state;
    char buffer[8];
    
    // Handle zero/very close to zero
    if (abs(temp) < 1) {
      lv_label_set_text(id(${lvgl}_temperature_text), " 0°");
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_zero));
      return;
    }
    
    // Format temperature with sign
    snprintf(buffer, sizeof(buffer), "%+.1f°", temp);
    lv_label_set_text(id(${lvgl}_temperature_text), buffer);
    
    // Temperature icon logic
    if (temp >= 30) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_4));
    } else if (temp >= 20) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_3));
    } else if (temp >= 10) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_2));
    } else if (temp >= 1) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_high_1));
    } else if (temp <= -30) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_4));
    } else if (temp <= -20) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_3));
    } else if (temp <= -10) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_2));
    } else if (temp <= -1) {
      lv_img_set_src(id(${lvgl}_temperature_icon), id(${image}_temp_low_1));
    }
    

    Key Optimizations

    1. Simplified Condition Logic

      • Reordered conditions to check from highest to lowest for positive values and lowest to highest for negative values. This avoids redundant checks and ensures early exits.
      • Example:
        if (temp >= 30) ...
        else if (temp >= 20) ...
        
    2. Streamlined String Formatting

      • Used "%+.1f°" format to automatically include the + for positive temperatures and - for negatives.
      • Removed the need for manual string concatenation (std::string) and if-else blocks for sign handling.
    3. Early Exit for Zero Case

      • Directly set the label and icon for abs(temp) < 1 and return early to avoid unnecessary processing.
    4. Reduced Code Complexity

      • Eliminated redundant else if checks by leveraging ordered condition evaluation.

    Why This Works Better

    • Efficiency: The reordered conditions reduce the number of comparisons and ensure the correct path is taken faster.
    • Readability: The logic is now more linear and easier to follow.
    • Memory Safety: Avoids std::string and uses a fixed-size buffer (char buffer[8]), which is critical in embedded systems like ESPHome.

    Edge Case Handling

    • Zero/Very Close to Zero: Handled explicitly with abs(temp) < 1.
    • Sign Handling: Automatically managed by "%+.1f°", ensuring consistent formatting.
    • Extremes: Correctly covers all ranges (e.g., temp <= -30, temp >= 30) without overlap.

    Final Notes

    • Ensure that the temp_low_4 and temp_high_4 images are defined for their respective ranges.
    • Test with values like -35°C, 0.5°C, 10.0°C, and 30.5°C to confirm behavior.
  5. User

    /config/esphome/touchscreen-1.yaml: In lambda function: /config/esphome/touchscreen-1.yaml:664:18: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 664 | { { 30, id({image}_temp_high_4) }, { 20, id({image}_temp_high_3) }, | ^~~~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:664:46: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 664 | { { 30, id({image}_temp_high_4) }, { 20, id({image}_temp_high_3) }, | ^~~~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:665:18: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 665 | { 10, id({image}_temp_high_2) }, { 1, id({image}_temp_high_1) }, | ^~~~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:665:46: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 665 | { 10, id({image}_temp_high_2) }, { 1, id({image}_temp_high_1) }, | ^~~~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:666:18: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 666 | { -1, id({image}_temp_zero) }, { -10, id({image}_temp_low_1) }, | ^~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:666:44: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 666 | { -1, id({image}_temp_zero) }, { -10, id({image}_temp_low_1) }, | ^~~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:667:18: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 667 | { -20, id({image}_temp_low_2) }, { -30, id({image}_temp_low_3) }, | ^~~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:667:45: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 667 | { -20, id({image}_temp_low_2) }, { -30, id({image}_temp_low_3) }, | ^~~~~~~~~~~~~~~~ | | | esphome::image::Image* /config/esphome/touchscreen-1.yaml:668:19: error: cannot convert 'esphome::image::Image*' to 'lv_img_dsc_t*' in initialization 668 | { -100, id(${image}_temp_low_4) } }; | ^~~~~~~~~~~~~~~~ | | | esphome::image::Image* *** [.pioenvs/touchscreen-1/src/main.cpp.o] Error 1 ========================= [FAILED] Took 16.98 seconds =========================

  6. Qwen Assistant

    The error occurs because you're trying to assign an esphome::image::Image* (from id(...)) to a function that expects a lv_img_dsc_t*. ESPHome's LVGL integration requires using the LV_IMG_DSC_T macro to convert an Image object into a lv_img_dsc_t*.


    ✅ Fix: Use LV_IMG_DSC_T() Macro

    Replace all instances where you use id(${image}_...) with LV_IMG_DSC_T(id(${image}_...)).

    Example Fix:

    lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_high_4)));
    

    🔧 Corrected Code Snippet

    Here's how your temperature icon logic should look after applying the fix:

    float temp = id(${weather}_temperature).state;
    char buffer[8];
    
    // Handle zero/very close to zero
    if (abs(temp) < 1) {
      lv_label_set_text(id(${lvgl}_temperature_text), " 0°");
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_zero)));
      return;
    }
    
    // Format temperature with sign
    snprintf(buffer, sizeof(buffer), "%+.1f°", temp);
    lv_label_set_text(id(${lvgl}_temperature_text), buffer);
    
    // Temperature icon logic
    if (temp >= 30) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_high_4)));
    } else if (temp >= 20) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_high_3)));
    } else if (temp >= 10) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_high_2)));
    } else if (temp >= 1) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_high_1)));
    } else if (temp <= -30) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_low_4)));
    } else if (temp <= -20) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_low_3)));
    } else if (temp <= -10) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_low_2)));
    } else if (temp <= -1) {
      lv_img_set_src(id(${lvgl}_temperature_icon), LV_IMG_DSC_T(id(${image}_temp_low_1)));
    }
    

    📌 Explanation

    • LV_IMG_DSC_T(id(...)): This macro converts an esphome::image::Image* into a lv_img_dsc_t*, which is what LVGL expects for image sources.
    • Why it's needed: ESPHome's Image class is not directly compatible with LVGL's lv_img_dsc_t. The macro bridges this gap by providing the correct image descriptor.

    🧪 Testing Tips

    • Ensure the temp_low_4 and temp_high_4 images are defined in your images: section.
    • Test edge cases like -35°C, 0.5°C, 10.0°C, and 30.5°C to confirm the logic works.

    ✅ Final Notes

    • Always use LV_IMG_DSC_T(...) when passing id(...) to LVGL functions like lv_img_set_src.
    • This fix ensures compatibility between ESPHome's Image type and LVGL's lv_img_dsc_t type.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.