How would you set up the ARB and dampers?
- User
How would you set up the ARB and dampers?
Assistant
For Zandvoort in FIA F4 with a 1-stop fuel-saving strategy, your ARB (Anti-Roll Bar) and damper setup should balance stability under fuel load while maintaining responsiveness for overtaking. Here’s the optimal approach:
ARB (Anti-Roll Bar) Setup
Front ARB: 3 (or 4 if understeery)
- Stiffer front helps with turn-in at T1, T3, and T11 (high-speed corners).
- Prevents excessive roll when fuel is heavy early in the stint.
Rear ARB: 5 (or 6 if oversteery)
- Softer rear improves traction out of T4, T7, and T14 (slow exits).
- Helps manage tire wear during fuel-saving phases.
Adjustments:
- If the car is snappy on exit, soften rear ARB by 1 click.
- If understeering mid-corner, stiffen front ARB by 1 click.
Damper Setup
Bump (Compression) & Rebound (Extension):
- Front Bump: 5-6 (absorbs kerbs at T3, T13)
- Front Rebound: 4-5 (keeps front planted under braking)
- Rear Bump: 4-5 (helps traction on bumpy exits)
- Rear Rebound: 5-6 (prevents rear instability under fuel load)
Why?
- Stiffer front bump helps with kerb-riding (Zandvoort is bumpy).
- Softer rear rebound prevents wheelspin when fuel is heavy.
- Slightly stiffer rear bump improves traction in slow corners.
Fuel-Saving Adjustments
- Early stint (heavy fuel): Run 1 click softer on rear rebound to help traction.
- Late stint (light fuel): Stiffen front rebound by 1 click for sharper turn-in.
Final Notes
- Test in practice: Run 3 laps heavy fuel, 3 laps light to confirm balance.
- Watch tire temps: If rear tires overheat, soften rear ARB or increase rear rebound.
- Pit stop tweak: If pitting early (lap 17), add 1 click rear ARB to compensate for fresh tires + fuel weight.
This setup keeps the car stable under fuel load while allowing aggressive moves when needed. 🚀
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.