Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-opus-4-20250514· AnthropicHugging Face LMArena Human Preference 140K

how to convert decimal number to thermometric code

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with DeepSeekdeepseek-v3-0324’s answer.
  1. User

    how to convert decimal number to thermometric code

  2. Claude Assistant

    Thermometric code (also called thermometer code or unary code) is a simple encoding where a decimal number n is represented by n consecutive 1s followed by 0s to fill the remaining bits.

    Here's how to convert a decimal number to thermometric code:

    Basic Conversion Process:

    For a decimal number n and a code width of m bits:

    • Set the first n bits to 1
    • Set the remaining (m - n) bits to 0

    Example Conversions:

    For a 4-bit thermometric code:

    • 0 → 0000
    • 1 → 1000
    • 2 → 1100
    • 3 → 1110
    • 4 → 1111

    For an 8-bit thermometric code:

    • 0 → 00000000
    • 3 → 11100000
    • 5 → 11111000
    • 8 → 11111111

    Implementation in Python:

    def decimal_to_thermometric(decimal_num, bit_width):
        if decimal_num > bit_width:
            raise ValueError("Decimal number exceeds bit width")
        if decimal_num < 0:
            raise ValueError("Decimal number must be non-negative")
        
        # Create thermometric code
        thermometric = '1' * decimal_num + '0' * (bit_width - decimal_num)
        return thermometric
    
    # Examples
    print(decimal_to_thermometric(3, 8))  # Output: 11100000
    print(decimal_to_thermometric(5, 8))  # Output: 11111000
    

    Implementation in Hardware (Verilog):

    module decimal_to_thermometric #(
        parameter WIDTH = 8
    )(
        input [3:0] decimal_in,  // Assuming max value is 15
        output reg [WIDTH-1:0] thermo_out
    );
    
    always @(*) begin
        thermo_out = 0;
        for (integer i = 0; i < WIDTH; i = i + 1) begin
            if (i < decimal_in)
                thermo_out[WIDTH-1-i] = 1'b1;
        end
    end
    
    endmodule
    

    Thermometric codes are commonly used in flash ADCs, priority encoders, and other digital circuits where a monotonic representation is beneficial.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.