Skip to content
The Chat Archive
claude-opus-4-20250514-thinking-16k· Anthropic LMArena Human Preference 140K

Создать программы с графическим интерфейсом с использованием компонента RaduioButton для…

  1. User

    Создать программы с графическим интерфейсом с использованием компонента RaduioButton для переключения режима вывода данных согласно варианту и режима изменения данных для расчёта на языке scilab

  2. Assistant

    Вот пример программы на Scilab с графическим интерфейсом, использующей RadioButton для переключения режимов:

    // Программа с GUI и RadioButton для переключения режимов
    clear; clc; close;
    
    // Глобальные переменные
    global output_mode calc_mode;
    output_mode = 1; // 1-таблица, 2-график, 3-текст
    calc_mode = 1;   // 1-линейный, 2-квадратичный, 3-кубический
    
    // Создание главного окна
    fig = figure('position', [100 100 800 600], ...
                'figure_name', 'Программа с переключением режимов', ...
                'BackgroundColor', [0.9 0.9 0.9]);
    
    // Создание фреймов для группировки элементов
    // Фрейм для режима вывода
    frame_output = uicontrol(fig, 'style', 'frame', ...
                            'position', [20 450 250 120], ...
                            'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(fig, 'style', 'text', ...
             'position', [30 540 230 20], ...
             'string', 'Режим вывода данных:', ...
             'horizontalalignment', 'left', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    // RadioButton для режима вывода
    radio_table = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 510 200 20], ...
                           'string', 'Таблица', ...
                           'value', 1, ...
                           'callback', 'output_mode=1; update_radio_output();');
    
    radio_graph = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 480 200 20], ...
                           'string', 'График', ...
                           'value', 0, ...
                           'callback', 'output_mode=2; update_radio_output();');
    
    radio_text = uicontrol(fig, 'style', 'radiobutton', ...
                          'position', [40 450 200 20], ...
                          'string', 'Текстовый вывод', ...
                          'value', 0, ...
                          'callback', 'output_mode=3; update_radio_output();');
    
    // Фрейм для режима расчёта
    frame_calc = uicontrol(fig, 'style', 'frame', ...
                          'position', [20 300 250 120], ...
                          'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(fig, 'style', 'text', ...
             'position', [30 390 230 20], ...
             'string', 'Режим расчёта:', ...
             'horizontalalignment', 'left', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    // RadioButton для режима расчёта
    radio_linear = uicontrol(fig, 'style', 'radiobutton', ...
                            'position', [40 360 200 20], ...
                            'string', 'Линейная функция (y=ax+b)', ...
                            'value', 1, ...
                            'callback', 'calc_mode=1; update_radio_calc();');
    
    radio_quad = uicontrol(fig, 'style', 'radiobutton', ...
                          'position', [40 330 200 20], ...
                          'string', 'Квадратичная (y=ax²+bx+c)', ...
                          'value', 0, ...
                          'callback', 'calc_mode=2; update_radio_calc();');
    
    radio_cubic = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 300 200 20], ...
                           'string', 'Кубическая (y=ax³+bx²+cx+d)', ...
                           'value', 0, ...
                           'callback', 'calc_mode=3; update_radio_calc();');
    
    // Поля ввода параметров
    uicontrol(fig, 'style', 'text', ...
             'position', [30 250 100 20], ...
             'string', 'Параметры:', ...
             'horizontalalignment', 'left');
    
    // Метки и поля ввода
    uicontrol(fig, 'style', 'text', ...
             'position', [30 220 30 20], ...
             'string', 'a =');
    edit_a = uicontrol(fig, 'style', 'edit', ...
                       'position', [65 220 50 20], ...
                       'string', '2');
    
    uicontrol(fig, 'style', 'text', ...
             'position', [130 220 30 20], ...
             'string', 'b =');
    edit_b = uicontrol(fig, 'style', 'edit', ...
                       'position', [165 220 50 20], ...
                       'string', '3');
    
    uicontrol(fig, 'style', 'text', ...
             'position', [30 190 30 20], ...
             'string', 'c =');
    edit_c = uicontrol(fig, 'style', 'edit', ...
                       'position', [65 190 50 20], ...
                       'string', '1');
    
    uicontrol(fig, 'style', 'text', ...
             'position', [130 190 30 20], ...
             'string', 'd =');
    edit_d = uicontrol(fig, 'style', 'edit', ...
                       'position', [165 190 50 20], ...
                       'string', '0');
    
    // Диапазон X
    uicontrol(fig, 'style', 'text', ...
             'position', [30 150 100 20], ...
             'string', 'Диапазон X:');
    
    uicontrol(fig, 'style', 'text', ...
             'position', [30 120 40 20], ...
             'string', 'От:');
    edit_xmin = uicontrol(fig, 'style', 'edit', ...
                          'position', [75 120 50 20], ...
                          'string', '-10');
    
    uicontrol(fig, 'style', 'text', ...
             'position', [130 120 40 20], ...
             'string', 'До:');
    edit_xmax = uicontrol(fig, 'style', 'edit', ...
                          'position', [175 120 50 20], ...
                          'string', '10');
    
    // Кнопка расчёта
    btn_calc = uicontrol(fig, 'style', 'pushbutton', ...
                         'position', [50 50 170 40], ...
                         'string', 'Выполнить расчёт', ...
                         'callback', 'perform_calculation()');
    
    // Область вывода результатов
    axes_result = newaxes();
    axes_result.margins = [0.1 0.1 0.1 0.1];
    axes_result.axes_bounds = [0.4 0.1 0.55 0.8];
    
    // Функции обновления RadioButton
    function update_radio_output()
        global output_mode;
        radio_table.value = (output_mode == 1);
        radio_graph.value = (output_mode == 2);
        radio_text.value = (output_mode == 3);
    endfunction
    
    function update_radio_calc()
        global calc_mode;
        radio_linear.value = (calc_mode == 1);
        radio_quad.value = (calc_mode == 2);
        radio_cubic.value = (calc_mode == 3);
        
        // Обновление доступности полей ввода
        if calc_mode == 1 then
            edit_c.enable = 'off';
            edit_d.enable = 'off';
        elseif calc_mode == 2 then
            edit_c.enable = 'on';
            edit_d.enable = 'off';
        else
            edit_c.enable = 'on';
            edit_d.enable = 'on';
        end
    endfunction
    
    // Основная функция расчёта
    function perform_calculation()
        global output_mode calc_mode;
        
        // Получение параметров
        a = evstr(edit_a.string);
        b = evstr(edit_b.string);
        c = evstr(edit_c.string);
        d = evstr(edit_d.string);
        xmin = evstr(edit_xmin.string);
        xmax = evstr(edit_xmax.string);
        
        // Генерация данных
        x = linspace(xmin, xmax, 50);
        
        // Расчёт в зависимости от режима
        select calc_mode
        case 1 // Линейная
            y = a*x + b;
            formula = sprintf('y = %.2fx + %.2f', a, b);
        case 2 // Квадратичная
            y = a*x.^2 + b*x + c;
            formula = sprintf('y = %.2fx² + %.2fx + %.2f', a, b, c);
        case 3 // Кубическая
            y = a*x.^3 + b*x.^2 + c*x + d;
            formula = sprintf('y = %.2fx³ + %.2fx² + %.2fx + %.2f', a, b, c, d);
        end
        
        // Вывод результатов в зависимости от режима
        sca(axes_result);
        clf();
        
        select output_mode
        case 1 // Таблица
            // Создание таблицы данных
            n_points = 10; // Количество точек для таблицы
            x_table = linspace(xmin, xmax, n_points);
            
            select calc_mode
            case 1
                y_table = a*x_table + b;
            case 2
                y_table = a*x_table.^2 + b*x_table + c;
            case 3
                y_table = a*x_table.^3 + b*x_table.^2 + c*x_table + d;
            end
            
            // Отображение таблицы
            xtitle('Таблица значений: ' + formula);
            plot2d([], [], rect=[0,0,1,1], axesflag=0);
            
            // Заголовки
            xstring(0.2, 0.9, 'X');
            xstring(0.6, 0.9, 'Y');
            
            // Данные таблицы
            for i = 1:n_points
                y_pos = 0.85 - i*0.08;
                xstring(0.2, y_pos, sprintf('%.2f', x_table(i)));
                xstring(0.6, y_pos, sprintf('%.4f', y_table(i)));
            end
            
        case 2 // График
            plot(x, y, 'b-', 'LineWidth', 2);
            xlabel('X');
            ylabel('Y');
            title('График функции: ' + formula);
            xgrid();
            
        case 3 // Текстовый вывод
            xtitle('Текстовый вывод результатов');
            plot2d([], [], rect=[0,0,1,1], axesflag=0);
            
            // Вывод информации
            xstring(0.1, 0.9, 'Функция: ' + formula);
            xstring(0.1, 0.8, sprintf('Диапазон X: от %.2f до %.2f', xmin, xmax));
            xstring(0.1, 0.7, sprintf('Минимальное Y: %.4f', min(y)));
            xstring(0.1, 0.6, sprintf('Максимальное Y: %.4f', max(y)));
            xstring(0.1, 0.5, sprintf('Среднее Y: %.4f', mean(y)));
            
            // Поиск корней для линейной функции
            if calc_mode == 1 & a ~= 0 then
                root = -b/a;
                xstring(0.1, 0.4, sprintf('Корень уравнения: x = %.4f', root));
            end
        end
    endfunction
    
    // Инициализация
    update_radio_calc();
    

    Эта программа демонстрирует:

    1. Использование RadioButton для переключения режимов вывода:

      • Таблица значений
      • График функции
      • Текстовый вывод с характеристиками
    2. Использование RadioButton для выбора типа функции:

      • Линейная (y = ax + b)
      • Квадратичная (y = ax² + bx + c)
      • Кубическая (y = ax³ + bx² + cx + d)
    3. Динамическое управление интерфейсом:

      • Поля ввода активируются/деактивируются в зависимости от выбранной функции
      • RadioButton работают как группы (только один может быть выбран)
    4. Различные способы отображения результатов:

      • Таблица с числовыми значениями
      • График функции
      • Текстовая информация с характеристиками

    Программа позволяет изменять параметры функций и диапазон X, а затем отображать результаты в выбранном формате.

  3. User

    у меня есть файлы с решением задач для них нужно создать граф интерфейс. Вот код из этих файлов. Файл 1: // Параметры задачи N = 15; a = -%pi/2; b = %pi/2;

    // Создаем массив x значений и вычисляем f(x) x_values = linspace(a, b, N); y_values = ((x_values.^2 + 1).^(1/3)) ./ (0.5 + sqrt(abs(x_values) + 0.5)) .* x_values ./ (1 + sin(x_values).^2);

    // Выводим таблицу значений disp(" x f(x)"); disp("------------------"); for i = 1:N printf("%8.4f %8.4f\n", x_values(i), y_values(i)); end

    // Строим график с легендой clf(); plot(x_values, y_values, 'r-', 'LineWidth', 2); xlabel('x', 'fontsize', 3); ylabel('f(x)', 'fontsize', 3); title('График функции f(x)', 'fontsize', 3); xgrid();

    // Добавляем легенду (после plot, перед show) legend(['f(x)'], 2); Файл 2:// Параметры задачи N = 100; // Количество точек для графика M = 4; // Количество значений для вывода

    // Границы отрезка a = -2*%pi; b = 2*%pi;

    // 1. Вычисляем M значений функции x_values = linspace(a, b, M); y_values = linspace(a, b, M);

    // Вычисляем функцию в точках disp("Вычисленные значения:"); disp(" x y f(x,y)"); disp("----------------------------"); for i = 1:M x = x_values(i); y = y_values(i); f = 5x^2 - 2y^2 + x*y; printf("%7.4f %7.4f %9.4f\n", x, y, f); end

    // 2. Строим график по N точкам x_plot = linspace(a, b, N); y_plot = linspace(a, b, N); [X, Y] = ndgrid(x_plot, y_plot); Z = 5X.^2 - 2Y.^2 + X.*Y;

    // Создаем 3D график clf(); plot3d(x_plot, y_plot, Z); xlabel("x", "fontsize", 3); ylabel("y", "fontsize", 3); zlabel("f(x,y)", "fontsize", 3); title("График функции f(x,y) = 5x² - 2y² + xy", "fontsize", 3); colorbar(); Файл 3: // Заданная матрица m = [1 2 4 6; 1 -3 7 -9; 21 17 13 11; -6 -4 -2 -1];

    // 1. Находим обратную матрицу m_inv = inv(m);

    // 2. Проверяем правильность вычислений check = m * m_inv; // Должно получиться единичная матрица

    // Выводим результаты disp("Исходная матрица:"); disp(m);

    disp("Обратная матрица:"); disp(m_inv);

    disp("Проверка (должна быть единичная матрица):"); disp(clean(check)); // clean убирает очень малые числа (ошибки округления)

    // 3. Дополнительная проверка через определитель det_m = det(m); disp("Определитель исходной матрицы:"); disp(det_m);

  4. Assistant

    Вот программа с графическим интерфейсом для ваших трех задач с использованием RadioButton:

    // Программа с GUI для трех задач
    clear; clc; close;
    
    // Глобальные переменные
    global task_mode;
    task_mode = 1; // 1-функция одной переменной, 2-функция двух переменных, 3-обратная матрица
    
    // Создание главного окна
    fig = figure('position', [50 50 900 700], ...
                'figure_name', 'Решение задач с графическим интерфейсом', ...
                'BackgroundColor', [0.9 0.9 0.9]);
    
    // Фрейм для выбора задачи
    frame_task = uicontrol(fig, 'style', 'frame', ...
                          'position', [20 550 300 130], ...
                          'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(fig, 'style', 'text', ...
             'position', [30 650 280 20], ...
             'string', 'Выберите задачу:', ...
             'horizontalalignment', 'left', ...
             'BackgroundColor', [0.85 0.85 0.85], ...
             'fontsize', 12, 'fontweight', 'bold');
    
    // RadioButton для выбора задачи
    radio_task1 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 620 260 20], ...
                           'string', 'Функция одной переменной', ...
                           'value', 1, ...
                           'callback', 'task_mode=1; update_interface();');
    
    radio_task2 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 590 260 20], ...
                           'string', 'Функция двух переменных', ...
                           'value', 0, ...
                           'callback', 'task_mode=2; update_interface();');
    
    radio_task3 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 560 260 20], ...
                           'string', 'Обратная матрица', ...
                           'value', 0, ...
                           'callback', 'task_mode=3; update_interface();');
    
    // Панель параметров для задачи 1
    panel_task1 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры функции f(x)', ...
                         'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 290 280 40], ...
             'string', 'f(x) = ((x²+1)^(1/3)) / (0.5+√(|x|+0.5)) * x / (1+sin²(x))', ...
             'horizontalalignment', 'center', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 250 100 20], ...
             'string', 'Количество точек N:');
    edit1_N = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 250 60 20], ...
                        'string', '15');
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 220 100 20], ...
             'string', 'Начало отрезка a:');
    edit1_a = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 220 60 20], ...
                        'string', '-1.5708');
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 190 100 20], ...
             'string', 'Конец отрезка b:');
    edit1_b = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 190 60 20], ...
                        'string', '1.5708');
    
    check1_table = uicontrol(panel_task1, 'style', 'checkbox', ...
                            'position', [10 150 150 20], ...
                            'string', 'Показать таблицу', ...
                            'value', 1);
    
    check1_graph = uicontrol(panel_task1, 'style', 'checkbox', ...
                            'position', [10 120 150 20], ...
                            'string', 'Показать график', ...
                            'value', 1);
    
    // Панель параметров для задачи 2
    panel_task2 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры функции f(x,y)', ...
                         'BackgroundColor', [0.85 0.85 0.85], ...
                         'visible', 'off');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 290 280 30], ...
             'string', 'f(x,y) = 5x² - 2y² + xy', ...
             'horizontalalignment', 'center', ...
             'fontsize', 12, ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 250 150 20], ...
             'string', 'Точек для графика N:');
    edit2_N = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 250 60 20], ...
                        'string', '50');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 220 150 20], ...
             'string', 'Точек для таблицы M:');
    edit2_M = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 220 60 20], ...
                        'string', '4');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 190 150 20], ...
             'string', 'Начало отрезка a:');
    edit2_a = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 190 60 20], ...
                        'string', '-6.2832');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 160 150 20], ...
             'string', 'Конец отрезка b:');
    edit2_b = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 160 60 20], ...
                        'string', '6.2832');
    
    // Панель параметров для задачи 3
    panel_task3 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры матрицы', ...
                         'BackgroundColor', [0.85 0.85 0.85], ...
                         'visible', 'off');
    
    uicontrol(panel_task3, 'style', 'text', ...
             'position', [10 290 280 20], ...
             'string', 'Введите элементы матрицы 4x4:', ...
             'horizontalalignment', 'center', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    // Создание полей для ввода матрицы 4x4
    edit_matrix = [];
    for i = 1:4
        for j = 1:4
            edit_matrix(i,j) = uicontrol(panel_task3, 'style', 'edit', ...
                                         'position', [20 + (j-1)*65, 260 - (i-1)*30, 50, 25], ...
                                         'string', '0');
        end
    end
    
    // Заполнение матрицы значениями по умолчанию
    default_matrix = [1  2  4  6;
                     1 -3  7 -9;
                     21 17 13 11;
                     -6 -4 -2 -1];
                     
    for i = 1:4
        for j = 1:4
            set(edit_matrix(i,j), 'string', string(default_matrix(i,j)));
        end
    end
    
    btn_default = uicontrol(panel_task3, 'style', 'pushbutton', ...
                           'position', [60 100 180 30], ...
                           'string', 'Использовать матрицу по умолчанию', ...
                           'callback', 'set_default_matrix()');
    
    // Кнопка выполнения расчета
    btn_calc = uicontrol(fig, 'style', 'pushbutton', ...
                         'position', [75 150 190 40], ...
                         'string', 'Выполнить расчёт', ...
                         'fontsize', 12, ...
                         'callback', 'perform_calculation()');
    
    // Область для вывода результатов
    axes_result = newaxes();
    axes_result.margins = [0.1 0.1 0.1 0.1];
    axes_result.axes_bounds = [0.4 0.05 0.55 0.9];
    
    // Текстовая область для вывода
    text_output = uicontrol(fig, 'style', 'text', ...
                           'position', [350 20 530 120], ...
                           'horizontalalignment', 'left', ...
                           'fontsize', 10, ...
                           'BackgroundColor', 'white', ...
                           'visible', 'off');
    
    // Функция обновления интерфейса
    function update_interface()
        global task_mode;
        
        // Обновление RadioButton
        radio_task1.value = (task_mode == 1);
        radio_task2.value = (task_mode == 2);
        radio_task3.value = (task_mode == 3);
        
        // Показываем/скрываем панели
        panel_task1.visible = (task_mode == 1) ? 'on' : 'off';
        panel_task2.visible = (task_mode == 2) ? 'on' : 'off';
        panel_task3.visible = (task_mode == 3) ? 'on' : 'off';
        
        // Очистка области результатов
        sca(axes_result);
        clf();
        text_output.visible = 'off';
    endfunction
    
    // Функция установки матрицы по умолчанию
    function set_default_matrix()
        default_matrix = [1  2  4  6;
                         1 -3  7 -9;
                         21 17 13 11;
                         -6 -4 -2 -1];
        for i = 1:4
            for j = 1:4
                set(edit_matrix(i,j), 'string', string(default_matrix(i,j)));
            end
        end
    endfunction
    
    // Основная функция расчета
    function perform_calculation()
        global task_mode;
        
        sca(axes_result);
        clf();
        
        select task_mode
        case 1 // Функция одной переменной
            // Получение параметров
            N = evstr(edit1_N.string);
            a = evstr(edit1_a.string);
            b = evstr(edit1_b.string);
            show_table = check1_table.value;
            show_graph = check1_graph.value;
            
            // Вычисления
            x_values = linspace(a, b, N);
            y_values = ((x_values.^2 + 1).^(1/3)) ./ (0.5 + sqrt(abs(x_values) + 0.5)) .* x_values ./ (1 + sin(x_values).^2);
            
            if show_graph then
                plot(x_values, y_values, 'r-', 'LineWidth', 2);
                xlabel('x', 'fontsize', 3);
                ylabel('f(x)', 'fontsize', 3);
                title('График функции f(x)', 'fontsize', 3);
                xgrid();
                legend(['f(x)'], 2);
            end
            
            if show_table then
                text_output.visible = 'on';
                table_str = "Таблица значений:\n";
                table_str = table_str + "    x           f(x)\n";
                table_str = table_str + "------------------------\n";
                for i = 1:min(N, 10) // Показываем первые 10 значений
                    table_str = table_str + sprintf("%8.4f     %8.4f\n", x_values(i), y_values(i));
                end
                if N > 10 then
                    table_str = table_str + "... (показаны первые 10 из " + string(N) + " значений)";
                end
                text_output.string = table_str;
            end
            
        case 2 // Функция двух переменных
            // Получение параметров
            N = evstr(edit2_N.string);
            M = evstr(edit2_M.string);
            a = evstr(edit2_a.string);
            b = evstr(edit2_b.string);
            
            // Вычисления для таблицы
            x_values = linspace(a, b, M);
            y_values = linspace(a, b, M);
            
            // Построение 3D графика
            x_plot = linspace(a, b, N);
            y_plot = linspace(a, b, N);
            [X, Y] = ndgrid(x_plot, y_plot);
            Z = 5*X.^2 - 2*Y.^2 + X.*Y;
            
            plot3d(x_plot, y_plot, Z);
            xlabel("x", "fontsize", 3);
            ylabel("y", "fontsize", 3);
            zlabel("f(x,y)", "fontsize", 3);
            title("График функции f(x,y) = 5x² - 2y² + xy", "fontsize", 3);
            colorbar();
            
            // Вывод таблицы значений
            text_output.visible = 'on';
            table_str = "Вычисленные значения:\n";
            table_str = table_str + "    x           y         f(x,y)\n";
            table_str = table_str + "-----------------------------------\n";
            for i = 1:M
                x = x_values(i);
                y = y_values(i);
                f = 5*x^2 - 2*y^2 + x*y;
                table_str = table_str + sprintf("%7.4f    %7.4f    %9.4f\n", x, y, f);
            end
            text_output.string = table_str;
            
        case 3 // Обратная матрица
            // Получение матрицы из полей ввода
            m = [];
            for i = 1:4
                for j = 1:4
                    m(i,j) = evstr(get(edit_matrix(i,j), 'string'));
                end
            end
            
            // Проверка определителя
            det_m = det(m);
            
            if abs(det_m) < 1e-10 then
                text_output.visible = 'on';
                text_output.string = "ОШИБКА: Матрица вырожденная (определитель ≈ 0).\nОбратная матрица не существует!";
                return;
            end
            
            // Вычисление обратной матрицы
            m_inv = inv(m);
            
            // Проверка
            check = m * m_inv;
            
            // Визуализация матриц
            subplot(2,2,1);
            Matplot(m);
            xtitle("Исходная матрица");
            
            subplot(2,2,2);
            Matplot(m_inv);
            xtitle("Обратная матрица");
            
            subplot(2,2,3);
            Matplot(clean(check));
            xtitle("Проверка (M * M⁻¹)");
            
            // Текстовый вывод
            text_output.visible = 'on';
            output_str = sprintf("Определитель исходной матрицы: %.6f\n", det_m);
            output_str = output_str + "\nМаксимальная ошибка в единичной матрице: ";
            output_str = output_str + sprintf("%.2e", max(abs(check - eye(4,4))));
            text_output.string = output_str;
        end
    endfunction
    

    Эта программа создает единый интерфейс для всех трех задач с следующими возможностями:

    1. RadioButton для выбора задачи - переключение между тремя задачами
    2. Динамические панели параметров - для каждой задачи своя панель с соответствующими полями ввода
    3. Универсальная область вывода - адаптируется под тип задачи (графики 2D/3D, таблицы)
    4. Сохранение оригинальной логики - все вычисления выполняются так же, как в исходных файлах

    Особенности реализации:

    • Для задачи 1: можно выбрать отображение таблицы и/или графика
    • Для задачи 2: автоматически строится 3D график и выводится таблица значений
    • Для задачи 3: визуализация матриц и проверка корректности вычислений
  5. User

    в первом и во втором случае должен быть еще выбор чтобы выводилась таблица со значениями x и y

  6. Assistant

    Вот обновленная версия программы с улучшенным выводом таблиц для первой и второй задачи:

    // Программа с GUI для трех задач
    clear; clc; close;
    
    // Глобальные переменные
    global task_mode;
    task_mode = 1; // 1-функция одной переменной, 2-функция двух переменных, 3-обратная матрица
    
    // Создание главного окна
    fig = figure('position', [50 50 900 700], ...
                'figure_name', 'Решение задач с графическим интерфейсом', ...
                'BackgroundColor', [0.9 0.9 0.9]);
    
    // Фрейм для выбора задачи
    frame_task = uicontrol(fig, 'style', 'frame', ...
                          'position', [20 550 300 130], ...
                          'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(fig, 'style', 'text', ...
             'position', [30 650 280 20], ...
             'string', 'Выберите задачу:', ...
             'horizontalalignment', 'left', ...
             'BackgroundColor', [0.85 0.85 0.85], ...
             'fontsize', 12, 'fontweight', 'bold');
    
    // RadioButton для выбора задачи
    radio_task1 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 620 260 20], ...
                           'string', 'Функция одной переменной', ...
                           'value', 1, ...
                           'callback', 'task_mode=1; update_interface();');
    
    radio_task2 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 590 260 20], ...
                           'string', 'Функция двух переменных', ...
                           'value', 0, ...
                           'callback', 'task_mode=2; update_interface();');
    
    radio_task3 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 560 260 20], ...
                           'string', 'Обратная матрица', ...
                           'value', 0, ...
                           'callback', 'task_mode=3; update_interface();');
    
    // Панель параметров для задачи 1
    panel_task1 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры функции f(x)', ...
                         'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 290 280 40], ...
             'string', 'f(x) = ((x²+1)^(1/3)) / (0.5+√(|x|+0.5)) * x / (1+sin²(x))', ...
             'horizontalalignment', 'center', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 250 100 20], ...
             'string', 'Количество точек N:');
    edit1_N = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 250 60 20], ...
                        'string', '15');
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 220 100 20], ...
             'string', 'Начало отрезка a:');
    edit1_a = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 220 60 20], ...
                        'string', '-1.5708');
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 190 100 20], ...
             'string', 'Конец отрезка b:');
    edit1_b = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 190 60 20], ...
                        'string', '1.5708');
    
    // Фрейм для режима вывода задачи 1
    frame1_output = uicontrol(panel_task1, 'style', 'frame', ...
                             'position', [10 70 280 70], ...
                             'BackgroundColor', [0.8 0.8 0.8]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [20 110 100 20], ...
             'string', 'Режим вывода:', ...
             'BackgroundColor', [0.8 0.8 0.8]);
    
    radio1_table = uicontrol(panel_task1, 'style', 'radiobutton', ...
                            'position', [130 110 100 20], ...
                            'string', 'Таблица', ...
                            'value', 1, ...
                            'BackgroundColor', [0.8 0.8 0.8]);
    
    radio1_graph = uicontrol(panel_task1, 'style', 'radiobutton', ...
                            'position', [130 80 100 20], ...
                            'string', 'График', ...
                            'value', 0, ...
                            'BackgroundColor', [0.8 0.8 0.8]);
    
    // Панель параметров для задачи 2
    panel_task2 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры функции f(x,y)', ...
                         'BackgroundColor', [0.85 0.85 0.85], ...
                         'visible', 'off');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 290 280 30], ...
             'string', 'f(x,y) = 5x² - 2y² + xy', ...
             'horizontalalignment', 'center', ...
             'fontsize', 12, ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 250 150 20], ...
             'string', 'Точек для графика N:');
    edit2_N = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 250 60 20], ...
                        'string', '50');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 220 150 20], ...
             'string', 'Точек для таблицы M:');
    edit2_M = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 220 60 20], ...
                        'string', '4');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 190 150 20], ...
             'string', 'Начало отрезка a:');
    edit2_a = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 190 60 20], ...
                        'string', '-6.2832');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 160 150 20], ...
             'string', 'Конец отрезка b:');
    edit2_b = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 160 60 20], ...
                        'string', '6.2832');
    
    // Фрейм для режима вывода задачи 2
    frame2_output = uicontrol(panel_task2, 'style', 'frame', ...
                             'position', [10 70 280 70], ...
                             'BackgroundColor', [0.8 0.8 0.8]);
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [20 110 100 20], ...
             'string', 'Режим вывода:', ...
             'BackgroundColor', [0.8 0.8 0.8]);
    
    radio2_table = uicontrol(panel_task2, 'style', 'radiobutton', ...
                            'position', [130 110 100 20], ...
                            'string', 'Таблица', ...
                            'value', 1, ...
                            'BackgroundColor', [0.8 0.8 0.8]);
    
    radio2_graph = uicontrol(panel_task2, 'style', 'radiobutton', ...
                            'position', [130 80 100 20], ...
                            'string', '3D График', ...
                            'value', 0, ...
                            'BackgroundColor', [0.8 0.8 0.8]);
    
    // Панель параметров для задачи 3
    panel_task3 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры матрицы', ...
                         'BackgroundColor', [0.85 0.85 0.85], ...
                         'visible', 'off');
    
    uicontrol(panel_task3, 'style', 'text', ...
             'position', [10 290 280 20], ...
             'string', 'Введите элементы матрицы 4x4:', ...
             'horizontalalignment', 'center', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    // Создание полей для ввода матрицы 4x4
    edit_matrix = [];
    for i = 1:4
        for j = 1:4
            edit_matrix(i,j) = uicontrol(panel_task3, 'style', 'edit', ...
                                         'position', [20 + (j-1)*65, 260 - (i-1)*30, 50, 25], ...
                                         'string', '0');
        end
    end
    
    // Заполнение матрицы значениями по умолчанию
    default_matrix = [1  2  4  6;
                     1 -3  7 -9;
                     21 17 13 11;
                     -6 -4 -2 -1];
                     
    for i = 1:4
        for j = 1:4
            set(edit_matrix(i,j), 'string', string(default_matrix(i,j)));
        end
    end
    
    btn_default = uicontrol(panel_task3, 'style', 'pushbutton', ...
                           'position', [60 100 180 30], ...
                           'string', 'Использовать матрицу по умолчанию', ...
                           'callback', 'set_default_matrix()');
    
    // Кнопка выполнения расчета
    btn_calc = uicontrol(fig, 'style', 'pushbutton', ...
                         'position', [75 150 190 40], ...
                         'string', 'Выполнить расчёт', ...
                         'fontsize', 12, ...
                         'callback', 'perform_calculation()');
    
    // Область для вывода результатов
    axes_result = newaxes();
    axes_result.margins = [0.1 0.1 0.1 0.1];
    axes_result.axes_bounds = [0.4 0.05 0.55 0.9];
    
    // Listbox для вывода таблицы
    list_table = uicontrol(fig, 'style', 'listbox', ...
                          'position', [350 50 530 600], ...
                          'fontname', 'monospace', ...
                          'fontsize', 10, ...
                          'visible', 'off');
    
    // Функция обновления интерфейса
    function update_interface()
        global task_mode;
        
        // Обновление RadioButton
        radio_task1.value = (task_mode == 1);
        radio_task2.value = (task_mode == 2);
        radio_task3.value = (task_mode == 3);
        
        // Показываем/скрываем панели
        panel_task1.visible = (task_mode == 1) ? 'on' : 'off';
        panel_task2.visible = (task_mode == 2) ? 'on' : 'off';
        panel_task3.visible = (task_mode == 3) ? 'on' : 'off';
        
        // Очистка области результатов
        sca(axes_result);
        clf();
        list_table.visible = 'off';
    endfunction
    
    // Функция установки матрицы по умолчанию
    function set_default_matrix()
        default_matrix = [1  2  4  6;
                         1 -3  7 -9;
                         21 17 13 11;
                         -6 -4 -2 -1];
        for i = 1:4
            for j = 1:4
                set(edit_matrix(i,j), 'string', string(default_matrix(i,j)));
            end
        end
    endfunction
    
    // Обработчики для RadioButton режима вывода
    radio1_table.callback = 'radio1_table.value=1; radio1_graph.value=0;';
    radio1_graph.callback = 'radio1_table.value=0; radio1_graph.value=1;';
    radio2_table.callback = 'radio2_table.value=1; radio2_graph.value=0;';
    radio2_graph.callback = 'radio2_table.value=0; radio2_graph.value=1;';
    
    // Основная функция расчета
    function perform_calculation()
        global task_mode;
        
        sca(axes_result);
        clf();
        list_table.visible = 'off';
        
        select task_mode
        case 1 // Функция одной переменной
            // Получение параметров
            N = evstr(edit1_N.string);
            a = evstr(edit1_a.string);
            b = evstr(edit1_b.string);
            show_table = radio1_table.value;
            show_graph = radio1_graph.value;
            
            // Вычисления
            x_values = linspace(a, b, N);
            y_values = ((x_values.^2 + 1).^(1/3)) ./ (0.5 + sqrt(abs(x_values) + 0.5)) .* x_values ./ (1 + sin(x_values).^2);
            
            if show_graph then
                axes_result.visible = 'on';
                plot(x_values, y_values, 'r-', 'LineWidth', 2);
                xlabel('x', 'fontsize', 3);
                ylabel('f(x)', 'fontsize', 3);
                title('График функции f(x)', 'fontsize', 3);
                xgrid();
                legend(['f(x)'], 2);
            else
                axes_result.visible = 'off';
            end
            
            if show_table then
                list_table.visible = 'on';
                table_data = [];
                table_data($+1) = "  Таблица значений функции f(x)";
                table_data($+1) = "  ================================";
                table_data($+1) = sprintf("  %12s    %12s", "x", "f(x)");
                table_data($+1) = "  --------------------------------";
                for i = 1:N
                    table_data($+1) = sprintf("  %12.6f    %12.6f", x_values(i), y_values(i));
                end
                list_table.string = table_data;
            end
            
        case 2 // Функция двух переменных
            // Получение параметров
            N = evstr(edit2_N.string);
            M = evstr(edit2_M.string);
            a = evstr(edit2_a.string);
            b = evstr(edit2_b.string);
            show_table = radio2_table.value;
            show_graph = radio2_graph.value;
            
            if show_graph then
                axes_result.visible = 'on';
                // Построение 3D графика
                x_plot = linspace(a, b, N);
                y_plot = linspace(a, b, N);
                [X, Y] = ndgrid(x_plot, y_plot);
                Z = 5*X.^2 - 2*Y.^2 + X.*Y;
                
                plot3d(x_plot, y_plot, Z);
                xlabel("x", "fontsize", 3);
                ylabel("y", "fontsize", 3);
                zlabel("f(x,y)", "fontsize", 3);
                title("График функции f(x,y) = 5x² - 2y² + xy", "fontsize", 3);
                colorbar();
            else
                axes_result.visible = 'off';
            end
            
            if show_table then
                list_table.visible = 'on';
                // Вычисления для таблицы
                x_values = linspace(a, b, M);
                y_values = linspace(a, b, M);
                
                table_data = [];
                table_data($+1) = "  Таблица значений функции f(x,y) = 5x² - 2y² + xy";
                table_data($+1) = "  =================================================";
                table_data($+1) = sprintf("  %10s    %10s    %12s", "x", "y", "f(x,y)");
                table_data($+1) = "  -------------------------------------------------";
                for i = 1:M
                    x = x_values(i);
                    y = y_values(i);
                    f = 5*x^2 - 2*y^2 + x*y;
                    table_data($+1) = sprintf("  %10.4f    %10.4f    %12.4f", x, y, f);
                end
                list_table.string = table_data;
            end
            
        case 3 // Обратная матрица
            axes_result.visible = 'on';
            // Получение матрицы из полей ввода
            m = [];
            for i = 1:4
                for j = 1:4
                    m(i,j) = evstr(get(edit_matrix(i,j), 'string'));
                end
            end
            
            // Проверка определителя
            det_m = det(m);
            
            if abs(det_m) < 1e-10 then
                list_table.visible = 'on';
                list_table.string = ["ОШИБКА: Матрица вырожденная (определитель ≈ 0)."; ...
                                    "Обратная матрица не существует!"];
                return;
            end
            
            // Вычисление обратной матрицы
            m_inv = inv(m);
            
            // Проверка
            check = m * m_inv;
            
            // Визуализация матриц
            subplot(2,2,1);
            Matplot(m);
            xtitle("Исходная матрица");
            
            subplot(2,2,2);
            Matplot(m_inv);
            xtitle("Обратная матрица");
            
            subplot(2,2,3);
            Matplot(clean(check));
            xtitle("Проверка (M * M⁻¹)");
            
            // Текстовый вывод результатов
            subplot(2,2,4);
            plot2d([], [], rect=[0,0,1,1], axesflag=0);
            xstring(0.1, 0.8, sprintf("Определитель: %.6f", det_m));
            xstring(0.1, 0.6, "Максимальная ошибка");
            xstring(0.1, 0.5, "в единичной матрице:");
            xstring(0.1, 0.3, sprintf("%.2e", max(abs(check - eye(4,4)))));
        end
    endfunction
    

    Основные изменения и улучшения:

    1. RadioButton для режима вывода в задаче 1:

      • Переключение между таблицей и графиком
      • Таблица отображается в отдельном listbox с форматированным выводом
    2. RadioButton для режима вывода в задаче 2:

      • Переключение между таблицей и 3D графиком
      • Таблица показывает значения x, y и f(x,y)
    3. Улучшенный вывод таблиц:

      • Использование listbox для лучшего отображения табличных данных
      • Форматированный вывод с заголовками и разделителями
      • Моноширинный шрифт для выравнивания столбцов
    4. Динамическое управление видимостью:

      • График и таблица скрываются/показываются в зависимости от выбранного режима
      • Каждая задача имеет свои независимые настройки вывода

    Теперь пользователь может выбирать для каждой задачи, хочет ли он видеть таблицу значений или график (или 3D график для второй задачи).

  7. User

    можешь убрать одновременный выбор нескольких задач

  8. Assistant

    Вот исправленная версия программы с правильной группировкой RadioButton:

    // Программа с GUI для трех задач
    clear; clc; close;
    
    // Глобальные переменные
    global task_mode output_mode1 output_mode2;
    task_mode = 1; // 1-функция одной переменной, 2-функция двух переменных, 3-обратная матрица
    output_mode1 = 1; // 1-таблица, 2-график для задачи 1
    output_mode2 = 1; // 1-таблица, 2-график для задачи 2
    
    // Создание главного окна
    fig = figure('position', [50 50 900 700], ...
                'figure_name', 'Решение задач с графическим интерфейсом', ...
                'BackgroundColor', [0.9 0.9 0.9]);
    
    // Фрейм для выбора задачи
    frame_task = uicontrol(fig, 'style', 'frame', ...
                          'position', [20 550 300 130], ...
                          'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(fig, 'style', 'text', ...
             'position', [30 650 280 20], ...
             'string', 'Выберите задачу:', ...
             'horizontalalignment', 'left', ...
             'BackgroundColor', [0.85 0.85 0.85], ...
             'fontsize', 12, 'fontweight', 'bold');
    
    // RadioButton для выбора задачи - все в одном родителе для автоматической группировки
    radio_task1 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 620 260 20], ...
                           'string', 'Функция одной переменной', ...
                           'value', 1, ...
                           'callback', 'select_task(1)');
    
    radio_task2 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 590 260 20], ...
                           'string', 'Функция двух переменных', ...
                           'value', 0, ...
                           'callback', 'select_task(2)');
    
    radio_task3 = uicontrol(fig, 'style', 'radiobutton', ...
                           'position', [40 560 260 20], ...
                           'string', 'Обратная матрица', ...
                           'value', 0, ...
                           'callback', 'select_task(3)');
    
    // Панель параметров для задачи 1
    panel_task1 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры функции f(x)', ...
                         'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 290 280 40], ...
             'string', 'f(x) = ((x²+1)^(1/3)) / (0.5+√(|x|+0.5)) * x / (1+sin²(x))', ...
             'horizontalalignment', 'center', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 250 100 20], ...
             'string', 'Количество точек N:');
    edit1_N = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 250 60 20], ...
                        'string', '15');
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 220 100 20], ...
             'string', 'Начало отрезка a:');
    edit1_a = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 220 60 20], ...
                        'string', '-1.5708');
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [10 190 100 20], ...
             'string', 'Конец отрезка b:');
    edit1_b = uicontrol(panel_task1, 'style', 'edit', ...
                        'position', [120 190 60 20], ...
                        'string', '1.5708');
    
    // Фрейм для режима вывода задачи 1
    frame1_output = uicontrol(panel_task1, 'style', 'frame', ...
                             'position', [10 70 280 70], ...
                             'BackgroundColor', [0.8 0.8 0.8]);
    
    uicontrol(panel_task1, 'style', 'text', ...
             'position', [20 110 100 20], ...
             'string', 'Режим вывода:', ...
             'BackgroundColor', [0.8 0.8 0.8]);
    
    radio1_table = uicontrol(panel_task1, 'style', 'radiobutton', ...
                            'position', [130 110 100 20], ...
                            'string', 'Таблица', ...
                            'value', 1, ...
                            'BackgroundColor', [0.8 0.8 0.8], ...
                            'callback', 'select_output1(1)');
    
    radio1_graph = uicontrol(panel_task1, 'style', 'radiobutton', ...
                            'position', [130 80 100 20], ...
                            'string', 'График', ...
                            'value', 0, ...
                            'BackgroundColor', [0.8 0.8 0.8], ...
                            'callback', 'select_output1(2)');
    
    // Панель параметров для задачи 2
    panel_task2 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры функции f(x,y)', ...
                         'BackgroundColor', [0.85 0.85 0.85], ...
                         'visible', 'off');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 290 280 30], ...
             'string', 'f(x,y) = 5x² - 2y² + xy', ...
             'horizontalalignment', 'center', ...
             'fontsize', 12, ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 250 150 20], ...
             'string', 'Точек для графика N:');
    edit2_N = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 250 60 20], ...
                        'string', '50');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 220 150 20], ...
             'string', 'Точек для таблицы M:');
    edit2_M = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 220 60 20], ...
                        'string', '4');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 190 150 20], ...
             'string', 'Начало отрезка a:');
    edit2_a = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 190 60 20], ...
                        'string', '-6.2832');
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [10 160 150 20], ...
             'string', 'Конец отрезка b:');
    edit2_b = uicontrol(panel_task2, 'style', 'edit', ...
                        'position', [170 160 60 20], ...
                        'string', '6.2832');
    
    // Фрейм для режима вывода задачи 2
    frame2_output = uicontrol(panel_task2, 'style', 'frame', ...
                             'position', [10 70 280 70], ...
                             'BackgroundColor', [0.8 0.8 0.8]);
    
    uicontrol(panel_task2, 'style', 'text', ...
             'position', [20 110 100 20], ...
             'string', 'Режим вывода:', ...
             'BackgroundColor', [0.8 0.8 0.8]);
    
    radio2_table = uicontrol(panel_task2, 'style', 'radiobutton', ...
                            'position', [130 110 100 20], ...
                            'string', 'Таблица', ...
                            'value', 1, ...
                            'BackgroundColor', [0.8 0.8 0.8], ...
                            'callback', 'select_output2(1)');
    
    radio2_graph = uicontrol(panel_task2, 'style', 'radiobutton', ...
                            'position', [130 80 100 20], ...
                            'string', '3D График', ...
                            'value', 0, ...
                            'BackgroundColor', [0.8 0.8 0.8], ...
                            'callback', 'select_output2(2)');
    
    // Панель параметров для задачи 3
    panel_task3 = uipanel(fig, 'position', [20 200 300 340], ...
                         'Title', 'Параметры матрицы', ...
                         'BackgroundColor', [0.85 0.85 0.85], ...
                         'visible', 'off');
    
    uicontrol(panel_task3, 'style', 'text', ...
             'position', [10 290 280 20], ...
             'string', 'Введите элементы матрицы 4x4:', ...
             'horizontalalignment', 'center', ...
             'BackgroundColor', [0.85 0.85 0.85]);
    
    // Создание полей для ввода матрицы 4x4
    edit_matrix = [];
    for i = 1:4
        for j = 1:4
            edit_matrix(i,j) = uicontrol(panel_task3, 'style', 'edit', ...
                                         'position', [20 + (j-1)*65, 260 - (i-1)*30, 50, 25], ...
                                         'string', '0');
        end
    end
    
    // Заполнение матрицы значениями по умолчанию
    default_matrix = [1  2  4  6;
                     1 -3  7 -9;
                     21 17 13 11;
                     -6 -4 -2 -1];
                     
    for i = 1:4
        for j = 1:4
            set(edit_matrix(i,j), 'string', string(default_matrix(i,j)));
        end
    end
    
    btn_default = uicontrol(panel_task3, 'style', 'pushbutton', ...
                           'position', [60 100 180 30], ...
                           'string', 'Использовать матрицу по умолчанию', ...
                           'callback', 'set_default_matrix()');
    
    // Кнопка выполнения расчета
    btn_calc = uicontrol(fig, 'style', 'pushbutton', ...
                         'position', [75 150 190 40], ...
                         'string', 'Выполнить расчёт', ...
                         'fontsize', 12, ...
                         'callback', 'perform_calculation()');
    
    // Область для вывода результатов
    axes_result = newaxes();
    axes_result.margins = [0.1 0.1 0.1 0.1];
    axes_result.axes_bounds = [0.4 0.05 0.55 0.9];
    
    // Listbox для вывода таблицы
    list_table = uicontrol(fig, 'style', 'listbox', ...
                          'position', [350 50 530 600], ...
                          'fontname', 'monospace', ...
                          'fontsize', 10, ...
                          'visible', 'off');
    
    // Функция выбора задачи
    function select_task(task_num)
        global task_mode;
        task_mode = task_num;
        
        // Обновляем состояние RadioButton
        radio_task1.value = (task_num == 1);
        radio_task2.value = (task_num == 2);
        radio_task3.value = (task_num == 3);
        
        // Показываем/скрываем панели
        panel_task1.visible = (task_num == 1) ? 'on' : 'off';
        panel_task2.visible = (task_num == 2) ? 'on' : 'off';
        panel_task3.visible = (task_num == 3) ? 'on' : 'off';
        
        // Очистка области результатов
        sca(axes_result);
        clf();
        list_table.visible = 'off';
    endfunction
    
    // Функции выбора режима вывода
    function select_output1(mode)
        global output_mode1;
        output_mode1 = mode;
        radio1_table.value = (mode == 1);
        radio1_graph.value = (mode == 2);
    endfunction
    
    function select_output2(mode)
        global output_mode2;
        output_mode2 = mode;
        radio2_table.value = (mode == 1);
        radio2_graph.value = (mode == 2);
    endfunction
    
    // Функция установки матрицы по умолчанию
    function set_default_matrix()
        default_matrix = [1  2  4  6;
                         1 -3  7 -9;
                         21 17 13 11;
                         -6 -4 -2 -1];
        for i = 1:4
            for j = 1:4
                set(edit_matrix(i,j), 'string', string(default_matrix(i,j)));
            end
        end
    endfunction
    
    // Основная функция расчета
    function perform_calculation()
        global task_mode output_mode1 output_mode2;
        
        sca(axes_result);
        clf();
        list_table.visible = 'off';
        
        select task_mode
        case 1 // Функция одной переменной
            // Получение параметров
            N = evstr(edit1_N.string);
            a = evstr(edit1_a.string);
            b = evstr(edit1_b.string);
            
            // Вычисления
            x_values = linspace(a, b, N);
            y_values = ((x_values.^2 + 1).^(1/3)) ./ (0.5 + sqrt(abs(x_values) + 0.5)) .* x_values ./ (1 + sin(x_values).^2);
            
            if output_mode1 == 2 then // График
                axes_result.visible = 'on';
                plot(x_values, y_values, 'r-', 'LineWidth', 2);
                xlabel('x', 'fontsize', 3);
                ylabel('f(x)', 'fontsize', 3);
                title('График функции f(x)', 'fontsize', 3);
                xgrid();
                legend(['f(x)'], 2);
            else
                axes_result.visible = 'off';
            end
            
            if output_mode1 == 1 then // Таблица
                list_table.visible = 'on';
                table_data = [];
                table_data($+1) = "  Таблица значений функции f(x)";
                table_data($+1) = "  ================================";
                table_data($+1) = sprintf("  %12s    %12s", "x", "f(x)");
                table_data($+1) = "  --------------------------------";
                for i = 1:N
                    table_data($+1) = sprintf("  %12.6f    %12.6f", x_values(i), y_values(i));
                end
                list_table.string = table_data;
            end
            
        case 2 // Функция двух переменных
            // Получение параметров
            N = evstr(edit2_N.string);
            M = evstr(edit2_M.string);
            a = evstr(edit2_a.string);
            b = evstr(edit2_b.string);
            
            if output_mode2 == 2 then // 3D График
                axes_result.visible = 'on';
                // Построение 3D графика
                x_plot = linspace(a, b, N);
                y_plot = linspace(a, b, N);
                [X, Y] = ndgrid(x_plot, y_plot);
                Z = 5*X.^2 - 2*Y.^2 + X.*Y;
                
                plot3d(x_plot, y_plot, Z);
                xlabel("x", "fontsize", 3);
                ylabel("y", "fontsize", 3);
                zlabel("f(x,y)", "fontsize", 3);
                title("График функции f(x,y) = 5x² - 2y² + xy", "fontsize", 3);
                colorbar();
            else
                axes_result.visible = 'off';
            end
            
            if output_mode2 == 1 then // Таблица
                list_table.visible = 'on';
                // Вычисления для таблицы
                x_values = linspace(a, b, M);
                y_values = linspace(a, b, M);
                
                table_data = [];
                table_data($+1) = "  Таблица значений функции f(x,y) = 5x² - 2y² + xy";
                table_data($+1) = "  =================================================";
                table_data($+1) = sprintf("  %10s    %10s    %12s", "x", "y", "f(x,y)");
                table_data($+1) = "  -------------------------------------------------";
                for i = 1:M
                    x = x_values(i);
                    y = y_values(i);
                    f = 5*x^2 - 2*y^2 + x*y;
                    table_data($+1) = sprintf("  %10.4f    %10.4f    %12.4f", x, y, f);
                end
                list_table.string = table_data;
            end
            
        case 3 // Обратная матрица
            axes_result.visible = 'on';
            // Получение матрицы из полей ввода
            m = [];
            for i = 1:4
                for j = 1:4
                    m(i,j) = evstr(get(edit_matrix(i,j), 'string'));
                end
            end
            
            // Проверка определителя
            det_m = det(m);
            
            if abs(det_m) < 1e-10 then
                list_table.visible = 'on';
                list_table.string = ["ОШИБКА: Матрица вырожденная (определитель ≈ 0)."; ...
                                    "Обратная матрица не существует!"];
                return;
            end
            
            // Вычисление обратной матрицы
            m_inv = inv(m);
            
            // Проверка
            check = m * m_inv;
            
            // Визуализация матриц
            subplot(2,2,1);
            Matplot(m);
            xtitle("Исходная матрица");
            
            subplot(2,2,2);
            Matplot(m_inv);
            xtitle("Обратная матрица");
            
            subplot(2,2,3);
            Matplot(clean(check));
            xtitle("Проверка (M * M⁻¹)");
            
            // Текстовый вывод результатов
            subplot(2,2,4);
            plot2d([], [], rect=[0,0,1,1], axesflag=0);
            xstring(0.1, 0.8, sprintf("Определитель: %.6f", det_m));
            xstring(0.1, 0.6, "Максимальная ошибка");
            xstring(0.1, 0.5, "в единичной матрице:");
            xstring(0.1, 0.3, sprintf("%.2e", max(abs(check - eye(4,4)))));
        end
    endfunction
    

    Основные изменения:

    1. Явные функции управления RadioButton:

      • select_task() - управляет выбором задачи
      • select_output1() и select_output2() - управляют режимом вывода
    2. Правильная группировка:

      • Все RadioButton для выбора задачи имеют один родитель (fig)
      • RadioButton для режима вывода группируются внутри своих панелей
    3. Глобальные переменные:

      • Отдельные переменные для хранения режима вывода каждой задачи
      • Состояние сохраняется при переключении между задачами

    Теперь невозможно выбрать несколько задач одновременно, и RadioButton работают как правильные взаимоисключающие группы.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.