Skip to content
TheChatArchiveThe Chat Archive
Coherecommand-a-03-2025· CohereHugging Face LMArena Human Preference 140K

The CFM LEAP-1C uses outdated technology and is less efficient than the other LEAP…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-3-7-sonnet-20250219-thinking-32k’s answer.
  1. User

    The CFM LEAP-1C uses outdated technology and is less efficient than the other LEAP variants. Suggest alternative engines for the C919 that are not the LEAP-1A or PW1000G from Ivchenko-Progress, Saturn and Shenyang.

  2. Cohere Assistant

    You're correct in pointing out that the CFM LEAP-1C is a variant specifically designed for the COMAC C919, and while it shares the core LEAP technology, it has some differences from the LEAP-1A and LEAP-1B used on the Airbus A320neo and Boeing 737 MAX, respectively. The LEAP-1C is optimized for the C919's requirements but may not be as efficient as its counterparts due to factors like the C919's design and certification constraints.

    Given your request for alternative engines from Ivchenko-Progress, Saturn, and Shenyang (Chinese and Russian manufacturers), here are some potential options:


    1. Ivchenko-Progress D-436-148FM (Ukraine)

    • Current Use: Antonov An-148/An-158 regional jets
    • Thrust: ~78.4 kN (17,650 lbf) per engine
    • Efficiency: The D-436 is a high-bypass turbofan with decent fuel efficiency, though it is not as advanced as the LEAP or PW1000G.
    • Considerations: The D-436 would need significant upscaling and modernization to match the C919's requirements (around 25,000 lbf per engine). Ivchenko-Progress would need to develop a new variant, possibly with foreign collaboration, to meet modern efficiency and emissions standards.

    2. Saturn RD-33MK (Russia)

    • Current Use: MiG-29 fighter jet (military application)
    • Thrust: ~88 kN (19,800 lbf) with afterburner
    • Efficiency: The RD-33 is a low-bypass turbofan designed for military use, making it less efficient for commercial aviation.
    • Considerations: This engine is not suitable for the C919 due to its military design and lack of high-bypass ratio. However, Saturn could theoretically develop a civilian variant with a higher bypass ratio, but this would require extensive redesign and certification.

    3. Shenyang WS-20 (China)

    • Current Use: Under development for the Chinese military and potentially the CR929 wide-body aircraft
    • Thrust: Estimated ~30,000–40,000 lbf
    • Efficiency: The WS-20 is a high-thrust engine under development, aiming to compete with engines like the GE Passport. Its efficiency is not yet proven but is expected to be modern.
    • Considerations: If the WS-20 is successfully developed and certified, it could be a candidate for the C919, but it is currently not ready for commercial use. Scaling it down to the C919's thrust requirements would be necessary.

    4. Saturn PD-14 (Russia)

    • Current Use: Irkut MC-21 narrow-body aircraft
    • Thrust: ~14,000–18,000 lbf
    • Efficiency: The PD-14 is a modern, high-bypass turbofan designed to compete with the LEAP and PW1000G. It offers good fuel efficiency and reduced emissions.
    • Considerations: The PD-14 is slightly underpowered for the C919, which requires around 25,000 lbf per engine. However, Saturn could develop an upscaled variant (e.g., PD-14A) to meet the C919's needs. This would require additional development and certification.

    5. Shenyang/Liming AEP-808 (China)

    • Current Use: Under development for regional jets (e.g., ARJ21)
    • Thrust: ~8,000–10,000 lbf
    • Efficiency: The AEP-808 is a smaller engine designed for regional aircraft, with moderate efficiency.
    • Considerations: This engine is too small for the C919 and would need significant upscaling. However, it could serve as a starting point for a new engine program if Shenyang decides to enter the narrow-body market.

    Realistic Alternative: Saturn PD-14 with Upscaling

    The most realistic alternative from the suggested manufacturers is the Saturn PD-14, provided it is upscaled to meet the C919's thrust requirements. This would involve:

    • Increasing the core size and fan diameter.
    • Enhancing the materials and aerodynamics for higher efficiency.
    • Ensuring compliance with international certification standards (e.g., EASA or FAA).

    However, this would still be a significant undertaking, and the LEAP-1C remains the most practical choice for the C919 in the near term.


    Conclusion

    While Ivchenko-Progress, Saturn, and Shenyang have engines or programs that could theoretically be adapted for the C919, none are currently ready as direct replacements for the LEAP-1C. The Saturn PD-14, if upscaled, is the most promising candidate, but it would require substantial development and certification efforts. For now, the LEAP-1C remains the most viable option for the C919.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.