Skip to content
TheChatArchiveThe Chat Archive
grok-3-mini-beta· xAIHugging Face LMArena Human Preference 140K

C:\Scripts\UserLogonAudit_B.ps1 === Diagnostyka skryptu logowania === BŁĄD: Zmienna…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with o3-mini’s answer.
  1. User

    C:\Scripts\UserLogonAudit_B.ps1 === Diagnostyka skryptu logowania === BŁĄD: Zmienna $logFile nie jest zdefiniowana!

  2. Assistant

    Wygląda na to, że w Twoim skrypcie brakuje definicji zmiennej $logFile, co powoduje błąd na samym początku. W oryginalnym kodzie, który podałeś na początku, zmienna ta jest zdefiniowana w sekcji "Konfiguracja i Inicjalizacja Zmiennych Globalnych". Prawdopodobnie w pliku C:\Scripts\UserLogonAudit_B.ps1 ta część nie została uwzględniona lub jest problem z zakresem zmiennych.

    Analiza błędu:

    • Błąd: "BŁĄD: Zmienna $logFile nie jest zdefiniowana!" wynika z linii, którą dodałem w poprawionej wersji:
      if (-not $logFile) { 
          Write-Host "BŁĄD: Zmienna `$logFile nie jest zdefiniowana!" -ForegroundColor Red
          exit 1 
      }
      
    • To jest celowe sprawdzenie, aby zapobiec dalszemu wykonywaniu skryptu, jeśli zmienna nie istnieje. Jeśli $logFile nie jest zdefiniowana na górze skryptu, skrypt się zatrzyma.

    Rozwiązanie:

    1. Dodaj definicję zmiennych globalnych na początku skryptu. Upewnij się, że sekcja z początkowego kodu jest włączona. Powinna wyglądać tak:

      $logFile = "C:\Logs\LoginMonitor.log"
      $throttleFile = "C:\Logs\LoginThrottleData.json"
      $allowedLogonTypes = @(2, 10, 11)
      
    2. Oto pełna, poprawiona wersja skryptu: Poniżej podaję kompletny skrypt, łączący oryginalną konfigurację z poprawkami, które wcześniej zaproponowałem. Upewnij się, że cały kod jest w jednym pliku (C:\Scripts\UserLogonAudit_B.ps1).

      #region --- Konfiguracja i Inicjalizacja Zmiennych Globalnych ---
      $logFile = "C:\Logs\LoginMonitor.log"
      $throttleFile = "C:\Logs\LoginThrottleData.json"
      $allowedLogonTypes = @(2, 10, 11)
      
      # Inicjalizacja zmiennej do przechowywania danych throttlingu
      $data = @{}
      if (Test-Path $throttleFile) {
          try {
              $fileContent = Get-Content $throttleFile -Raw -Encoding UTF8 -ErrorAction Stop
              if ($fileContent -and $fileContent -ne "") {
                  $data = $fileContent | ConvertFrom-Json -ErrorAction Stop
                  Write-Host "✓ Wczytano dane throttlingu z: $throttleFile" -ForegroundColor Cyan
              } else {
                  $data = @{}
                  Write-Host "Plik throttlingu jest pusty. Inicjalizuję pusty słownik." -ForegroundColor Yellow
              }
          } catch {
              Write-Host "BŁĄD: Nie można wczytać pliku throttlingu ($throttleFile). Inicjalizuję pusty." -ForegroundColor Red
              Write-Host "Szczegóły błędu: $($_.Exception.Message)" -ForegroundColor Red
              $data = @{}
          }
      } else {
          Write-Host "Plik throttlingu ($throttleFile) nie istnieje. Inicjalizuję pusty." -ForegroundColor Cyan
      }
      #endregion
      
      #region --- Definicje Funkcji ---
      function GetLogonTypeName {
          param ([int]$LogonType)
          switch ($LogonType) {
              2 { "Interactive" }
              3 { "Network" }
              4 { "Batch" }
              5 { "Service" }
              7 { "Unlock" }
              8 { "NetworkCleartext" }
              9 { "NewCredentials" }
              10 { "RemoteInteractive" }
              11 { "CachedInteractive" }
              default { "Unknown ($LogonType)" }
          }
      }
      
      function CanProcess {
          param (
              [string]$key,
              [int]$throttleIntervalMinutes = 5
          )
      
          $currentTime = (Get-Date).ToFileTimeUtc()
      
          if (-not $script:data.ContainsKey($key)) {
              $script:data[$key] = $currentTime
              return $true
          }
      
          $lastProcessTime = $script:data[$key]
          $timeDifference = ([datetime]::FromFileTimeUtc($currentTime) - [datetime]::FromFileTimeUtc($lastProcessTime)).TotalMinutes
      
          if ($timeDifference -ge $throttleIntervalMinutes) {
              $script:data[$key] = $currentTime
              return $true
          } else {
              return $false
          }
      }
      #endregion
      
      # Dodaj na początku skryptu
      Write-Host "=== Diagnostyka skryptu logowania ===" -ForegroundColor Green
      
      # Sprawdź czy zmienne globalne są zdefiniowane
      if (-not $logFile) { 
          Write-Host "BŁĄD: Zmienna `$logFile nie jest zdefiniowana!" -ForegroundColor Red
          exit 1 
      }
      if (-not $allowedLogonTypes) { 
          Write-Host "BŁĄD: Zmienna `$allowedLogonTypes nie jest zdefiniowana!" -ForegroundColor Red
          exit 1 
      }
      
      # 1. Sprawdź czy katalog istnieje
      $logDir = Split-Path $logFile -Parent
      if (-not (Test-Path $logDir)) {
          Write-Host "BŁĄD: Katalog $logDir nie istnieje!" -ForegroundColor Red
          try {
              New-Item -Path $logDir -ItemType Directory -Force | Out-Null
              Write-Host "Utworzono katalog: $logDir" -ForegroundColor Yellow
          } catch {
              Write-Host "BŁĄD: Nie można utworzyć katalogu: $($_.Exception.Message)" -ForegroundColor Red
              exit 1
          }
      }
      
      # 2. Test uprawnień do zapisu
      try {
          "Test" | Out-File -FilePath $logFile -Append -Encoding UTF8
          Write-Host "✓ Uprawnienia do zapisu: OK" -ForegroundColor Green
      } catch {
          Write-Host "BŁĄD: Brak uprawnień do zapisu w $logFile" -ForegroundColor Red
          Write-Host "Błąd: $($_.Exception.Message)" -ForegroundColor Red
          exit 1
      }
      
      # 3. Sprawdź zdarzenia PRZED filtrowaniem
      try {
          $allEvents = Get-WinEvent -FilterHashtable @{
              LogName = 'Security'
              ID = 4624
              StartTime = (Get-Date).AddMinutes(-5)
          } -ErrorAction Stop
          Write-Host "✓ Znaleziono $($allEvents.Count) zdarzeń logowania z ostatnich 5 minut" -ForegroundColor Green
      } catch {
          Write-Host "BŁĄD: Nie można pobrać zdarzeń: $($_.Exception.Message)" -ForegroundColor Red
          exit 1
      }
      
      # 4. Inicjalizacja liczników i zmiennych
      $processedCount = 0
      $skippedReasons = @{
          'SamePID' = 0
          'WrongType' = 0
          'SystemUser' = 0
          'Throttled' = 0
      }
      
      # Pobierz zdarzenia z wykluczeniem tych generowanych przez ten skrypt
      $currentPID = $PID
      Write-Host "Bieżący PID procesu: $currentPID" -ForegroundColor Cyan
      
      try {
          $logonEvents = Get-WinEvent -FilterHashtable @{
              LogName = 'Security'
              ID = 4624
              StartTime = (Get-Date).AddMinutes(-5)
          } -ErrorAction Stop | Where-Object {
              $xml = [xml]$_.ToXml()
              $processId = $xml.Event.System.Execution.ProcessID
              if ($processId -eq $currentPID) {
                  $skippedReasons['SamePID']++
                  return $false
              }
              return $true
          }
          
          Write-Host "Po filtrowaniu PID: $($logonEvents.Count) zdarzeń" -ForegroundColor Cyan
      } catch {
          Write-Host "BŁĄD: Problem z pobieraniem/filtrowaniem zdarzeń: $($_.Exception.Message)" -ForegroundColor Red
          exit 1
      }
      
      foreach ($event in $logonEvents) {
          try {
              $user = $event.Properties[5].Value
              $domain = $event.Properties[6].Value
              $type = [int]$event.Properties[8].Value
              $workstation = $event.Properties[11].Value
              $ipAddress = $event.Properties[18].Value
      
              Write-Host "Przetwarzam: $domain\$user, typ: $type" -ForegroundColor Gray
      
              if ($type -notin $allowedLogonTypes) { 
                  $skippedReasons['WrongType']++
                  continue 
              }
              
              if (-not $user -or $user -eq "-" -or $user -match "^(SYSTEM|UMFD|LOCAL SERVICE|NETWORK SERVICE|\$$)") { 
                  $skippedReasons['SystemUser']++
                  continue 
              }
      
              $timestamp = $event.TimeCreated.ToString("yyyy-MM-dd HH:mm:ss")
              $desc = GetLogonTypeName $type
              
              if (-not (CanProcess "$user-$type")) { 
                  $skippedReasons['Throttled']++
                  Write-Host "  → Pominięto (throttling): $user-$type" -ForegroundColor Yellow
                  continue 
              }
      
              # Zapisz do pliku
              $logLine = "$timestamp | User: $domain\$user | Type: $desc | Workstation: $workstation | IP: $ipAddress"
              Write-Host "  → ZAPISUJĘ: $logLine" -ForegroundColor Green
              Add-Content -Path $logFile -Value $logLine -Encoding UTF8
              $processedCount++
              
          } catch {
              Write-Host "BŁĄD: Problem z przetwarzaniem zdarzenia: $($_.Exception.Message)" -ForegroundColor Red
              continue
          }
      }
      
      # Podsumowanie
      Write-Host "`n=== PODSUMOWANIE ===" -ForegroundColor Green
      Write-Host "Zapisano do logu: $processedCount wpisów" -ForegroundColor Green
      Write-Host "Powody pominięcia:" -ForegroundColor Yellow
      $skippedReasons.GetEnumerator() | ForEach-Object { 
          Write-Host "  $($_.Key): $($_.Value)" -ForegroundColor Yellow 
      }
      
      # Zapis throttlingu
      try {
          $script:data | ConvertTo-Json | Set-Content $throttleFile -Force -Encoding UTF8
          Write-Host "✓ Zapisano dane throttlingu do: $throttleFile" -ForegroundColor Cyan
      } catch {
          Write-Host "BŁĄD: Nie można zapisać pliku throttlingu: $($_.Exception.Message)" -ForegroundColor Red
      }
      

    Jak to naprawić:

    • Kopiuj i wklej cały kod: Zapisz go do pliku C:\Scripts\UserLogonAudit_B.ps1.
    • Uruchom skrypt ponownie: Otwórz PowerShell jako administrator i wykonaj: C:\Scripts\UserLogonAudit_B.ps1.
    • Sprawdź środowisko: Upewnij się, że skrypt jest uruchamiany w kontekście, gdzie zmienne globalne są dostępne (np. nie w funkcji, tylko w głównym bloku skryptu).

    Jeśli błąd nadal występuje, podaj więcej szczegółów, np. pełny output błędu lub jak uruchamiasz skrypt. Możemy to dalej debugować! 😊

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.

Identical first prompt