Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-pro-preview-05-06· GoogleHugging Face LMArena Human Preference 140K

I want to change a column in a table in duckDB to a different type with different…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with DeepSeekdeepseek-r1-0528’s answer.
  1. User

    I want to change a column in a table in duckDB to a different type with different entries. Should I remove the old column and create a new one or is there a nicer method?

  2. Gemini Assistant

    You're looking for the most idiomatic and safest way to do this. DuckDB, like PostgreSQL, offers a very nice way to do this using the ALTER TABLE ... ALTER COLUMN ... TYPE ... USING clause. This allows you to change the type and specify an expression to transform the existing data to the new type in a single, atomic operation.

    This is generally preferable to dropping and re-adding the column because:

    1. Atomicity: The operation either fully succeeds or fails, leaving your table in a consistent state.
    2. Simplicity: It's a single command.
    3. Data Integrity: The transformation is part of the type change.
    4. No need for temporary columns: You don't have to manage intermediate states manually.

    Here's the recommended method:

    Method 1: ALTER TABLE ... ALTER COLUMN ... TYPE ... USING ... (Recommended)

    This is the "nicer method." You specify the new type and an expression (USING) that tells DuckDB how to convert the old values to the new values.

    -- Let's assume your table and old column look like this:
    CREATE TABLE my_table (
        id INTEGER PRIMARY KEY,
        old_column VARCHAR, -- e.g., stores 'TRUE', 'FALSE', '10', '20'
        other_data VARCHAR
    );
    
    INSERT INTO my_table VALUES
        (1, 'TRUE', 'data1'),
        (2, 'FALSE', 'data2'),
        (3, '10', 'data3'),
        (4, '20', 'data4');
    
    -- Now, you want to change 'old_column' to an INTEGER,
    -- where 'TRUE' becomes 1, 'FALSE' becomes 0, and numeric strings are cast.
    ALTER TABLE my_table
    ALTER COLUMN old_column TYPE INTEGER
    USING (
        CASE
            WHEN old_column = 'TRUE' THEN 1
            WHEN old_column = 'FALSE' THEN 0
            ELSE CAST(old_column AS INTEGER) -- Or any other transformation
        END
    );
    
    -- Or if you wanted to change it to BOOLEAN:
    -- ALTER TABLE my_table
    -- ALTER COLUMN old_column TYPE BOOLEAN
    -- USING (
    --     CASE
    --         WHEN old_column = 'TRUE' THEN TRUE
    --         WHEN old_column = 'FALSE' THEN FALSE
    --         ELSE NULL -- Or handle other cases, e.g., CAST(old_column AS BOOLEAN) if possible
    --     END
    -- );
    
    SELECT * FROM my_table;
    -- Output will show 'old_column' as INTEGER with transformed values.
    /*
    ┌───────┬────────────┬────────────┐
    │  id   │ old_column │ other_data │
    │ int32 │   int32    │  varchar   │
    ├───────┼────────────┼────────────┤
    │     1 │          1 │ data1      │
    │     2 │          0 │ data2      │
    │     3 │         10 │ data3      │
    │     4 │         20 │ data4      │
    └───────┴────────────┴────────────┘
    */
    

    When ALTER ... USING is ideal:

    • When the transformation logic can be expressed in a SQL expression.
    • For most common type changes and data value transformations.

    Alternative Methods (Less "Nice" but sometimes necessary):

    If the transformation is extremely complex and cannot be easily expressed in a USING clause, or if you want more explicit control, you might consider these, but the USING clause is powerful.

    Method 2: Add New, Populate, Drop Old, Rename New

    This is a more manual but very explicit approach.

    -- 0. (Optional but good practice) Start a transaction
    BEGIN TRANSACTION;
    
    -- 1. Add the new column with the desired type
    ALTER TABLE my_table ADD COLUMN new_column_temp INTEGER; -- Or your target type
    
    -- 2. Populate the new column based on the old one
    UPDATE my_table
    SET new_column_temp = (
        CASE
            WHEN old_column = 'TRUE' THEN 1
            WHEN old_column = 'FALSE' THEN 0
            ELSE CAST(old_column AS INTEGER)
        END
    );
    
    -- 3. (Optional) Verify the data in the new column
    -- SELECT old_column, new_column_temp FROM my_table;
    
    -- 4. Drop the old column
    ALTER TABLE my_table DROP COLUMN old_column;
    
    -- 5. Rename the new column to the original name
    ALTER TABLE my_table RENAME COLUMN new_column_temp TO old_column; -- Or your desired final name
    
    -- 6. (If you started a transaction) Commit
    COMMIT;
    

    Method 3: Create Table As Select (CTAS), Drop Old, Rename New

    This is useful if you're making substantial changes to multiple columns or the table structure itself.

    -- 0. (Optional but good practice) Start a transaction
    BEGIN TRANSACTION;
    
    -- 1. Create a new table with the desired schema and transformed data
    CREATE TABLE my_table_new AS
    SELECT
        id,
        (CASE
            WHEN old_column = 'TRUE' THEN 1
            WHEN old_column = 'FALSE' THEN 0
            ELSE CAST(old_column AS INTEGER)
        END) AS old_column, -- Name it as the final column name
        other_data
    FROM my_table;
    
    -- 2. Drop the old table
    DROP TABLE my_table;
    
    -- 3. Rename the new table to the original table name
    ALTER TABLE my_table_new RENAME TO my_table;
    
    -- 4. (If you started a transaction) Commit
    COMMIT;
    -- Note: This method will lose original constraints, indexes etc.
    -- You'd need to recreate them on my_table_new before dropping the old one.
    

    Why your initial thought (Remove old, Create new) is generally not ideal:

    1. Data Loss: If you remove the column first, the data is gone. You'd need to select it into a temporary structure before dropping, then re-insert/update.
    2. Multiple Steps: More prone to error if a step fails.
    3. Not Atomic: The table is in an inconsistent state between dropping and re-adding/populating.

    Conclusion:

    For changing a column's type and its entries in DuckDB, the ALTER TABLE ... ALTER COLUMN ... TYPE ... USING ... command is almost always the nicest, safest, and most efficient method. Use it whenever your data transformation can be expressed as a SQL expression.

  3. User

    The old data type was a composite attribute (so VARCHAR) and now should be a UUID as a foreign key

  4. Gemini Assistant

    Okay, this is a common and more involved scenario! You're essentially refactoring your data model. The ALTER TABLE ... ALTER COLUMN ... TYPE ... USING is still your friend, but the USING clause will be more complex, involving a lookup to the other table.

    Let's break this down. I'll assume:

    1. my_table: The table you want to change. It has a column, let's call it composite_fk_varchar (VARCHAR), which currently stores a string representation of a composite key.
    2. other_table: The table that originally had the composite primary key. You will need to add a UUID primary key to this table first. Let's say its original composite key columns were key_part1 and key_part2.

    Here's the process:

    Phase 1: Modify other_table to have a UUID Primary Key

    You need to add a UUID column to other_table, populate it, and make it the new primary key.

    -- Let's assume other_table looks something like this:
    CREATE TABLE other_table (
        key_part1 VARCHAR,
        key_part2 INTEGER,
        some_data VARCHAR,
        PRIMARY KEY (key_part1, key_part2) -- Original composite PK
    );
    
    INSERT INTO other_table (key_part1, key_part2, some_data) VALUES
    ('A', 1, 'Data for A1'),
    ('B', 2, 'Data for B2'),
    ('C', 3, 'Data for C3');
    
    -- 1. Add a new UUID column to other_table
    ALTER TABLE other_table ADD COLUMN id_uuid UUID;
    
    -- 2. Populate the new UUID column with unique UUIDs
    -- DuckDB can generate UUIDs on the fly.
    -- If you want them to be deterministic for reproducibility for specific key_part combos
    -- you might need a more complex generation scheme, but for unique PKs uuid() is fine.
    UPDATE other_table SET id_uuid = uuid();
    
    -- 3. Make the new UUID column NOT NULL (Primary Keys must be NOT NULL)
    -- This step might require ensuring all rows got a UUID in step 2.
    -- If id_uuid was populated for all rows, this won't fail.
    ALTER TABLE other_table ALTER COLUMN id_uuid SET NOT NULL;
    
    -- 4. Drop the old primary key constraint
    ALTER TABLE other_table DROP CONSTRAINT "other_table_pkey"; -- Name might vary, check with .schema other_table
    
    -- 5. Add the new primary key constraint on the UUID column
    ALTER TABLE other_table ADD PRIMARY KEY (id_uuid);
    
    -- 6. (Optional but recommended) Add a UNIQUE constraint on the old composite key columns
    -- if you still need to ensure their combination is unique.
    ALTER TABLE other_table ADD CONSTRAINT uq_other_table_composite UNIQUE (key_part1, key_part2);
    
    SELECT * FROM other_table;
    /*
    ┌───────────┬───────────┬─────────────┬──────────────────────────────────────┐
    │ key_part1 │ key_part2 │  some_data  │               id_uuid                │
    │  varchar  │   int32   │   varchar   │                 uuid                 │
    ├───────────┼───────────┼─────────────┼──────────────────────────────────────┤
    │ A         │         1 │ Data for A1 │ 8c1c4e0f-7a74-4a32-97e5-e6a4a8f0b5d9 │
    │ B         │         2 │ Data for B2 │ 045875d7-1190-490e-9057-2f036cf4f5f6 │
    │ C         │         3 │ Data for C3 │ d9b0f7e3-9c17-48bc-9c29-78a802c30d1f │
    └───────────┴───────────┴─────────────┴──────────────────────────────────────┘
    */
    

    Phase 2: Modify my_table to use the new UUID Foreign Key

    Now, my_table has the composite_fk_varchar column. You need to:

    • Determine how to parse composite_fk_varchar to get the original key_part1 and key_part2 values.
    • Use these parsed values to look up the corresponding id_uuid in other_table.
    -- Let's assume my_table looks something like this:
    CREATE TABLE my_table (
        my_id INTEGER PRIMARY KEY,
        composite_fk_varchar VARCHAR, -- e.g., stores "A:1", "B:2"
        extra_info VARCHAR
    );
    
    -- Assume the composite_fk_varchar stores key_part1 and key_part2 separated by a colon ':'
    INSERT INTO my_table (my_id, composite_fk_varchar, extra_info) VALUES
    (101, 'A:1', 'Info for A1 link'),
    (102, 'B:2', 'Info for B2 link'),
    (103, 'A:1', 'More info for A1 link'),
    (104, 'C:3', 'Info for C3 link'),
    (105, NULL, 'No link here'); -- Handle potential NULLs
    
    -- Now, change composite_fk_varchar to UUID and populate it
    -- The USING clause will do the heavy lifting.
    -- You MUST adjust the parsing logic (split_part) to match how your composite_fk_varchar is formatted.
    ALTER TABLE my_table
    ALTER COLUMN composite_fk_varchar TYPE UUID
    USING (
        SELECT ot.id_uuid
        FROM other_table ot
        WHERE
            -- This parsing logic is an EXAMPLE. Adjust it to your actual string format.
            -- Assuming composite_fk_varchar is 'key_part1_value:key_part2_value'
            -- And key_part1 is VARCHAR, key_part2 is INTEGER in other_table
            ot.key_part1 = split_part(composite_fk_varchar, ':', 1)
            AND ot.key_part2 = CAST(split_part(composite_fk_varchar, ':', 2) AS INTEGER)
            -- If composite_fk_varchar could be NULL, the subquery will return NULL,
            -- which is usually the correct behavior for a nullable FK.
    );
    
    -- (Optional) Rename the column to something more appropriate
    ALTER TABLE my_table RENAME COLUMN composite_fk_varchar TO other_table_id;
    
    -- Add the foreign key constraint
    ALTER TABLE my_table
    ADD CONSTRAINT fk_my_table_other_table
    FOREIGN KEY (other_table_id) REFERENCES other_table(id_uuid);
    
    SELECT * FROM my_table;
    /*
    ┌─────────┬──────────────────────────────────────┬───────────────────────┐
    │ my_id   │            other_table_id            │      extra_info       │
    │ int32   │                 uuid                 │        varchar        │
    ├─────────┼──────────────────────────────────────┼───────────────────────┤
    │     101 │ 8c1c4e0f-7a74-4a32-97e5-e6a4a8f0b5d9 │ Info for A1 link      │
    │     102 │ 045875d7-1190-490e-9057-2f036cf4f5f6 │ Info for B2 link      │
    │     103 │ 8c1c4e0f-7a74-4a32-97e5-e6a4a8f0b5d9 │ More info for A1 link │
    │     104 │ d9b0f7e3-9c17-48bc-9c29-78a802c30d1f │ Info for C3 link      │
    │     105 │ NULL                                 │ No link here          │
    └─────────┴──────────────────────────────────────┴───────────────────────┘
    */
    

    Important Considerations for USING clause parsing:

    1. String Format: The split_part(composite_fk_varchar, ':', 1) and CAST(split_part(composite_fk_varchar, ':', 2) AS INTEGER) are crucial. You must adapt this to:
      • The delimiter you used (e.g., '-', '|', etc.).
      • The number of parts in your composite key.
      • The data types of those parts (you might need more CAST operations).
    2. Data Cleansing: If composite_fk_varchar can have malformed data (e.g., missing delimiter, wrong number of parts, parts that cannot be cast to the target type), the ALTER TABLE command might fail. It's best to clean this data before running the ALTER TABLE command. You can find problematic rows with queries like:
      -- Example: Find rows where the second part is not a valid integer
      SELECT *
      FROM my_table
      WHERE composite_fk_varchar IS NOT NULL AND TRY_CAST(split_part(composite_fk_varchar, ':', 2) AS INTEGER) IS NULL;
      
    3. NULLs: If composite_fk_varchar can be NULL, the subquery in the USING clause will effectively evaluate to NULL for those rows, and the new UUID column will also be NULL. This is typically the desired behavior for nullable foreign keys.
    4. No Match: If a parsed composite key from my_table.composite_fk_varchar does not have a corresponding entry in other_table (after other_table has its UUIDs), the subquery in USING will return NULL. This will result in a NULL in the new UUID foreign key column. This could be an indication of orphaned records that you might want to investigate or handle (e.g., by setting to a default, or cleaning up).
    5. Transaction: For safety, wrap these operations (especially Phase 2, or both phases if done together) in a BEGIN TRANSACTION; ... COMMIT; (or ROLLBACK; if something goes wrong).

    This approach is robust and leverages DuckDB's capabilities effectively. It's much cleaner and safer than manually adding/dropping columns and populating them in separate steps for my_table.

  5. User

    My composite data cannot be automatically parsed. I want to do every entry manually

  6. Gemini Assistant

    Okay, if automatic parsing within a USING clause is not feasible due to the complexity or inconsistency of your composite_fk_varchar data, you'll need a more hands-on approach. The goal is still to end up with a UUID foreign key.

    The most controlled "manual" way involves creating a temporary mapping table where you explicitly define the relationship between each old composite_fk_varchar value and its corresponding new UUID from other_table.

    Pre-requisite: other_table must already have its id_uuid column populated and set as its primary key (as outlined in Phase 1 of my previous answer).

    Here's the strategy:

    Phase 1: Prepare other_table (Ensure it has UUID PK) (This is the same as before, ensure this is done first)

    -- Assuming other_table has original composite keys key_part1, key_part2
    -- and you've added id_uuid as the new UUID primary key.
    -- Example:
    -- CREATE TABLE other_table (
    --     key_part1 VARCHAR,
    --     key_part2 INTEGER,
    --     some_data VARCHAR,
    --     id_uuid UUID PRIMARY KEY -- This needs to exist and be populated
    -- );
    -- Ensure other_table.id_uuid is populated for all relevant records.
    

    Phase 2: Manually Map and Transform my_table

    This approach uses a temporary table to store your manual mappings.

    -- Let's assume my_table looks like this:
    -- CREATE TABLE my_table (
    --     my_id INTEGER PRIMARY KEY,
    --     composite_fk_varchar VARCHAR, -- e.g., "complex_val_1", "another_format_2"
    --     extra_info VARCHAR
    -- );
    -- INSERT INTO my_table (my_id, composite_fk_varchar, extra_info) VALUES
    -- (101, 'complex_val_1_representing_A_1', 'Info 1'),
    -- (102, 'value_for_B_2', 'Info 2'),
    -- (103, 'complex_val_1_representing_A_1', 'Info 3'), -- Duplicate complex value
    -- (104, 'completely_different_C_3', 'Info 4');
    
    BEGIN TRANSACTION;
    
    -- Step 1: Create a Temporary Mapping Table
    -- This table will store your manual translations.
    CREATE TEMP TABLE manual_fk_mapping (
        old_varchar_value VARCHAR PRIMARY KEY, -- The unique values from my_table.composite_fk_varchar
        target_uuid UUID NOT NULL              -- The corresponding UUID from other_table.id_uuid
    );
    
    -- Step 2: Populate the Manual Mapping Table (THE MANUAL PART)
    -- For each DISTINCT value in my_table.composite_fk_varchar,
    -- you need to find the corresponding id_uuid in other_table and insert it here.
    -- This is where your manual effort comes in.
    --
    -- Example:
    -- Let's say 'complex_val_1_representing_A_1' in my_table should map to an entry in other_table
    -- where other_table.key_part1 = 'A' AND other_table.key_part2 = 1.
    -- First, find that UUID in other_table:
    -- SELECT id_uuid FROM other_table WHERE key_part1 = 'A' AND key_part2 = 1;
    -- Let's assume this returns 'uuid-for-A1'
    
    INSERT INTO manual_fk_mapping (old_varchar_value, target_uuid) VALUES
        ('complex_val_1_representing_A_1', (SELECT id_uuid FROM other_table WHERE key_part1 = 'A' AND key_part2 = 1)),
        ('value_for_B_2',                  (SELECT id_uuid FROM other_table WHERE key_part1 = 'B' AND key_part2 = 2)),
        ('completely_different_C_3',       (SELECT id_uuid FROM other_table WHERE key_part1 = 'C' AND key_part2 = 3))
        -- Add more entries for every distinct composite_fk_varchar value in my_table.
        -- If a value in my_table.composite_fk_varchar should not map to anything (i.e., result in NULL),
        -- you don't need an entry for it in manual_fk_mapping, or you could explicitly map it to NULL
        -- if the target_uuid column in manual_fk_mapping was nullable.
    ;
    
    -- You can verify your mapping table:
    -- SELECT * FROM manual_fk_mapping;
    
    -- Step 3: Alter my_table to use the UUID type, using the mapping table
    ALTER TABLE my_table
    ALTER COLUMN composite_fk_varchar TYPE UUID
    USING (
        -- Look up the new UUID from our manual mapping table
        -- If a composite_fk_varchar is NULL, it will remain NULL.
        -- If a composite_fk_varchar is NOT NULL but not found in manual_fk_mapping,
        -- the result of the subquery will be NULL.
        SELECT mfm.target_uuid
        FROM manual_fk_mapping mfm
        WHERE mfm.old_varchar_value = my_table.composite_fk_varchar
    );
    
    -- Step 4: (Optional) Rename the column
    ALTER TABLE my_table RENAME COLUMN composite_fk_varchar TO other_table_id_fk;
    
    -- Step 5: Add the Foreign Key Constraint
    -- This will fail if any non-NULL other_table_id_fk values don't exist in other_table.id_uuid
    -- (which shouldn't happen if your manual_fk_mapping was correct).
    ALTER TABLE my_table
    ADD CONSTRAINT fk_my_table_to_other_table
    FOREIGN KEY (other_table_id_fk) REFERENCES other_table(id_uuid);
    
    -- Step 6: Clean up the temporary mapping table
    DROP TABLE manual_fk_mapping;
    
    COMMIT;
    
    -- Verify results
    SELECT * FROM my_table;
    

    How to perform the "MANUAL PART" (Populating manual_fk_mapping):

    1. Identify Distinct Values:
      SELECT DISTINCT composite_fk_varchar FROM my_table WHERE composite_fk_varchar IS NOT NULL;
      
    2. For each distinct value:
      • You, the human, need to determine which record in other_table it corresponds to based on your knowledge of the data.
      • Query other_table to find its id_uuid. For example, if "complex_val_1_representing_A_1" means key_part1 = 'A' and key_part2 = 1 in other_table:
        SELECT id_uuid FROM other_table WHERE key_part1 = 'A' AND key_part2 = 1;
        
      • Use this id_uuid in your INSERT statement for manual_fk_mapping.
    3. Tools for Manual Mapping:
      • You could export the distinct composite_fk_varchar values to a CSV.
      • In a spreadsheet, add a column for the target_uuid.
      • Manually look up/determine each target_uuid and fill it in.
      • Then, import this CSV back into the manual_fk_mapping table or generate INSERT statements from it.

    Alternative if "Manual" means truly one-by-one UPDATEs (More granular, less atomic):

    If creating the manual_fk_mapping table upfront is too difficult, you could:

    1. Add a new nullable UUID column:
      ALTER TABLE my_table ADD COLUMN other_table_id_fk UUID NULL;
      
    2. Iteratively update this new column. For each composite_fk_varchar value (or group of identical values):
      -- For "complex_val_1_representing_A_1"
      UPDATE my_table
      SET other_table_id_fk = (SELECT id_uuid FROM other_table WHERE key_part1 = 'A' AND key_part2 = 1)
      WHERE composite_fk_varchar = 'complex_val_1_representing_A_1';
      
      -- For "value_for_B_2"
      UPDATE my_table
      SET other_table_id_fk = (SELECT id_uuid FROM other_table WHERE key_part1 = 'B' AND key_part2 = 2)
      WHERE composite_fk_varchar = 'value_for_B_2';
      -- ... and so on for all your values
      
    3. Once all values are populated:
      ALTER TABLE my_table DROP COLUMN composite_fk_varchar;
      
    4. (Optional but good) If the FK should not be null, and you've ensured all are populated:
      ALTER TABLE my_table ALTER COLUMN other_table_id_fk SET NOT NULL;
      
    5. Add the foreign key constraint:
      ALTER TABLE my_table ADD CONSTRAINT fk_my_table_to_other_table
      FOREIGN KEY (other_table_id_fk) REFERENCES other_table(id_uuid);
      

    This iterative UPDATE approach gives you maximum manual control for each case but is less atomic and the table is in an intermediate state for longer. The manual_fk_mapping table method is generally preferred if you can build that mapping, even if it takes significant manual effort to define the map itself.

    Choose the method that best suits the scale and complexity of your manual mapping task. The temporary mapping table approach with ALTER TABLE ... USING is generally cleaner.

  7. User

    Let's say both tables I'm trying to map have the same order. Is there an easy way to do it now?

  8. Gemini Assistant

    If "same order" means that the Nth row in my_table (when ordered by some implicit or explicit criteria) should map to the Nth row in other_table (when ordered by some corresponding implicit or explicit criteria), then yes, this can simplify things significantly.

    CRUCIAL CAVEAT: SQL tables are inherently unordered sets of rows. Relying on an "implicit" order (like insertion order) is dangerous and not guaranteed to be stable across database operations, restarts, or different versions. You should always have an explicit column or set of columns that defines this order if you intend to rely on it.

    Assuming you have such explicit ordering columns:

    Scenario: You have explicit columns defining the "same order"

    Let's say:

    • my_table has a column my_sort_key (e.g., an original import order, a timestamp, an auto-incrementing ID that reflects order).
    • other_table has a column other_sort_key (e.g., a similar original import order, timestamp, etc.) and its id_uuid (the new UUID PK).
    • And when you ORDER BY my_sort_key in my_table and ORDER BY other_sort_key in other_table, the Nth row of each result set should correspond.

    You can use the ROW_NUMBER() window function to achieve this.

    Steps:

    1. Ensure other_table has its id_uuid primary key populated. (As in previous answers).
    2. Add the new UUID column to my_table.
    3. Use an UPDATE statement with ROW_NUMBER() to populate the new column.
    -- Assume other_table is set up with id_uuid and other_sort_key
    -- CREATE TABLE other_table (
    --     other_sort_key INTEGER PRIMARY KEY, -- Or whatever defines its order
    --     id_uuid UUID UNIQUE NOT NULL,       -- The UUID we want to reference
    --     some_data_other VARCHAR
    -- );
    -- INSERT INTO other_table (other_sort_key, id_uuid, some_data_other) VALUES
    -- (1, uuid(), 'Data OT1'),
    -- (2, uuid(), 'Data OT2'),
    -- (3, uuid(), 'Data OT3');
    
    -- Assume my_table has the composite_fk_varchar and its own sort key
    -- CREATE TABLE my_table (
    --     my_id INTEGER PRIMARY KEY,
    --     my_sort_key INTEGER UNIQUE, -- Or whatever defines its order, must be unique for stable row_number
    --     composite_fk_varchar VARCHAR,
    --     extra_info VARCHAR
    -- );
    -- INSERT INTO my_table (my_id, my_sort_key, composite_fk_varchar, extra_info) VALUES
    -- (101, 10, 'old_val_1', 'Info MT1'),
    -- (102, 20, 'old_val_2', 'Info MT2'),
    -- (103, 30, 'old_val_3', 'Info MT3');
    
    BEGIN TRANSACTION;
    
    -- Step 1: Add the new nullable UUID column to my_table
    ALTER TABLE my_table ADD COLUMN other_table_id_fk UUID NULL;
    
    -- Step 2: Update my_table by joining on row numbers
    WITH MyTableOrdered AS (
        SELECT
            my_id, -- Or whatever primary key my_table has
            my_sort_key,
            ROW_NUMBER() OVER (ORDER BY my_sort_key ASC) as rn -- Ensure ASC/DESC matches your logic
        FROM my_table
    ),
    OtherTableOrdered AS (
        SELECT
            id_uuid,
            other_sort_key,
            ROW_NUMBER() OVER (ORDER BY other_sort_key ASC) as rn -- Ensure ASC/DESC matches your logic
        FROM other_table
    )
    UPDATE my_table
    SET other_table_id_fk = ot.id_uuid
    FROM MyTableOrdered mto
    JOIN OtherTableOrdered ot ON mto.rn = ot.rn
    WHERE my_table.my_id = mto.my_id; -- Or join condition to identify the row in my_table
    
    -- Step 3: (Verification - Recommended)
    -- SELECT mt.my_id, mt.my_sort_key, mt.composite_fk_varchar, mt.other_table_id_fk, ot.id_uuid as expected_uuid, ot.other_sort_key
    -- FROM my_table mt
    -- JOIN MyTableOrdered mto ON mt.my_id = mto.my_id
    -- JOIN OtherTableOrdered ot ON mto.rn = ot.rn
    -- ORDER BY mt.my_sort_key;
    
    -- Step 4: Drop the old varchar column
    ALTER TABLE my_table DROP COLUMN composite_fk_varchar;
    
    -- Step 5: Add the foreign key constraint
    ALTER TABLE my_table
    ADD CONSTRAINT fk_my_table_to_other_table
    FOREIGN KEY (other_table_id_fk) REFERENCES other_table(id_uuid);
    -- This will fail if any other_table_id_fk is NULL and the column is NOT NULL,
    -- or if a UUID doesn't exist in other_table (shouldn't happen if row counts match and logic is sound).
    
    COMMIT;
    
    SELECT * FROM my_table;
    

    Explanation:

    1. MyTableOrdered CTE: Assigns a sequential row number (rn) to each row in my_table based on the order defined by my_sort_key.
    2. OtherTableOrdered CTE: Assigns a sequential row number (rn) to each row in other_table based on the order defined by other_sort_key.
    3. UPDATE ... FROM ... JOIN:
      • We update my_table.
      • We join MyTableOrdered (which represents my_table with row numbers) to OtherTableOrdered on their generated row numbers (mto.rn = ot.rn).
      • The WHERE my_table.my_id = mto.my_id (or similar join on my_table's PK) ensures we update the correct row in the actual my_table.
      • SET other_table_id_fk = ot.id_uuid assigns the UUID from the corresponding row in other_table.

    Important Considerations for this method:

    1. Stability of Sort Keys: The my_sort_key and other_sort_key columns must provide a stable and correct corresponding order. If this assumption is flawed, your mapping will be incorrect.
    2. Uniqueness of Sort Keys: For ROW_NUMBER() to be deterministic (give the same row number to the same row every time), the ORDER BY clause within the OVER() clause should ideally be on unique keys. If my_sort_key or other_sort_key can have duplicates, the row numbering for those duplicates is not guaranteed to be consistent, which could lead to mismatches. If they are not unique, add more columns to the ORDER BY to make the ordering unique.
    3. Row Counts: This method implicitly assumes that there's a one-to-one correspondence for the number of rows you intend to map.
      • If my_table has more "orderable" rows than other_table, some rows in my_table won't find a match and their other_table_id_fk will remain NULL (or fail the update if the new column is NOT NULL without a default).
      • If other_table has more "orderable" rows, those extra rows won't be used.
    4. NULLs in Sort Keys: How NULL values are ordered depends on the database (DuckDB defaults to NULLS LAST for ASC and NULLS FIRST for DESC). Be mindful of this if your sort keys can be NULL.

    If "same order" means relying on DuckDB's internal rowid (HIGHLY DISCOURAGED):

    If you have no explicit sort columns and are thinking of relying on the implicit physical order (which, again, is not guaranteed), you could try to use DuckDB's internal rowid. This is very risky and should be a last resort.

    -- DANGEROUS - Relies on implicit, non-guaranteed row order.
    -- Use with extreme caution and only if you understand the risks.
    
    -- Step 1: Add the new nullable UUID column
    -- ALTER TABLE my_table ADD COLUMN other_table_id_fk UUID NULL;
    
    -- Step 2: Update using rowid (example, syntax might need slight adjust or be impossible directly in UPDATE FROM)
    -- This specific UPDATE syntax with rowid joins might be tricky or not directly supported for this purpose.
    -- A more robust way even with rowid would be to select into a temp table first.
    
    -- Safer approach if forced to use rowid:
    -- CREATE TEMP TABLE MyTableWithRowid AS SELECT rowid, my_id FROM my_table ORDER BY rowid; -- "ORDER BY rowid" might be redundant
    -- CREATE TEMP TABLE OtherTableWithRowid AS SELECT rowid, id_uuid FROM other_table ORDER BY rowid;
    
    -- UPDATE my_table
    -- SET other_table_id_fk = ot.id_uuid
    -- FROM MyTableWithRowid mtr
    -- JOIN OtherTableWithRowid otr ON mtr.rowid = otr.rowid -- This assumes rowids are comparable for Nth row, which is the fragile part
    -- WHERE my_table.my_id = mtr.my_id;
    
    -- A more common pattern if rowid is the *only* way:
    -- Create a temp table with generated sequence numbers based on rowid
    BEGIN TRANSACTION;
    ALTER TABLE my_table ADD COLUMN other_table_id_fk UUID NULL;
    
    WITH MyTableNumbered AS (
        SELECT my_id, ROW_NUMBER() OVER (ORDER BY rowid) as rn FROM my_table
    ),
    OtherTableNumbered AS (
        SELECT id_uuid, ROW_NUMBER() OVER (ORDER BY rowid) as rn FROM other_table
    )
    UPDATE my_table
    SET other_table_id_fk = ot.id_uuid
    FROM MyTableNumbered mtn
    JOIN OtherTableNumbered ot ON mtn.rn = ot.rn
    WHERE my_table.my_id = mtn.my_id;
    
    -- ... then drop old column, add FK constraint ...
    COMMIT;
    

    Recommendation: Always prefer using explicit, meaningful columns to define order (my_sort_key, other_sort_key). Relying on implicit order or internal rowid for data mapping is fragile and can lead to silent data corruption if the underlying physical order changes.

    If your data truly implies a corresponding order without explicit keys, your immediate next step should be to try and create those explicit ordering keys if at all possible, even if it's just by adding a new auto-incrementing column to both tables before this operation, assuming they are loaded in the correct order initially.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.