Skip to content
TheChatArchiveThe Chat Archive
Mistralmistral-medium-2505· Mistral AIHugging Face LMArena Human Preference 140K

Can you give me some packages for arch linux that are made to manage CPU in the case of…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Qwenqwen-max-2025-01-25’s answer.
  1. User

    Can you give me some packages for arch linux that are made to manage CPU in the case of speeding up the laptop or to just manage speed clocks automatically

  2. Mistral Assistant

    Certainly! On Arch Linux, you can use several packages and tools to manage CPU performance, including adjusting clock speeds, enabling power-saving modes, or optimizing performance. Here are some useful packages and tools:

    1. CPU Frequency Scaling Tools

    These tools help manage CPU frequency scaling dynamically or manually.

    • cpupower (from linux package or cpupower explicitly)

      • A tool to monitor and control CPU frequency scaling.
      • Install:
        sudo pacman -S cpupower
        
      • Enable and start the service:
        sudo systemctl enable --now cpupower.service
        
      • Check available governors:
        cpupower frequency-info --governors
        
      • Set a governor (e.g., performance, powersave, ondemand):
        sudo cpupower frequency-set --governor performance
        
    • thermald (Intel CPUs)

      • Monitors and controls CPU temperature and performance.
      • Install:
        sudo pacman -S thermald
        
      • Enable and start the service:
        sudo systemctl enable --now thermald
        

    2. Power Management Tools

    These tools help optimize power consumption and performance.

    • tlp (Advanced power management)

      • A great tool for laptops to optimize battery life and performance.
      • Install:
        sudo pacman -S tlp tlp-rdw
        
      • Enable and start the service:
        sudo systemctl enable --now tlp
        
      • Check status:
        sudo tlp-stat -s
        
    • powertop (Power consumption monitoring & tuning)

      • Helps identify power-hungry processes and optimize settings.
      • Install:
        sudo pacman -S powertop
        
      • Run in interactive mode:
        sudo powertop
        
      • Apply auto-tuning:
        sudo powertop --auto-tune
        

    3. Kernel Parameters & CPU Governors

    You can manually set CPU governors via kernel parameters or sysfs.

    • Check available governors:
      cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors
      
    • Set a governor (e.g., performance):
      echo performance | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
      
    • Make it persistent (via sysctl or udev rules).

    4. Undervolting (For Intel CPUs)

    • intel-undervolt (for Intel CPUs)
      • Helps reduce CPU voltage to lower heat and improve battery life.
      • Install:
        yay -S intel-undervolt
        
      • Apply undervolting:
        sudo intel-undervolt apply
        

    5. AMD-Specific Tools

    • amdctl (for AMD CPUs)
      • Helps manage AMD CPU performance and power settings.
      • Install:
        yay -S amdctl
        

    6. Auto-CPUFreq (Automatic CPU Speed Management)

    • auto-cpufreq (Automatically adjusts CPU speed based on workload)
      • Install:
        yay -S auto-cpufreq
        
      • Run:
        sudo auto-cpufreq --install
        

    7. Kernel Tweaks (Optional)

    • Enable performance governor by default (edit /etc/default/grub):
      GRUB_CMDLINE_LINUX_DEFAULT="... cpufreq.default_governor=performance"
      
    • Update GRUB:
      sudo grub-mkconfig -o /boot/grub/grub.cfg
      

    Summary

    • For manual control: cpupower, thermald
    • For automatic optimization: tlp, auto-cpufreq
    • For power monitoring: powertop
    • For undervolting: intel-undervolt (Intel) or amdctl (AMD)

    Would you like help configuring any of these tools specifically?

  3. User

    some of them don't seem to exist also I use an intel cpu can you give me other packages?

  4. Mistral Assistant

    Since you're using an Intel CPU on Arch Linux, here are some alternative and more reliable packages and methods to manage CPU performance, clock speeds, and power efficiency:


    1. cpupower (Best for CPU Frequency Scaling)

    • Purpose: Manually or automatically adjust CPU frequency scaling.
    • Installation:
      sudo pacman -S cpupower
      
    • Enable & Start Service:
      sudo systemctl enable --now cpupower.service
      
    • Check Available Governors:
      cpupower frequency-info --governors
      
    • Set Governor (e.g., performance, powersave, ondemand):
      sudo cpupower frequency-set --governor performance
      
    • Make it persistent (add to /etc/default/cpupower):
      echo 'governor="performance"' | sudo tee /etc/default/cpupower
      

    2. thermald (Intel Thermal Daemon)

    • Purpose: Prevents overheating and dynamically adjusts CPU performance.
    • Installation:
      sudo pacman -S thermald
      
    • Enable & Start Service:
      sudo systemctl enable --now thermald
      
    • Check Status:
      systemctl status thermald
      

    3. intel-pstate (Intel CPU Frequency Driver)

    • Purpose: Better than acpi-cpufreq for modern Intel CPUs.
    • Check if it's active:
      cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
      
      • If it says intel_pstate, it's already in use.
    • Switch to intel_pstate (if not active):
      • Edit /etc/default/grub and add:
        GRUB_CMDLINE_LINUX_DEFAULT="... intel_pstate=active"
        
      • Update GRUB:
        sudo grub-mkconfig -o /boot/grub/grub.cfg
        
      • Reboot.

    4. tlp (Advanced Power Management)

    • Purpose: Optimizes battery life and performance.
    • Installation:
      sudo pacman -S tlp tlp-rdw
      
    • Enable & Start Service:
      sudo systemctl enable --now tlp
      
    • Check Status:
      sudo tlp-stat -s
      

    5. powertop (Power Consumption Tuning)

    • Purpose: Identifies power-hungry processes and optimizes settings.
    • Installation:
      sudo pacman -S powertop
      
    • Run in Interactive Mode:
      sudo powertop
      
    • Apply Auto-Tuning:
      sudo powertop --auto-tune
      

    6. intel-undervolt (Undervolting for Intel CPUs)

    • Purpose: Reduces CPU voltage to lower heat and improve battery life.
    • Installation (from AUR):
      yay -S intel-undervolt
      
    • Apply Undervolting:
      sudo intel-undervolt apply
      
    • Make it persistent:
      sudo intel-undervolt --enable
      

    7. auto-cpufreq (Automatic CPU Speed Management)

    • Purpose: Automatically switches between performance and powersave modes.
    • Installation (from AUR):
      yay -S auto-cpufreq
      
    • Run & Install as a Service:
      sudo auto-cpufreq --install
      
    • Check Status:
      sudo auto-cpufreq --stats
      

    8. stress & cpuburn (CPU Stress Testing)

    • Purpose: Test CPU stability and cooling performance.
    • Installation:
      sudo pacman -S stress cpuburn
      
    • Run Stress Test:
      stress --cpu 8 --timeout 60s
      
      (Replace 8 with your CPU thread count.)

    9. indicator-cpufreq (GUI for CPU Frequency Control)

    • Purpose: A graphical tool to change CPU governors easily.
    • Installation (from AUR):
      yay -S indicator-cpufreq
      
    • Run:
      indicator-cpufreq
      

    10. Kernel Parameters (For Better Performance)

    • Edit /etc/default/grub and add:
      GRUB_CMDLINE_LINUX_DEFAULT="... intel_pstate=active mitigations=off"
      
      • mitigations=off (disables some security features for better performance, use with caution).
    • Update GRUB:
      sudo grub-mkconfig -o /boot/grub/grub.cfg
      
    • Reboot.

    Summary of Best Tools for Intel CPUs on Arch Linux

    ToolPurposeInstallation
    cpupowerCPU frequency scalingsudo pacman -S cpupower
    thermaldThermal managementsudo pacman -S thermald
    intel-pstateBetter CPU frequency driverBuilt into kernel
    tlpPower managementsudo pacman -S tlp
    powertopPower consumption tuningsudo pacman -S powertop
    intel-undervoltUndervoltingyay -S intel-undervolt
    auto-cpufreqAutomatic CPU speed managementyay -S auto-cpufreq

    Would you like help configuring any of these tools further? 🚀

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.