who makes the dial tone in isdn?
- User
who makes the dial tone in isdn?
Assistant
In an ISDN (Integrated Services Digital Network) system, just like in traditional analog PSTN (Public Switched Telephone Network), the dial tone comes from the telephone company's central office or local exchange switch.
Here's why and how:
- Network-Controlled: ISDN is a circuit-switched technology managed by the telephone company's infrastructure. It's designed so the central office equipment controls the state of the line and call setup.
- Signaling: When you lift the handset of an ISDN phone (go "off-hook"), the phone sends a digital signaling message (via the 'D' channel, typically using a protocol like DSS1) to the ISDN switch at the central office.
- Readiness Signal: The ISDN switch receives this "off-hook" signal. If the line is operational and ready to accept digits for dialing, the switch generates the standard dial tone.
- Audio Delivery: The switch sends this audio tone back to your ISDN phone over one of the 'B' channels (the voice channels).
- Phone Plays Tone: Your ISDN phone receives the G.711 encoded audio of the dial tone from the network and plays it through the earpiece.
So, the dial tone on an ISDN phone is a network-generated signal confirming that the switch is ready to accept your dialed digits and initiate the call setup process. It's not generated by the phone hardware itself (unlike most modern VoIP phones where the tone is generated locally after registering with a server).
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.