Skip to content
TheChatArchiveThe Chat Archive
Metallama-4-maverick-03-26-experimental· MetaHugging Face LMArena Human Preference 140K

My proxmox environment had a breaking SSD. On it, an xpenology vm (synology disk…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Mistralmistral-medium-2505’s answer.
  1. User

    My proxmox environment had a breaking SSD. On it, an xpenology vm (synology disk station) was running but the data disks were on on another disk within the proxmox server. That disk works fine. How can I recover the data on it? It is in format qcow2

  2. Meta Assistant

    A broken SSD with a Proxmox VM, but the actual data is safe on another disk... that's a great position to be in! Recovering the data from the qcow2 formatted disk (which is actually a virtual disk, not the physical disk itself) is definitely doable. Here's a step-by-step guide to help you recover your precious Synology data:

    Understanding the setup:

    1. Broken SSD: Held the Proxmox VM (xpenology, aka Synology Disk Station) virtual machine disk (.qcow2 file) with the OS, not the actual data.
    2. Working physical disk: Holds the data disks (virtual disks, also .qcow2 files) used by the xpenology VM. This is the disk you want to recover data from.

    Recovery steps:

    Prerequisites:

    • A working Proxmox server (you've already got this, just with a new SSD)
    • The working physical disk with the data (mounted and accessible in Proxmox)
    • Basic Linux command-line knowledge

    Step 1: Re-create the xpenology VM (without the data disks)

    1. Create a new xpenology VM in Proxmox, just like you did initially. Use the same:
      • VM ID (if you remember it)
      • OS settings (e.g., Debian-based, 64-bit)
      • RAM and CPU settings
      • Do not add any disks (we'll attach the old data disk later)
    2. Boot the new VM with a Synology DSM installer ISO (same version as before, if possible) to ensure compatibility.

    Step 2: Identify and prepare the working data disk

    1. In the Proxmox host shell, find the disk ID of your working physical disk (with the data):
      • Run: lsblk or fdisk -l to identify the disk (e.g., /dev/sda, /dev/sdb, etc.)
      • Note the disk ID (e.g., sda)
    2. Verify the disk has the qcow2 files you need:
      • Run: ls /var/lib/vz/images/<VM_ID>/ (replace <VM_ID> with your original VM ID)
      • You should see .qcow2 files like vm-<VM_ID>-disk-1.qcow2, vm-<VM_ID>-disk-2.qcow2, etc. (these are your data disks)

    Step 3: Attach the old data disk to the new VM

    1. In the Proxmox web interface:
      • Go to your new xpenology VM > Hardware
      • Click Add > Hard Disk
      • Select Unused Disk
      • Choose the existing .qcow2 file from the working disk (identified in Step 2.2, e.g., vm-<VM_ID>-disk-1.qcow2)
      • Do not format or create a new disk; just add the existing one
      • Repeat this process for each additional data disk (if you have multiple)
    2. Verify the disks are attached:
      • In the VM Hardware tab, you should see the added disks (e.g., virtio0, virtio1, etc.)

    Step 4: Boot the new VM and recover the data

    1. Start the new xpenology VM
    2. The VM should now boot into Synology DSM (if it doesn't, ensure you've used the correct installer ISO)
    3. Log in to the Synology Web Interface (find the IP via Proxmox console or your router's DHCP leases)
    4. Go to Storage Manager > Disk Group > Volume
    5. You should see the existing volumes (from the attached data disks) degraded or not mounted
    6. Import the volume (right-click on the volume > Import):
      • Synology should recognize the existing data and import the volume
      • If prompted, do not initialize or format the disks; just import
    7. Once imported, mount the volume (right-click > Mount)
    8. Verify your data is accessible via File Station or Shared Folders

    Additional tips:

    • If Synology doesn't recognize the disks or volumes, you might need to use the Synology Assistant tool (download from Synology's website) to search for and configure the disks.
    • In case of issues, check the Synology Log Center for errors or warnings related to disk import or volume mounting.
    • Back up your data ASAP to an external drive or another NAS to prevent future data loss.

    You're done!

    With these steps, you should have recovered your data from the qcow2 formatted disk. Pat yourself on the back for navigating this process successfully!

    If you encounter any issues or have further questions, feel free to ask. Good luck, and may your data be safe forevermore!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.