Lenovo thinkpad T420 motherboard schemetic indicate vcc5B and someplaces VCC5M what is…
- User
Lenovo thinkpad T420 motherboard schemetic indicate vcc5B and someplaces VCC5M what is the difference that VCC5B and VCC5M
Assistant
In the Lenovo ThinkPad T420 motherboard schematic, VCC5B and VCC5M are both 5V power rails, but they serve different purposes and are active under different conditions. Here's the key difference:
1. VCC5B (5V Battery / Always-On Rail)
- Source: Typically derived from the battery or standby power (VCC3SW) via a boost converter.
- Behavior:
- Always present when the system has battery power (even when the laptop is off or in sleep mode).
- Used for circuits that need power even when the laptop is not fully powered on (e.g., EC (Embedded Controller), RTC (Real-Time Clock), some USB ports for charging, etc.).
- Key Features:
- Does not depend on the main system power state.
- May be generated by a +5V_ALW (Always-On) regulator.
2. VCC5M (5V Main Rail)
- Source: Generated by the main power supply circuit (usually from the +5V rail after the main DC-DC converters).
- Behavior:
- Only active when the system is powered on (S0 state) or in some sleep states (S3/S4).
- Used for components that do not need power when the system is off (e.g., USB data lines, some chipsets, peripherals).
- Key Features:
- Controlled by the power sequencing logic (turns on after the EC enables the main power rails).
- May be switched off during deep sleep (S5) or when the system is shut down.
Summary of Differences:
Feature VCC5B VCC5M Power State Always present (if battery is connected) Only when system is on (S0/S3) Source Battery/standby power Main system power rail Usage EC, RTC, charging circuits USB data, chipsets, peripherals Regulator +5V_ALW (Always-On) Main +5V rail (switched) Troubleshooting Implications:
- If VCC5B is missing, the laptop may not respond to power button presses (EC won't work).
- If VCC5M is missing, the system may power on but fail to boot (USB, chipsets won't get power).
Would you like help locating these rails in the schematic or troubleshooting a specific issue?
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.