Skip to content
TheChatArchiveThe Chat Archive
Googlegemma-3-27b-it· GoogleHugging Face LMArena Human Preference 140K

Do you see any major mistakes in this code? I'm not looking for minor enhancements or…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Coherecommand-a-03-2025’s answer.
  1. User

    Do you see any major mistakes in this code? I'm not looking for minor enhancements or touchups. I'm looking for actual mistakes. Please be concise and to the point. Ask for clarification if you need it.

    fig, axes = plt.subplots(5, 2, figsize=(8, 14))
    axes = axes.flatten()
    
    
    cmap = plt.get_cmap('plasma')
    sm = ScalarMappable(cmap = cmap)
    sm.set_array(np.linspace(-90, 90, 100))
    
    for axes_idx, (lat_section, pressure_section) in enumerate(itertools.product(lat_idx_dict, pressure_idx_dict)):
        subsetting = pressure_idx_dict[pressure_section] & lat_idx_dict[lat_section]
        subsetted_lats = (lats[None,:,None] * np.ones((nn_conf.shape[0], nn_conf.shape[1], 60)))[subsetting]
        axes[axes_idx].scatter(np.log(1 + nn_conf[:,:,0:60][subsetting]), np.log(nn_abs_diff[:,:,0:60][subsetting]), s=4, alpha=0.6, c=subsetted_lats, cmap=cmap, vmin=-90, vmax=90)
        axes[axes_idx].set_title(f'{lat_section} {pressure_section}')
        axes[axes_idx].set_xlabel('Log(1 + Confidence Loss)')
        axes[axes_idx].set_ylabel('Log Absolute Error (log K/s)')
        axes[axes_idx].set_xlim(0, 4)
        axes[axes_idx].set_ylim(-30, 0)
        axes[axes_idx].grid(True, linestyle='--', alpha=0.5)
    cbar = fig.colorbar(sm, ax=axes.tolist(), orientation='vertical', fraction=0.02, pad=0.04)
    cbar.set_label('Latitude', rotation=270, labelpad=15)
    plt.suptitle('Offline Log Absolute Error vs Confidence Loss for dT/dt', fontsize=16)
    plt.tight_layout()
    plt.show()
    
  2. Google Assistant

    Yes, a major mistake:

    The colorbar ax argument expects a list of axes to apply to, but axes.tolist() converts the flattened array of axes into a single list. This will likely result in the colorbar being applied to all subplots, overlapping them. You likely want to pass the first axis in the axes array to the ax argument of fig.colorbar.

    Specifically, change:

    cbar = fig.colorbar(sm, ax=axes.tolist(), orientation='vertical', fraction=0.02, pad=0.04)
    

    to:

    cbar = fig.colorbar(sm, ax=axes[0], orientation='vertical', fraction=0.02, pad=0.04)
    
  3. User

    My code has been running for 4 minutes now, and I'm not sure if that's because there is a mistake or because the code is supposed to take that long. Is there a major mistake causing this?

  4. Google Assistant

    Yes, there's a very likely major performance issue. The repeated indexing with subsetting inside the loop is extremely inefficient. Let's break it down:

    1. nn_conf[:,:,0:60][subsetting] and nn_abs_diff[:,:,0:60][subsetting]: subsetting is a boolean mask. Applying this mask to a NumPy array creates a copy of the data. Inside the loop, you're creating a new copy of slices of nn_conf and nn_abs_diff for every iteration. This is a huge amount of data copying.

    2. (lats[None,:,None] * np.ones((nn_conf.shape[0], nn_conf.shape[1], 60)))[subsetting]: This is even worse. You're broadcasting lats into a 3D array, then multiplying it by another 3D array, then applying the boolean mask, creating yet another copy.

    The combination of these operations within the loop, especially with potentially large nn_conf and nn_abs_diff arrays, will lead to very slow execution.

    How to fix it (major improvement):

    Pre-calculate the subsetted arrays before the loop. This avoids repeated copying.

    # Before the loop:
    subsetted_nn_conf = nn_conf[:,:,0:60][subsetting]
    subsetted_nn_abs_diff = nn_abs_diff[:,:,0:60][subsetting]
    subsetted_lats = (lats[None,:,None] * np.ones((nn_conf.shape[0], nn_conf.shape[1], 60)))[subsetting]
    
    
    for axes_idx, (lat_section, pressure_section) in enumerate(itertools.product(lat_idx_dict, pressure_idx_dict)):
        # Inside the loop, use the pre-calculated arrays:
        axes[axes_idx].scatter(np.log(1 + subsetted_nn_conf), np.log(subsetted_nn_abs_diff), s=4, alpha=0.6, c=subsetted_lats, cmap=cmap, vmin=-90, vmax=90)
        # ... rest of your loop code ...
    

    This change will dramatically reduce the execution time. 4 minutes is almost certainly due to this inefficient indexing.

  5. User

    If I run this code:

    fig, axes = plt.subplots(5, 2, figsize=(8, 14))
    print('fig, axes = plt.subplots(5, 2, figsize=(8, 14))')
    axes = axes.flatten()
    print('axes = axes.flatten()')
    
    cmap = plt.get_cmap('plasma')
    print('cmap = plt.get_cmap(\'plasma\')')
    sm = ScalarMappable(cmap = cmap)
    print('sm = ScalarMappable(cmap = cmap)')
    sm.set_array(np.linspace(-90, 90, 100))
    print('sm.set_array(np.linspace(-90, 90, 100))')
    
    for axes_idx, (lat_section, pressure_section) in enumerate(itertools.product(lat_idx_dict, pressure_idx_dict)):
        print(f'Processing {lat_section} {pressure_section}')
        subsetting = pressure_idx_dict[pressure_section] & lat_idx_dict[lat_section]
        print(f'subsetting shape: {subsetting.shape}')
        subsetted_lats = (lats[None,:,None] * np.ones((nn_conf.shape[0], nn_conf.shape[1], 60)))[subsetting]
        print(f'subsetted_lats shape: {subsetted_lats.shape}')
        axes[axes_idx].scatter(np.log(1 + nn_conf[:,:,0:60][subsetting]), np.log(nn_abs_diff[:,:,0:60][subsetting]), s=4, alpha=0.6, c=subsetted_lats, cmap=cmap, vmin=-90, vmax=90)
        print(f'axes[{axes_idx}].scatter(...)')
        axes[axes_idx].set_title(f'{lat_section} {pressure_section}')
        axes[axes_idx].set_xlabel('Log(1 + Confidence Loss)')
        axes[axes_idx].set_ylabel('Log Absolute Error (log K/s)')
        axes[axes_idx].set_xlim(0, 4)
        axes[axes_idx].set_ylim(-30, 0)
        axes[axes_idx].grid(True, linestyle='--', alpha=0.5)
        print('completed axes_idx:', axes_idx)
    print('Completed all axes processing')
    

    I get to: 'Completed all axes processing'

    very quickly but the code cell is still running. I made sure to comment out all code after that last print statement so what could possibly be causing the hang?

  6. Google Assistant

    This is a classic case of a lingering background process. The issue isn't the code you're running anymore, but something triggered by the code that's still active. Specifically, it's almost certainly the colorbar.

    Even though you've commented out the plt.show() and subsequent code, the fig.colorbar() call initiates a process that updates the figure. This update can sometimes hang, especially in environments like Jupyter notebooks or interactive plotting backends.

    Solution:

    Explicitly close the figure after the loop. Add this line after your last print statement:

    plt.close(fig)
    

    This forces the figure and any associated background processes (like the colorbar update) to terminate. It's a common practice to include plt.close() after you're finished with a figure, especially in loops or interactive environments.

  7. User

    This code actually stalls on plt.show(). Everything else runs fairly quickly.

    fig, axes = plt.subplots(5, 2, figsize=(8, 14))
    print('fig, axes = plt.subplots(5, 2, figsize=(8, 14))')
    axes = axes.flatten()
    print('axes = axes.flatten()')
    
    cmap = plt.get_cmap('plasma')
    print('cmap = plt.get_cmap(\'plasma\')')
    sm = ScalarMappable(cmap = cmap)
    print('sm = ScalarMappable(cmap = cmap)')
    sm.set_array(np.linspace(-90, 90, 100))
    print('sm.set_array(np.linspace(-90, 90, 100))')
    
    for axes_idx, (lat_section, pressure_section) in enumerate(itertools.product(lat_idx_dict, pressure_idx_dict)):
        print(f'Processing {lat_section} {pressure_section}')
        subsetting = pressure_idx_dict[pressure_section] & lat_idx_dict[lat_section]
        print(f'subsetting shape: {subsetting.shape}')
        subsetted_lats = (lats[None,:,None] * np.ones((nn_conf.shape[0], nn_conf.shape[1], 60)))[subsetting]
        print(f'subsetted_lats shape: {subsetted_lats.shape}')
        axes[axes_idx].scatter(np.log(1 + nn_conf[:,:,0:60][subsetting]), np.log(nn_abs_diff[:,:,0:60][subsetting]), s=4, alpha=0.6, c=subsetted_lats, cmap=cmap, vmin=-90, vmax=90)
        print(f'axes[{axes_idx}].scatter(...)')
        axes[axes_idx].set_title(f'{lat_section} {pressure_section}')
        axes[axes_idx].set_xlabel('Log(1 + Confidence Loss)')
        axes[axes_idx].set_ylabel('Log Absolute Error (log K/s)')
        axes[axes_idx].set_xlim(0, 4)
        axes[axes_idx].set_ylim(-30, 0)
        axes[axes_idx].grid(True, linestyle='--', alpha=0.5)
        print('completed axes_idx:', axes_idx)
    print('Completed all axes processing')
    # cbar = fig.colorbar(sm, ax=axes.tolist(), orientation='vertical', fraction=0.02, pad=0.04)
    cbar = fig.colorbar(sm, ax=axes[0], orientation='vertical', fraction=0.02, pad=0.04)
    print('cbar = fig.colorbar(sm, ax=axes[0], orientation=\'vertical\', fraction=0.02, pad=0.04)')
    cbar.set_label('Latitude', rotation=270, labelpad=15)
    print('cbar.set_label(\'Latitude\', rotation=270, labelpad=15)')
    plt.suptitle('Offline Log Absolute Error vs Confidence Loss for dT/dt', fontsize=16)
    print('plt.suptitle(\'Offline Log Absolute Error vs Confidence Loss for dT/dt\', fontsize=16)')
    plt.tight_layout()
    print('plt.tight_layout()')
    plt.show()
    print('plt.show()')
    plt.close(fig)
    print('Closed the figure')
    
  8. Google Assistant

    Okay, that clarifies things significantly. The stall on plt.show() strongly suggests the issue is with the plotting backend itself, and the amount of data being rendered. Here's the breakdown and solution:

    The Problem:

    You're creating a figure with 10 subplots, each containing a scatter plot with potentially a large number of points (determined by the size of subsetting). The plotting backend (likely interactive in a Jupyter environment) is struggling to render all that data at once. plt.show() is the point where it attempts to display the entire figure, and it's getting bogged down.

    Solution:

    Save the figure to a file instead of displaying it with plt.show(). This bypasses the interactive rendering process and writes the figure to disk. This is much faster and more reliable for complex plots.

    fig, axes = plt.subplots(5, 2, figsize=(8, 14))
    # ... (your plotting code) ...
    
    plt.suptitle('Offline Log Absolute Error vs Confidence Loss for dT/dt', fontsize=16)
    plt.tight_layout()
    
    fig.savefig('my_plot.png')  # Or .pdf, .jpg, etc.
    print('Figure saved to my_plot.png')
    plt.close(fig)
    print('Closed the figure')
    

    Explanation:

    • fig.savefig('my_plot.png'): This saves the figure to a PNG file (you can choose other formats). The rendering is done in a non-interactive way, which is much more efficient.
    • plt.close(fig): Still important to release the figure's resources.

    This approach will almost certainly resolve the hang. If you absolutely need to display the figure interactively, you might need to reduce the number of points in your scatter plots (e.g., by downsampling or using a different visualization technique) or switch to a different plotting backend. However, saving to a file is the most reliable solution in this case.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.