how to stop python script, like "die" in perl
- User
how to stop python script, like "die" in perl
- Assistant
In Python the closest equivalents to Perl’s
die(i.e., “abort execution right now, optionally with an exit code/message”) are:- sys.exit([status])
- raise SystemExit([status])
- (interactive-only) exit() / quit()
Details & examples
Perl Python Notes die "msg\n"import sys; sys.exit("msg")Prints message to stderr and exits with non-zero status (actually status = 1 unless you override). die(no args)import sys; sys.exit()Exits with status 0 (success). die 255import sys; sys.exit(255)Exits with user-supplied numeric status (0–255 on Unix). croak "msg"(Carp)raise RuntimeError("msg")Raises an exception that can be caught by callers. Option 1 –
sys.exitimport sys if error_detected: sys.stderr.write("Fatal: config file missing\n") sys.exit(1) # any non-zero number => failureOption 2 – raise
SystemExitif not valid: raise SystemExit("Bad input!") # identical behavior to sys.exit()Why two ways?
sys.exit()simply raises theSystemExitexception under the hood.- Catching
SystemExitis possible (but rarely done) so libraries can perform cleanup.
Not just for scripts — for libraries
def dangerous(): if something_wrong: raise RuntimeError("panic!") try: dangerous() except RuntimeError as e: print("caught:", e)Use a regular exception (e.g.
RuntimeError, custom (MyFatalError)) when you want callers to have a chance to recover; usesys.exit/SystemExitwhen you truly want the whole program to terminate.Cleanup (
finally, atexit) Python guaranteesfinallyblocks andatexithandlers still run onsys.exit/SystemExit, so:import sys, atexit atexit.register(lambda: print("closing resources")) sys.exit("bye") # prints “closing resources” firstInteractive shortcut
>>> exit() # or quit()Those are aliases added by the
sitemodule; they callsys.exitunder the hood.Summary
- Need to end script immediately?
import sys; sys.exit(<msg-or-code>) - Want to signal fatal but recoverable error?
raise SomeException("msg")
That’s effectively Python’s “die.”
- User
长宽高158c'm
- Assistant
“长 + 宽 + 高 = 158 cm” 通常是航空公司对托运行李尺寸的限制(也叫 “三边之和/线性尺寸” 不超过 158 cm)。下面给你几个常见问题的快速说明和小工具,看看是不是你想要的:
✈️ 1. 这 158 cm 到底怎么算?
• 把行李放在硬地,拿卷尺量最长、最宽、最高三条边,然后相加。
• 只要 L + W + H ≤ 158 cm,就符合大多数国际航司的托运规则。
• 这 158 cm 不是体积,也不是单边 158 cm,而是三条边之和。
📏 2. 有没有“安全尺寸”示例?
(下表给出几组典型行李箱尺寸,全部满足 ≤ 158 cm)建议尺寸 (cm) 三边和 对应英寸 (约) 常见箱子英寸标称 75 × 50 × 30 155 29.5″ × 19.7″ × 11.8″ 28–29″ 箱 70 × 48 × 35 153 27.6″ × 18.9″ × 13.8″ 26–27″ 箱 76 × 51 × 29 156 29.9″ × 20.1″ × 11.4″ 28–29″ 箱 65 × 45 × 45 155 25.6″ × 17.7″ × 17.7″ 方形箱/大背包 如果想更保险,可以把总和控制在 150 cm 以内,因为有些航司量得比较严格/箱体外突。
🛠️ 3. 想自己算?给你一段 15 行的小脚本(Python)
再也不怕量错,随手输数字就知道合不合规:def check_bag(l, w, h, limit=158): total = l + w + h ok = total <= limit print(f"尺寸: {l}×{w}×{h} = {total} cm (≤ {limit}? {'✅ 合规' if ok else '❌ 超标'})") return ok # 示例 check_bag(75, 50, 30) # 155 cm -> ✅ check_bag(80, 55, 34) # 169 cm -> ❌
🔄 4. 换算到英寸速查
1 inch = 2.54 cm
158 cm ÷ 2.54 ≈ 62.2 inch(所以你也常看到“62 linear inches”)
🎒 5. 如果实在超了怎么办?
• 能拆分就拆分成两件托运,或者一部分随身带上机(随身一般 115 cm 三边和)。
• 询问航空公司购买超尺寸/超重额外额度的价格(视航司而定,有的 300–1000 RMB 不等)。
• 压缩带 + 真空袋:降低高度;或者换成更软的旅行包能略压一下外形尺寸。
还有什么细节(具体航司规定、重量配比、还是箱子推荐)想了解,欢迎再问 😉
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.