what are things i need for custom split keyboard. i want to make it myself and i need to…
- User
what are things i need for custom split keyboard. i want to make it myself and i need to order things
- Assistant
Components for a Custom Split Keyboard
Here's what you'll need to build your own custom split keyboard:
Essential Components
- Microcontroller(s): Pro Micro, Elite-C, or nice!nano (for wireless)
- Key switches: Cherry MX, Gateron, Kailh, etc.
- Keycaps: MX-compatible in your preferred profile (DSA, SA, OEM, etc.)
- PCB: Either purchase a pre-designed PCB or create your own
- Diodes: Usually 1N4148 (one per key)
- TRRS jacks (2): For connecting the halves (if using wired connection)
- TRRS cable: To connect the two halves
- USB cable: For connecting to your computer
Additional Components
- Case/plates: Either 3D print, laser cut, or purchase
- Standoffs/screws: For mounting PCB to case
- Stabilizers: For larger keys (if your design has any)
- LEDs (optional): For backlighting or underglow
- Resistors (optional): If using LEDs
- Reset switches: For flashing firmware
Tools
- Soldering iron and solder
- Flush cutters
- Screwdriver
- Tweezers
- Multimeter (recommended for testing)
Software
- QMK or ZMK firmware: For programming your keyboard
- Keyboard layout designer: Like Keyboard Layout Editor or KiCad (if designing PCB)
If you're new to this, you might want to consider starting with a kit that includes most components and instructions, such as the Lily58, Corne, or Sofle keyboards.
Would you like more specific recommendations for any of these components?
- User
i want wired keyboard, with kalih switches and blank keycaps.
- Assistant
Custom Split Keyboard Components for Your Build
Based on your preferences for a wired keyboard with Kailh switches and blank keycaps, here's what you'll need:
Core Components
Microcontrollers
- 2× Pro Micro controllers (one for each half)
- Alternatives: Elite-C or Proton-C (more durable USB ports)
Connectivity
- 2× TRRS jacks (one for each half)
- 1× TRRS cable (to connect the halves)
- 1× USB-C or Micro USB cable (depending on your controller)
Switches and Keycaps
- Kailh switches (quantity depends on your layout, typically 60-70 for a split)
- Options: Kailh Box, Kailh Speed, Kailh Pro (specify which type you prefer)
- Blank keycaps (MX-compatible)
- Common profiles: DSA, XDA, or Cherry profile
- Materials: PBT is more durable than ABS
Electronics
- Diodes (1N4148) - one per key
- 2× Reset switches
- Wire for any hand-wiring (if not using a PCB)
Structural Components
PCB Options
- Pre-designed PCB for a specific split keyboard model (Lily58, Corne, Sofle, Iris, etc.)
- OR components for hand-wiring:
- Switch plates (laser-cut acrylic or aluminum)
- Bottom plates
Case and Hardware
- Case halves (3D printed, laser-cut acrylic, or CNC aluminum)
- Standoffs (typically M2 size)
- Screws for standoffs
- Rubber feet
Tools Needed
- Soldering iron and solder
- Flush cutters
- Small screwdriver set
- Tweezers
- Multimeter (for troubleshooting)
Recommended Vendors
- KBDfans, Keeb.io, SplitKB, Little Keyboards, or MKUltra for parts
- AliExpress or KPrepublic for budget options
- JLCPCB or PCBWay if you're making custom PCBs
Would you like specific recommendations for any particular split keyboard model or more details on any of these components?
- 2× Pro Micro controllers (one for each half)
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.