Skip to content
TheChatArchiveThe Chat Archive
gpt-4.1-2025-04-14· OpenAIHugging Face LMArena Human Preference 140K

how does zscaler work if only some websites within my company will work while it is…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-3-7-sonnet-20250219-thinking-32k’s answer.
  1. User

    how does zscaler work if only some websites within my company will work while it is running?

  2. Assistant

    If only some websites within your company work while Zscaler is running, it suggests that Zscaler is actively filtering or controlling your web traffic. Here’s a breakdown of how Zscaler works and why you might be experiencing this issue:


    How Zscaler Works

    Zscaler is a cloud-based security platform that acts as a secure gateway between your device and the internet. It inspects and filters all web traffic according to your company’s security policies. Here’s what typically happens:

    1. Traffic Redirection: Your web traffic is routed through Zscaler’s cloud servers.
    2. Inspection: Zscaler inspects the traffic for threats, data leaks, and policy violations.
    3. Policy Enforcement: Based on rules set by your IT/security team, Zscaler allows, blocks, or restricts access to certain websites or web applications.
    4. Logging & Reporting: All activity is logged for security and compliance purposes.

    Why Only Some Websites Work

    If only some websites are accessible, it’s likely due to one or more of the following reasons:

    1. Access Policies

    • Your company’s IT team has set up policies that only allow access to approved (whitelisted) websites.
    • Other sites may be blocked or restricted based on categories (e.g., social media, streaming, personal email).

    2. SSL Inspection Issues

    • Zscaler often performs SSL inspection (decrypting and inspecting HTTPS traffic).
    • If a site uses certificate pinning or has unusual SSL configurations, Zscaler may block it or fail to load it properly.

    3. Authentication Problems

    • If you’re not properly authenticated with Zscaler, it may only allow access to internal or approved sites.
    • Sometimes, a login or authentication prompt is missed or not working.

    4. Misconfiguration

    • There could be a misconfiguration in the Zscaler policy or in your device’s network settings.
    • Proxy settings or Zscaler client connector issues can cause partial connectivity.

    5. Network or DNS Issues

    • Zscaler may be filtering DNS requests, and if DNS is not resolving correctly, some sites won’t load.

    What You Can Do

    1. Check for Zscaler Client Connector:
      If you have a Zscaler app or connector installed, make sure it’s running and you’re logged in.

    2. Contact IT Support:
      Your IT/security team controls Zscaler policies. If you need access to certain sites, request an exception or whitelist.

    3. Check for Authentication Prompts:
      Sometimes, you may need to log in to a Zscaler portal or re-authenticate.

    4. Try a Different Network:
      If possible, test on another network (e.g., home Wi-Fi) to see if the issue persists. This can help determine if Zscaler is the cause.

    5. Clear Browser Cache and Cookies:
      Sometimes, cached data can interfere with authentication or policy enforcement.


    Summary Table

    Possible CauseWhat HappensWhat to Do
    Access PolicySome sites blocked/allowedRequest access from IT
    SSL InspectionSome HTTPS sites fail to loadReport to IT for exceptions
    AuthenticationOnly limited sites workLog in to Zscaler/portal
    MisconfigurationRandom sites work/don’t workReinstall Zscaler, check proxy
    DNS IssuesSites don’t resolveFlush DNS, check settings

    If you need more specific troubleshooting steps, let me know what error messages you see or which types of sites are/aren’t working!

  3. User

    there isn't an issue with zscaler, I'm just curious as to how it works if only some websites can be used only if it is running

  4. Assistant

    Great clarification! If only some websites can be used when Zscaler is running (and not when it’s off), it means your company’s network is configured to require Zscaler for internet access. Here’s how and why that works:


    How Zscaler Can Be Required for Web Access

    1. Forced Proxy or Tunnel

    • Zscaler acts as a proxy: Your device is set up (by IT) to send all web traffic through Zscaler’s cloud proxy.
    • Only traffic routed through Zscaler is allowed: The company firewall or network blocks direct access to the internet, so only traffic that goes through Zscaler is permitted.
    • Result: If Zscaler is off, your requests don’t reach the internet (except for a few internal or whitelisted sites).

    2. Split Tunneling or Policy-Based Routing

    • Some companies use split tunneling: Only certain types of traffic (like business-critical apps) are allowed to bypass Zscaler, while all other web traffic must go through it.
    • Result: Only approved sites work without Zscaler; everything else requires Zscaler to be running.

    3. DNS and Firewall Controls

    • DNS Filtering: The company DNS servers may only resolve certain domains unless Zscaler is active.
    • Firewall Rules: The firewall may block all outbound web traffic except from Zscaler’s IP addresses or tunnels.
    • Result: Without Zscaler, most sites are unreachable.

    4. Authentication and Access Control

    • Zscaler enforces user authentication: Only authenticated users (via Zscaler) can access the internet.
    • Result: If Zscaler isn’t running, you’re not authenticated, so access is denied except for a few allowed sites.

    Why Do Companies Do This?

    • Security: Ensures all web traffic is inspected for threats, data leaks, and policy violations.
    • Compliance: Meets regulatory requirements for monitoring and controlling internet use.
    • Visibility: Gives IT full visibility into user activity and web usage.
    • Control: Prevents users from bypassing security controls by going direct to the internet.

    Summary Table

    ScenarioWith Zscaler ONWith Zscaler OFF
    Proxy/Tunnel RequiredAll/most sites workOnly a few sites work
    Split TunnelingSome sites workOnly whitelisted sites work
    DNS/Firewall RestrictionsAll/most sites workMost sites blocked
    Authentication RequiredAll/most sites workMost sites blocked

    In short:
    Your company’s network is set up so that Zscaler is the “gatekeeper” for internet access. If Zscaler isn’t running, you’re either blocked from the internet or only allowed to access a very limited set of sites (like internal resources or company portals).

    If you want more technical details (like how the proxy or tunnel is enforced), let me know!

  5. User

    hmm it's the other way around, most of the internet works with zscaler off but internal resources do not work while it is off

  6. Assistant

    Thank you for clarifying! This is a very common setup in organizations that use Zscaler, and it makes sense once you understand how Zscaler is often deployed.


    What’s Happening?

    • When Zscaler is OFF:

      • You can access most of the public internet (Google, news, etc.).
      • You cannot access internal company resources (intranet, internal apps, private servers).
    • When Zscaler is ON:

      • You can access both the public internet and your company’s internal resources.

    Why Does This Happen?

    1. Zscaler as a Secure Access Gateway

    • Many companies use Zscaler not just for web filtering, but also as a Zero Trust Network Access (ZTNA) solution.
    • ZTNA means you don’t get access to internal resources unless you’re authenticated and connected through a secure channel (like Zscaler).

    2. Private Access (ZPA)

    • Zscaler Private Access (ZPA) is a product that allows remote users to securely access internal apps without a VPN.
    • When Zscaler is running, it creates a secure tunnel from your device to the company’s internal network, allowing access to private resources.
    • When Zscaler is off, that tunnel doesn’t exist, so you can’t reach internal resources.

    3. Split Access Model

    • Your company’s network is set up so that:
      • Public internet: Accessible directly, with or without Zscaler.
      • Internal resources: Only accessible via Zscaler (or VPN), for security and access control.

    How Does This Work Technically?

    • Zscaler Client Connector (formerly Zscaler App) is installed on your device.
    • When you turn it on, it:
      • Authenticates you.
      • Routes traffic for internal resources through Zscaler’s secure cloud, which then connects to your company’s network.
    • When it’s off, your device has no route to those internal resources, so they’re unreachable.

    Why Do Companies Do This?

    • Security: Prevents unauthorized access to sensitive internal systems.
    • Zero Trust: Only authenticated, managed devices can access internal apps.
    • No VPN Needed: Zscaler provides secure access without the hassle of traditional VPNs.

    Summary Table

    Zscaler StatusPublic InternetInternal Resources
    ONYesYes
    OFFYesNo

    In summary:
    Your company uses Zscaler to provide secure, authenticated access to internal resources. The public internet is open, but internal apps are only available when Zscaler is running, acting as a secure gateway.

    If you want more technical details about how Zscaler Private Access (ZPA) works, or how routing is handled, just ask!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.