Skip to content
TheChatArchiveThe Chat Archive
Qwenqwen3-235b-a22b-no-thinking· Alibaba (Qwen)Hugging Face LMArena Human Preference 140K

So, for a flat surface the pressure within bulk of the liquid is higher than without…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-sonnet-4-20250514’s answer.
  1. User

    So, for a flat surface the pressure within bulk of the liquid is higher than without surface tension? How the increase in pressure can be calculated?

  2. Qwen Assistant

    Great follow-up! You're now connecting surface tension to pressure differences, which leads us directly to a key concept in fluid mechanics: the Young–Laplace equation.

    Let’s clarify your question:

    "So, for a flat surface the pressure within bulk of the liquid is higher than without surface tension?"

    Actually, for a flat surface, there is no pressure difference across the interface due to surface tension. That is:

    • In a flat surface, like still water in a bowl, the pressure just below the surface (in the liquid) is equal to the pressure just above the surface (in the air), assuming no external forces like gravity or atmospheric pressure effects.
    • So, surface tension alone does not cause a pressure difference unless the surface is curved.

    🔍 Why Is That?

    Surface tension creates a pressure jump only when the surface is curved—this is because the tension acts along a curve, and the geometry causes a net inward force.

    This idea is formalized by the Young–Laplace equation:

    ΔP=γ(1R1+1R2)\Delta P = \gamma \left( \frac{1}{R_1} + \frac{1}{R_2} \right)

    Where:

    • ΔP=Pinside−Poutside\Delta P = P_{\text{inside}} - P_{\text{outside}} is the pressure difference across the surface,
    • γ\gamma is the surface tension (N/m),
    • R1R_1 and R2R_2 are the principal radii of curvature at a point on the surface.

    📐 Case 1: Flat Surface → No Pressure Difference

    For a flat surface, both radii of curvature are infinite:

    R1=R2=∞⇒1R1+1R2=0⇒ΔP=0R_1 = R_2 = \infty \quad \Rightarrow \quad \frac{1}{R_1} + \frac{1}{R_2} = 0 \quad \Rightarrow \quad \Delta P = 0

    ✅ Conclusion:
    There's no pressure difference across a flat liquid surface due to surface tension. Any pressure differences would come from other sources like gravity or external forces.


    📐 Case 2: Spherical Droplet → Positive Pressure Inside

    In a spherical droplet (e.g., a water drop in air), the two principal radii are equal:

    R1=R2=R⇒ΔP=γ(1R+1R)=2γRR_1 = R_2 = R \quad \Rightarrow \quad \Delta P = \gamma \left( \frac{1}{R} + \frac{1}{R} \right) = \frac{2\gamma}{R}

    ✅ The pressure inside the droplet is higher than outside — this is why small droplets have much higher internal pressure.


    📐 Case 3: Soap Bubble → Double the Tension Effect

    A soap bubble has two surfaces (inner and outer), so the pressure difference is doubled:

    ΔP=4γR\Delta P = \frac{4\gamma}{R}

    🧪 Example Calculation

    Suppose you have a spherical water droplet with radius R=1 mm=0.001 mR = 1 \, \text{mm} = 0.001 \, \text{m}, and surface tension of water γ=0.072 N/m\gamma = 0.072 \, \text{N/m}:

    ΔP=2×0.0720.001=144 Pa\Delta P = \frac{2 \times 0.072}{0.001} = 144 \, \text{Pa}

    That’s a small number compared to atmospheric pressure (~10⁵ Pa), but significant for small-scale systems like cells or microfluidics.


    💡 Summary

    Surface TypeCurvaturePressure Jump Due to Surface Tension?Formula
    FlatNone❌ NoΔP=0\Delta P = 0
    SphericalSymmetric✅ YesΔP=2γR\Delta P = \frac{2\gamma}{R}
    CylindricalOne side✅ YesΔP=γR\Delta P = \frac{\gamma}{R}
    BubbleTwo sides✅ Yes (double effect)ΔP=4γR\Delta P = \frac{4\gamma}{R}

    Would you like to explore how this connects to capillary action, contact angles, or how surfactants affect this pressure balance? Let me know and I can expand further! 😊

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.