Skip to content
The Chat Archive
gemma-3n-e4b-it· Google LMArena Human Preference 140K

does it make sense that single thread iperf3 gives me much worse results than a web test…

  1. User

    does it make sense that single thread iperf3 gives me much worse results than a web test speed, but say 8 parallel threads come close to it?

  2. Assistant

    Yes, that absolutely makes sense. Here's a breakdown of why single-threaded iperf3 often performs poorly compared to web test speeds, and why increasing the number of threads can improve the results:

    Understanding the Differences

    • iperf3: Raw Throughput Measurement: iperf3 is designed to measure the raw network throughput between two points. It focuses on sending and receiving data as quickly as possible. It's a very direct measure of network bandwidth. It's good for identifying bottlenecks in the network itself (e.g., a slow network card, a congested link).

    • Web Tests: Application-Level Performance: Web tests (like those using tools like wrk, ApacheBench, or even browser-based performance tests) simulate real-world user behavior. They involve:

      • HTTP/HTTPS Overhead: Web traffic involves HTTP/HTTPS headers, connection establishment, and other protocol-specific overhead. This overhead significantly impacts the overall throughput.
      • Caching: Web browsers and servers often use caching mechanisms. Repeated requests for the same content will be much faster than new requests.
      • Content Complexity: Web pages often contain images, CSS, JavaScript, and other resources. The complexity of the content affects the amount of data transferred.
      • Server-Side Processing: The web server needs to process the requests, potentially interacting with databases or other backend systems.
      • Connection Pooling: Web servers often use connection pooling to reuse existing connections, reducing the overhead of establishing new connections for each request.

    Why Single-Threaded iperf3 is Poor

    • Single Core Limitation: A single-threaded iperf3 test is limited by the processing power of a single CPU core. It can only send and receive data at a rate determined by that core's capabilities.
    • Network Card Bottleneck: The network card itself might be the limiting factor. A single-threaded test might not be able to fully saturate the network card's capabilities.
    • Lack of Parallelism: It doesn't leverage the power of multiple CPU cores to send and receive data concurrently.

    Why Multiple Threads Improve Results

    • Parallelism: When you use multiple threads with iperf3, you're effectively utilizing multiple CPU cores to send and receive data simultaneously. This significantly increases the overall throughput.
    • Overcoming Single-Core Bottlenecks: By distributing the workload across multiple cores, you can overcome the limitations of a single core.
    • Better Network Card Utilization: Multiple threads can send data to different parts of the network simultaneously, leading to better utilization of the network card.
    • Simulating Real-World Load: The increased throughput with multiple threads more closely resembles the load experienced by a web server handling multiple concurrent requests.

    The Web Test Connection

    The fact that 8 parallel threads in iperf3 get close to web test speeds suggests that:

    1. Your network is capable of handling more bandwidth than a single core can provide.
    2. The bottleneck isn't just the network itself, but also the single-threaded nature of the iperf3 test.
    3. The web test is accounting for HTTP/HTTPS overhead, caching, and server-side processing, which are not factored into the raw throughput of iperf3.

    In summary:

    • iperf3 is a raw throughput measurement.
    • Web tests simulate real-world application performance.
    • Multiple threads in iperf3 leverage parallelism to improve throughput.

    Therefore, it's perfectly normal for multiple-threaded iperf3 to perform better than single-threaded iperf3, and for it to approach the performance of a web test, especially when the web test accounts for the complexities of web traffic.

    To further diagnose the situation, consider:

    • Network Card: Is your network card capable of handling the bandwidth you're trying to test?
    • CPU Cores: How many CPU cores does your machine have?
    • iperf3 Version: Make sure you're using a recent version of iperf3 (3.x).
    • Network Configuration: Are there any network devices (routers, switches) that might be limiting bandwidth?
    • Web Test Configuration: What are the settings of your web test (number of concurrent users, duration, etc.)?
  3. User

    to get closer to raw speed, should I test in UDP?

  4. Assistant

    Yes, absolutely! Testing with UDP (User Datagram Protocol) in iperf3 will give you a much closer measurement of raw network speed compared to TCP.

    Here's why:

    • TCP's Reliability Overhead: TCP (Transmission Control Protocol) is a connection-oriented protocol that provides reliable data transfer. This reliability comes at a cost:

      • Connection Establishment: TCP requires a handshake to establish a connection before data transfer can begin.
      • Error Checking and Retransmission: TCP includes mechanisms to detect and retransmit lost or corrupted packets.
      • Flow Control: TCP manages the rate of data transfer to prevent the receiver from being overwhelmed.
      • Congestion Control: TCP adjusts the sending rate based on network congestion.

      All of these features add overhead to the data transfer process, reducing the effective raw throughput.

    • UDP's Simplicity: UDP is a connectionless protocol that doesn't provide reliability guarantees. It simply sends data packets without any error checking or retransmission. This makes it much faster and more efficient for raw throughput testing.

    When to use UDP vs. TCP:

    • UDP:

      • Raw Throughput Measurement: Ideal for measuring the maximum achievable network speed.
      • Latency-Sensitive Applications: Suitable for applications where low latency is more important than guaranteed delivery (e.g., online gaming, video streaming).
      • Multicasting/Broadcasting: UDP is well-suited for sending data to multiple recipients simultaneously.
    • TCP:

      • Reliable Data Transfer: Essential for applications where data integrity is critical (e.g., web browsing, file transfer).
      • Ordered Delivery: TCP guarantees that data packets will be delivered in the correct order.
      • Connection-Oriented: TCP establishes a connection before data transfer begins.

    Important Considerations when using UDP:

    • Packet Loss: UDP doesn't guarantee delivery, so you might experience packet loss. This can affect the accuracy of your results. You can use tools like mtr or ping to check for packet loss.
    • No Ordering: UDP packets might arrive out of order. Applications using UDP need to handle reordering if necessary.
    • Firewall Issues: Some firewalls might block UDP traffic.

    How to run iperf3 with UDP:

    Simply add the -u flag to your iperf3 command:

    iperf3 -u -c <server_ip_address> -t <number_of_seconds>
    

    Replace <server_ip_address> with the IP address of the server you want to test against, and <number_of_seconds> with the duration of the test.

    In conclusion:

    If your goal is to measure the maximum raw network speed, using UDP with iperf3 is the best approach. It will give you a more accurate picture of your network's capabilities than TCP. Just be aware of the potential for packet loss and the lack of guaranteed delivery.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.