Skip to content
TheChatArchiveThe Chat Archive
Qwenqwen3-30b-a3b· Alibaba (Qwen)Hugging Face LMArena Human Preference 140K

Start at idle rpm

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with grok-3-mini-beta’s answer.
  1. User

    Start at idle rpm

  2. Qwen Assistant

    Here’s a revised Torque & Power Table starting at idle RPM (600 RPM), with 6 key points. This assumes the motor maintains peak torque (45 Nm) at 0 RPM and decreases linearly to 0 Nm at 8,500 RPM.


    Torque & Power Table (6 Points)

    RPMTorque (Nm)Power (kW)
    60041.82.6
    1,50037.15.8
    3,50026.58.0 (Peak Power)
    5,00018.87.5
    7,0006.34.4
    8,5000.00.0

    Key Notes:

    1. Torque Calculation:

      • Linear decrease:
        Torque=45×(1−RPM8,500)\text{Torque} = 45 \times \left(1 - \frac{\text{RPM}}{8,500}\right)
      • Example: At 600 RPM, torque = 45×(1−600/8,500)≈41.8 Nm45 \times (1 - 600/8,500) ≈ 41.8 \, \text{Nm}.
    2. Power Calculation:

      • Power (kW)=Torque (Nm)×RPM×π30,000\text{Power (kW)} = \frac{\text{Torque (Nm)} \times \text{RPM} \times \pi}{30,000}
      • Example: At 3,500 RPM, power = 26.5×3,500×π30,000≈8.0 kW\frac{26.5 \times 3,500 \times \pi}{30,000} ≈ 8.0 \, \text{kW}.
    3. Idle RPM (600):

      • Torque is slightly reduced from peak (45 Nm) but still high (~41.8 Nm).
      • Power is low (~2.6 kW) due to low RPM.

    Graph Summary:

    • Torque Curve: Starts at 41.8 Nm (idle) and decreases linearly to 0 Nm at 8,500 RPM.
    • Power Curve: Peaks at 8 kW (~3,500 RPM), then declines.

    Visual Representation (ASCII):

    Torque (Nm) | 45 ────┐  
                |        \  
                |         \  
                |          \  
                |           \  
                |            \  
                |             \  
                |              \  
                |_______________\  
    Power (kW)  |      8 /¯¯\  
                |      /    \  
                |     /      \  
                |____/        \____  
                  600  3.5k  8.5k RPM  
    

    Important Clarifications:

    • Real-World Behavior: Actual torque/power curves may differ due to motor efficiency, load, or control strategies.
    • BSG Usage: The BSG typically operates in the 1,500–5,000 RPM range for engine assist/regen.

    Let me know if you need adjustments! 🚗⚡

  3. User

    Sorry, start at 1000 rpm

  4. Qwen Assistant

    Here’s the Torque & Power Table starting at 1,000 RPM, with 6 key points. This assumes linear torque decay from 45 Nm at 0 RPM to 0 Nm at 8,500 RPM, and calculates power accordingly.


    Torque & Power Table (6 Points)

    RPMTorque (Nm)Power (kW)
    1,00041.84.2
    2,00037.17.2
    3,50026.58.0 (Peak Power)
    5,00018.87.5
    7,0006.34.4
    8,5000.00.0

    Key Calculations:

    1. Torque at any RPM:

      Torque=45×(1−RPM8,500)\text{Torque} = 45 \times \left(1 - \frac{\text{RPM}}{8,500}\right)
      • Example: At 1,000 RPM, torque = 45×(1−1,000/8,500)≈41.8 Nm45 \times (1 - 1,000/8,500) ≈ 41.8 \, \text{Nm}.
    2. Power at any RPM:

      Power (kW)=Torque (Nm)×RPM×π30,000\text{Power (kW)} = \frac{\text{Torque (Nm)} \times \text{RPM} \times \pi}{30,000}
      • Example: At 3,500 RPM, power = 26.5×3,500×π30,000≈8.0 kW\frac{26.5 \times 3,500 \times \pi}{30,000} ≈ 8.0 \, \text{kW}.

    Graph Summary:

    • Torque Curve: Starts at 41.8 Nm (1,000 RPM) and decreases linearly to 0 Nm at 8,500 RPM.
    • Power Curve: Peaks at 8.0 kW (3,500 RPM), then declines as torque drops.

    Visual Representation (ASCII):

    Torque (Nm) | 45 ────┐  
                |        \  
                |         \  
                |          \  
                |           \  
                |            \  
                |             \  
                |              \  
                |_______________\  
    Power (kW)  |      8 /¯¯\  
                |      /    \  
                |     /      \  
                |____/        \____  
                  1k  3.5k  8.5k RPM  
    

    Notes:

    • Peak Power (8 kW) occurs at 3,500 RPM (mid-range of the 8,500 RPM limit).
    • Torque at 1,000 RPM: ~41.8 Nm (slightly less than peak due to linear decay).
    • BSG Usage: The motor operates optimally in the 2,000–5,000 RPM range for engine assist/regen.

    Let me know if you need adjustments! 🚗⚡

  5. User

    Why should the power and nm be at zero at redline?

  6. Qwen Assistant

    Great question! The assumption that power and torque drop to zero at redline (maximum RPM) is based on a simplified linear model of motor behavior, but in reality, this isn’t always the case. Let’s break it down:


    Why Power and Torque Might Be Zero at Redline (Simplified Model)

    In the linear torque decay model we used earlier:

    • Torque decreases linearly from peak (45 Nm at 0 RPM) to 0 Nm at 8,500 RPM (redline).
    • Power (kW) = Torque (Nm) × RPM × (π/30,000).
      • At redline (8,500 RPM), torque is 0 Nm → Power = 0 kW.

    This is a mathematical consequence of the linear assumption. If torque drops to zero at redline, power must also drop to zero, regardless of RPM.


    Why This Might Not Match Real-World Behavior

    1. Electric Motors vs. Internal Combustion Engines (ICE):

      • Electric motors (like the BSG) typically have flat torque curves up to a certain RPM, then torque decreases as RPM increases (due to back-EMF limitations).
      • ICEs often have peak torque at mid-RPM and drop off at very high RPMs.
    2. Redline is a Safety Limit, Not a Performance Limit:

      • Redline (8,500 RPM) is the maximum RPM the motor can safely handle (due to mechanical stress, heat, or cooling limits).
      • At redline, the motor might still produce some torque, but it’s not designed to operate there for long.
    3. Power Peaking Before Redline:

      • In many motors (including electric ones), power peaks at a lower RPM (e.g., 3,500 RPM in our example) and then declines as torque drops.
      • At redline, torque might still be non-zero, but power is lower due to the drop in torque.

    Key Takeaways

    FactorExplanation
    Linear Model AssumptionWe assumed torque decreases linearly to zero at redline for simplicity.
    Real-World BehaviorElectric motors often maintain torque longer, and power peaks before redline.
    Redline PurposeRedline is a safety limit, not necessarily a point of zero torque/power.
    BSG OperationThe BSG (Belt-Driven Starter Generator) is designed for engine assist/regen, not full-power operation at redline.

    Example of Real-World Behavior (Hypothetical)

    If the BSG motor has:

    • Peak torque: 45 Nm at 0–2,000 RPM.
    • Torque drops linearly to 15 Nm at 8,500 RPM.
    • Power peaks at 3,500 RPM (8 kW), then declines gradually.

    At 8,500 RPM:

    • Torque = 15 Nm (not zero).
    • Power = 15 Nm × 8,500 RPM × (π/30,000) ≈ 4.3 kW.

    Conclusion

    The assumption of zero torque/power at redline is a simplified model for illustration. In reality:

    • Torque may not drop to zero at redline.
    • Power may peak earlier and decline gradually.
    • Redline is a safety limit, not a performance endpoint.

    If you have access to the actual torque/power curve for the BMW 48V BSG, that would give a more accurate representation. Let me know if you’d like help interpreting real-world data! 🚗⚡

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.