Skip to content
TheChatArchiveThe Chat Archive
Coherecommand-a-03-2025· CohereHugging Face LMArena Human Preference 140K

/snpe-net-run --container densemotion.ada.quant.dlc --inputlist densemotion.txt…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-3-5-sonnet-20241022’s answer.
  1. User

    /snpe-net-run --container dense_motion.ada.quant.dlc --input_list dense_motion.txt --output_dir "./output" --use_dsp < CANNOT LINK EXECUTABLE "./snpe-net-run": cannot locate symbol "Snpe_SNPEBuilder_NetworkInit" referenced by "/data/local/tmp/tpsmm_dlc_test/snpe-net-run"...

  2. Cohere Assistant

    The error message you're encountering indicates that the snpe-net-run executable is unable to find the symbol Snpe_SNPEBuilder_NetworkInit, which is likely part of the Snapdragon Neural Processing Engine (SNPE) library. This issue can occur due to several reasons, such as missing libraries, incorrect library paths, or incompatible versions of SNPE.

    Here are some steps to troubleshoot and resolve the issue:

    1. Verify SNPE Installation

    • Ensure that SNPE is correctly installed on your device. Check if all the necessary libraries and binaries are present in the expected locations.
    • Verify that the environment variables (e.g., LD_LIBRARY_PATH) are correctly set to include the SNPE library paths.

    2. Check Library Compatibility

    • Ensure that the version of SNPE you are using is compatible with the snpe-net-run executable and the DLC file (dense_motion.ada.quant.dlc).
    • If you’re using a pre-built executable, ensure it matches the SNPE SDK version.

    3. Set LD_LIBRARY_PATH

    • Make sure the LD_LIBRARY_PATH environment variable includes the directory where the SNPE libraries are located. For example:
      export LD_LIBRARY_PATH=/path/to/snpe/lib:$LD_LIBRARY_PATH
      

    4. Rebuild the Executable (if applicable)

    • If you have the source code for snpe-net-run, try rebuilding it with the correct SNPE SDK version. Ensure that the linker is correctly linking against the SNPE libraries.

    5. Check for Missing Libraries

    • Use tools like ldd to check which libraries the snpe-net-run executable depends on and ensure they are all present:
      ldd ./snpe-net-run
      
    • Look for any "not found" entries and ensure those libraries are installed.

    6. Verify DLC File Compatibility

    • Ensure the DLC file (dense_motion.ada.quant.dlc) is compatible with the SNPE version you are using. Some DLC files may require specific SNPE versions.

    7. Check for Multiple SNPE Versions

    • If you have multiple versions of SNPE installed, ensure there is no conflict. Remove or disable older versions if necessary.

    8. Reinstall SNPE

    • If none of the above steps work, consider reinstalling the SNPE SDK to ensure all components are correctly installed.

    Example Command with LD_LIBRARY_PATH

    Here’s an example of how to run the command with the LD_LIBRARY_PATH set:

    export LD_LIBRARY_PATH=/path/to/snpe/lib:$LD_LIBRARY_PATH
    /snpe-net-run --container dense_motion.ada.quant.dlc --input_list dense_motion.txt --output_dir "./output" --use_dsp
    

    If the issue persists, provide more details about your setup (e.g., SNPE version, device, and how you installed SNPE) for further assistance.

  3. User

    Explain me what is Tile operation and why this error is coming: Explain me what is Tile operation and why this error is coming: /snpe-net-run --container dense_motion.ada.quant.dlc --input_list dense_motion.txt --output_dir "./output" --use_dsp < error_code=1002; error_message=Layer parameter value is invalid. No backend could validate Op=/Tile_10 Type=Tile error code=3110; error_component=Model Validation; line_no=142; thread_id=486632137984

  4. Cohere Assistant

    Let's break down the error and the concept of the Tile operation.

    Tile Operation

    In the context of deep learning and neural networks, a Tile operation is used to repeat a tensor (multi-dimensional array) along specified dimensions. It's like creating a mosaic by repeating a smaller tile multiple times.

    Formally, the Tile operation takes an input tensor and two additional parameters:

    • multiples: A 1D tensor specifying how many times to repeat the input tensor along each dimension.
    • padding: (Optional) A 1D tensor specifying the amount of padding to add to the input tensor before tiling.

    For example, if you have a 2x3 tensor and apply a Tile operation with multiples=[2, 3], the output will be a 4x9 tensor, where the original 2x3 tensor is repeated 2 times along the first dimension and 3 times along the second dimension.

    Error Analysis

    The error message you provided indicates a problem with the Tile_10 layer in your model:

    error_code=1002; error_message=Layer parameter value is invalid. No backend could validate Op=/Tile_10 Type=Tile error code=3110; error_component=Model Validation; line_no=142; thread_id=486632137984

    Breaking it down:

    1. error_code=1002: A general error code indicating an invalid layer parameter.
    2. error_message=Layer parameter value is invalid: The parameters provided to the Tile_10 layer are incorrect or incompatible with the SNPE backend.
    3. Op=/Tile_10 Type=Tile: The operation in question is a Tile operation, specifically the Tile_10 layer.
    4. error code=3110: A more specific error code related to model validation.
    5. error_component=Model Validation: The error occurred during the model validation stage, where SNPE checks the model's compatibility with the target hardware.

    Possible Causes

    The error is likely due to one of the following reasons:

    1. Incorrect multiples parameter: The multiples parameter provided to the Tile_10 layer might be invalid (e.g., negative values, incompatible dimensions).
    2. Mismatched data types: The input tensor's data type might not match the expected data type for the Tile operation.
    3. Hardware incompatibility: The Tile operation might not be supported by the target hardware (e.g., DSP) or the SNPE backend.
    4. Model conversion issue: If the model was converted from another framework (e.g., TensorFlow, PyTorch), the conversion process might have introduced errors in the Tile_10 layer.

    Troubleshooting Steps

    1. Inspect the model: Use a tool like Netron (https://netron.app/) to visualize the model and check the parameters of the Tile_10 layer.
    2. Verify multiples parameter: Ensure the multiples parameter is correct and compatible with the input tensor's dimensions.
    3. Check data types: Verify that the input tensor's data type matches the expected data type for the Tile operation.
    4. Test on CPU backend: Try running the model on the CPU backend (--use_cpu) to see if the error persists. If it works on CPU but not on DSP, the issue might be related to hardware compatibility.
    5. Recheck model conversion: If the model was converted from another framework, recheck the conversion process and ensure the Tile operation is correctly translated.
    6. Update SNPE: Ensure you're using the latest version of SNPE, as newer versions might have improved support for Tile operations.

    By following these steps, you should be able to identify and resolve the issue with the Tile_10 layer in your model.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.