Write derivation of wedge slit film from Mumbai University engineering engineering…
- User
Write derivation of wedge slit film from Mumbai University engineering engineering physics 1
- Assistant
Certainly! The "Wedge-Shaped Thin Film" is a classic topic in Engineering Physics (often covered in the first semester of engineering programs such as in Mumbai University). Here's a complete derivation based on the syllabus of Engineering Physics – I under Mumbai University, usually taught under the chapter of Interference of Light or Thin Film Interference.
🌈 Derivation of Fringe Width in a Wedge-Shaped Thin Film
📚 Principle:
The phenomenon is based on interference of light reflected from the top and bottom surfaces of a thin film of air (or another transparent material) of wedge shape, leading to a pattern of parallel dark and bright fringes.
📌 Setup:
A wedge-shaped thin film is formed when two glass plates are placed over each other such that one edge is separated by a small spacer like a thin paper or wire, forming a wedge of air in-between.
Let:
- Angle between the plates (wedge angle) = θ (very small)
- Monochromatic light of wavelength λ is incident normally on the film.
- The air wedge has a linearly increasing thickness from 0 at one end.
💡 Interference Fringes:
Fringes formed are due to interference between the light rays reflected from the top and bottom surfaces of the air wedge. The condition for constructive and destructive interference depends on the path difference and phase change.
✍ Path Difference:
For nearly normal incidence, the path difference between the two reflected rays is:
[ \Delta = 2t ]
However, due to reflection from denser to rarer and vice versa:
- A phase change of π (or λ/2) occurs when light reflects from a denser medium (glass).
- No phase change occurs when reflecting from a rarer medium (air).
So in this setup:
- From air to glass (bottom surface): phase shift of π → path difference λ/2.
Thus, effective path difference:
[ \Delta = 2t + \frac{\lambda}{2} ]
🌑 Condition for Dark Fringe (Destructive Interference):
Destructive interference (dark fringe) occurs when:
[ \Delta = (2t + \frac{\lambda}{2}) = m\lambda ] [ \Rightarrow 2t = (m - \frac{1}{2})\lambda \quad \text{(for m = 1, 2, 3, ...)} ]
🌕 Condition for Bright Fringe (Constructive Interference):
Constructive interference (bright fringe) occurs when:
[ \Delta = (2t + \frac{\lambda}{2}) = (2m + 1)\frac{\lambda}{2} ] [ \Rightarrow 2t = m\lambda \quad \text{(m = 0, 1, 2, 3, ...)} ]
🧮 Expression for Fringe Width:
Let the wedge has a very small angle θ, so at a distance x from the point of zero thickness:
[ t = x \tan\theta \approx x\theta \quad (\text{since } \theta \text{ is very small, in radians}) ]
From the dark fringe condition:
[ 2t = (m - \frac{1}{2}) \lambda \Rightarrow 2x\theta = (m - \frac{1}{2}) \lambda ]
For two successive dark fringes:
Let the position of m-th dark fringe be ( x_m ) and next (m+1)-th dark fringe be at ( x_{m+1} )
Then:
[ 2x_{m} \theta = (m - \frac{1}{2}) \lambda ] [ 2x_{m+1} \theta = (m + \frac{1}{2}) \lambda ]
Subtracting:
[ 2(x_{m+1} - x_m) \theta = \lambda \Rightarrow \boxed{ x_{m+1} - x_m = \frac{\lambda}{2\theta} } ]
✅ Fringe Width:
[ \boxed{ \beta = \frac{\lambda}{2\theta} } ]
Where:
- ( \beta ) is the fringe width (distance between two successive dark fringes),
- ( \lambda ) is the wavelength of incident light,
- ( \theta ) is the wedge angle.
✍ Notes:
- Fringes are straight and parallel to the edge where plates touch.
- The central fringe is always dark due to zero thickness.
- Used in Newton’s Rings, measurement of thickness of thin wires, etc.
📘 Practical Application:
To determine thickness 't' of a thin object (like a wire) placed between the plates:
Let length of air wedge = L
[ \theta \approx \frac{t}{L} ]
So,
[ \beta = \frac{\lambda}{2\theta} = \frac{\lambda L}{2t} \Rightarrow \boxed{ t = \frac{\lambda L}{2\beta} } ]
✅ Final Summary:
Quantity Expression Path difference ( 2t + \frac{\lambda}{2} ) Condition for Dark Fringe ( 2t = (m - \frac{1}{2})\lambda ) Fringe width ( \beta ) ( \frac{\lambda}{2\theta} ) Wedge angle from thickness ( \theta = \frac{t}{L} ) Thickness of object ( t = \frac{\lambda L}{2\beta} )
Let me know if you'd like the same derivation in handwritten/diagrams or formatted for exam notes.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.