Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek-r1-0528· DeepSeekHugging Face LMArena Human Preference 140K

how to install the fingerprint reader for my lenovo t480s notebook?

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Amazon Novaamazon-nova-experimental-chat-05-14’s answer.
  1. User

    how to install the fingerprint reader for my lenovo t480s notebook?

  2. DeepSeek Assistant

    To set up the fingerprint reader on your Lenovo T480s running Linux (Ubuntu/Debian-based distributions), follow these steps:


    1. Verify Hardware Detection

    First, check if your system recognizes the fingerprint sensor:

    lsusb | grep -i fingerprint
    

    You should see output like:

    Bus 001 Device 004: ID 138a:0091 Validity Sensors, Inc. VFS7500 Touch Fingerprint Sensor
    

    (If no output appears, try rebooting or checking BIOS settings for "Fingerprint Reader" enabled under Security > I/O Port Access).


    2. Install Required Packages

    Install the fingerprint authentication software:

    sudo apt update
    sudo apt install fprintd libpam-fprintd
    
    • fprintd: Fingerprint management daemon.
    • libpam-fprintd: PAM module for fingerprint authentication.

    3. Enroll Your Fingerprint

    Run the enrollment tool:

    fprintd-enroll
    

    Follow prompts to scan your fingerprint 5-6 times.
    Tip: Use sudo -i first if you encounter permission errors.


    4. Enable Fingerprint Login

    Integrate fingerprint authentication with system login/sudo:

    sudo pam-auth-update
    
    • Check ☑ Fingerprint authentication
    • Press Enter to confirm.

    5. Test Fingerprint Login

    • Lock your screen (Super+L or Ctrl+Alt+L).
    • Unlock by scanning your fingerprint at the password prompt.
    • Test sudo in the terminal (scan instead of password).

    Troubleshooting

    Driver Issues

    • Ubuntu 22.04+: The default libfprint-2-tod1 driver supports the T480s sensor (Validity 138a:0091).
    • Older Ubuntu (20.04/18.04): Use the community driver:
      sudo add-apt-repository ppa:uunicorn/open-fprintd
      sudo apt update
      sudo apt install open-fprintd fprintd-clients libpam-fprintd
      

    Reset Enrollments

    Delete stored fingerprints and re-enroll:

    sudo rm /var/lib/fprint/*.xbm
    fprintd-enroll
    

    Debugging

    Check service status:

    systemctl status fprintd.service
    

    View debug logs:

    sudo journalctl -u fprintd -f
    

    Notes

    • Windows: Use Lenovo Vantage or download the driver from Lenovo Support.
    • Other Linux Distros:
      • Fedora: sudo dnf install fprintd pam-fprintd
      • Arch: sudo pacman -S fprintd

    Your fingerprint should now work for login, sudo, and lock screens! 🔒

  3. User

    sorry i am using debian 12 and xfce

  4. DeepSeek Assistant

    No problem! Setting up the fingerprint reader on Debian 12 (Bookworm) with XFCE is straightforward. Here's the updated guide:


    Step-by-Step Guide for Debian 12 + XFCE

    1. Verify Fingerprint Hardware

    Check if your sensor is detected (T480s usually uses 138a:0091 Validity sensor):

    lsusb | grep -i fingerprint
    

    Expected output:

    Bus 001 Device 004: ID 138a:0091 Validity Sensors, Inc.
    

    2. Install Required Packages

    sudo apt update
    sudo apt install fprintd libpam-fprintd
    

    3. Enroll Your Fingerprint

    fprintd-enroll
    
    • Follow prompts: Scan the same finger 5-6 times until enrollment completes.
    • Troubleshoot permission errors:
      sudo fprintd-enroll $(whoami)
      

    4. Enable Fingerprint in Authentication

    sudo pam-auth-update
    
    • Enable fingerprint: Check [X] Fingerprint authentication
    • Press Tab → Enter to confirm.

    5. Configure XFCE LightDM Login (Crucial for Debian+XFCE)

    Create/edit the LightDM config:

    sudo nano /etc/lightdm/lightdm.conf
    

    Add these lines under [Seat:*]:

    greeter-show-manual-login = true
    greeter-hide-users = false
    

    6. Apply Changes

    Restart services:

    sudo systemctl restart lightdm fprintd
    

    Testing & Usage

    • Lock screen: Press Super+L (Windows key + L) or use XFCE menu → Lock
    • Unlock: At the password prompt, swipe your finger!
    • Terminal test: Run sudo -i and swipe to authenticate.

    Troubleshooting for Debian 12

    If fprintd-enroll fails:

    1. Check sensor support:

      fprintd-list | grep -i 138a
      

      (Should show found device claimed by <driver>)

    2. Install latest drivers (if default doesn't work):

      sudo apt install libfprint-2-tod1 libfprint-2-tod1-goodix
      
    3. Reset enrollments:

      sudo rm /var/lib/fprint/$(whoami)/*.xbm
      fprintd-enroll
      

    If LightDM doesn't show fingerprint prompt:

    • Install the graphical greeter:
      sudo apt install lightdm-gtk-greeter
      
    • Reconfigure LightDM:
      sudo dpkg-reconfigure lightdm
      
      (Select lightdm-gtk-greeter as default)

    Notes

    • XFCE Power Manager: Disable automatic screen locking in Settings → Power Manager → Security to avoid conflicts.
    • Windows Hello Alternative: For better integration, consider installing howdy (face recognition) alongside fingerprint:
      sudo apt install howdy
      
    • Driver Sources: Debian 12 includes updated libfprint (v1.94) which supports Validity 138a:0091 natively.

    Your fingerprint should now work for:

    • Login screen (LightDM)
    • Screen unlocking
    • sudo commands
    • Polkit authentication (e.g., software installs)

    If issues persist, check journal logs:

    journalctl -u fprintd -b --no-pager | grep -i error
    
  5. User

    on fprintd enroll I have Impossible to enroll: GDBus.Error:net.reactivated.Fprint.Error.NoSuchDevice: No devices available

  6. DeepSeek Assistant

    Let's troubleshoot the "No devices available" error for your fingerprint reader on Debian 12. This is usually caused by driver or hardware recognition issues. Here's how to fix it:

    Step-by-Step Solution:

    1. Confirm your fingerprint sensor model:
    lsusb | grep -i fingerprint
    

    For T480s, you should see:

    Bus 001 Device 00X: ID 138a:0091 Validity Sensors, Inc. VFS7500 Touch Fingerprint Sensor
    
    1. Install updated drivers (critical for Validity sensors):
    sudo apt update
    sudo apt install libfprint-2-tod1 libfprint-2-tod1-goodix fprintd
    
    1. Load kernel modules manually:
    sudo modprobe vfs0090
    sudo modprobe goodix
    
    1. Check device recognition:
    fprintd-list
    

    You should see output like:

    found 1 devices
    Device at /net/reactivated/Fprint/Device/0
     - driver: synaptics (goodix-tod)
     - device: 138a:0091
    
    1. Create udev rules file:
    sudo nano /etc/udev/rules.d/90-fprint.rules
    

    Add these lines:

    # Validity Sensors
    SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0091", MODE="0666", GROUP="plugdev"
    
    # Goodix Sensors
    SUBSYSTEM=="usb", ATTRS{idVendor}=="27c6", MODE="0666", GROUP="plugdev"
    

    Reload rules:

    sudo udevadm control --reload-rules
    sudo udevadm trigger
    
    1. Add your user to necessary groups:
    sudo usermod -aG plugdev,video,input $(whoami)
    
    1. Restart services:
    sudo systemctl restart fprintd
    sudo systemctl restart lightdm  # or reboot later
    
    1. Try enrolling again:
    fprintd-enroll
    

    If still failing, try with sudo:

    sudo fprintd-enroll $(whoami)
    

    If still not working - Advanced Fixes:

    1. Manual driver override:

    sudo -i
    echo 'options vfs0090 force=1' > /etc/modprobe.d/vfs0090.conf
    update-initramfs -u
    reboot
    

    2. Build latest libfprint (if above fails):

    # Install dependencies
    sudo apt install build-essential meson libnss3-dev libglib2.0-dev libusb-1.0-0-dev
    
    # Build from source
    git clone https://gitlab.freedesktop.org/libfprint/libfprint
    cd libfprint
    meson build --prefix=/usr
    ninja -C build
    sudo ninja -C build install
    sudo ldconfig
    
    # Re-enroll
    fprintd-enroll
    

    3. Check kernel support:

    dmesg | grep -i fingerprint
    

    Look for errors like:

    vfs0090: probe of 001:004 failed with error -22
    

    If found, update your kernel:

    sudo apt install -t bookworm-backports linux-image-amd64
    

    Final Checks:

    1. Verify BIOS settings:

      • Reboot → Enter BIOS (F1)
      • Security → I/O Port Access → Fingerprint Reader: Enabled
      • Security Chip: Activated
    2. Test with live USB:

      • Try Ubuntu 22.04 live USB to confirm hardware works
    3. Alternative tools:

    sudo apt install python3-validity
    sudo validity-sensors-tools enroll
    

    If all else fails, your options are:

    1. Use Windows driver via VirtualBox USB passthrough
    2. Disable fingerprint reader in BIOS to save power
    3. Consider physical hardware reset (remove battery/CMOS for 60s)

    The T480s fingerprint reader (138a:0091) has partial Linux support and may require these specific tweaks. Let me know your lsusb output if still stuck!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.