Give me a cheat sheet for electrnoic components
- User
Give me a cheat sheet for electrnoic components
Assistant
Electronic Components Cheat Sheet
Passive Components
Resistors
- Symbol: ⟝⟞ (zigzag line)
- Function: Limit current, divide voltage
- Unit: Ohms (Ω)
- Key Parameters:
- Resistance value
- Power rating (⅛W, ¼W, ½W, 1W, etc.)
- Tolerance (±1%, ±5%, etc.)
- Types: Carbon film, metal film, wirewound, SMD (0805, 0603, 0402)
- Color Code: Black(0), Brown(1), Red(2), Orange(3), Yellow(4), Green(5), Blue(6), Violet(7), Grey(8), White(9)
Capacitors
- Symbol: ⊥⊥ or −|(− (polarized)
- Function: Store charge, filter signals, block DC/pass AC
- Unit: Farads (F, μF, nF, pF)
- Key Parameters:
- Capacitance
- Voltage rating (WVDC)
- Tolerance
- ESR (Equivalent Series Resistance)
- Types: Ceramic, electrolytic, tantalum, film, mica, SMD
- Note: Electrolytic and tantalum are polarized (+/- matters!)
Inductors
- Symbol: ∞∞∞ (coil)
- Function: Store energy in magnetic field, resist current changes
- Unit: Henrys (H, mH, μH)
- Key Parameters:
- Inductance
- Current rating
- Saturation current
- DCR (DC Resistance)
- Types: Air core, iron core, ferrite core, toroidal
Semiconductors
Diodes
- Symbol: |▷|
- Function: Allow current in one direction only
- Key Parameters:
- Forward voltage drop (Vf)
- Maximum current (If)
- Reverse voltage (Vr)
- Recovery time
- Types:
- Signal (1N4148)
- Rectifier (1N4001-1N4007)
- Schottky (lower Vf, faster)
- Zener (voltage reference)
- LED (Light Emitting Diode)
Transistors
- BJT Symbol: NPN (▷|) or PNP (|◁)
- MOSFET Symbol: N-Channel (⊣⊢) or P-Channel (⊣⊢)
- Function: Amplify signals or switch current
- Key Parameters:
- BJT: hFE (gain), Ic (collector current)
- MOSFET: Vgs(th), Rds(on), max current
- Types:
- BJT: NPN, PNP
- MOSFET: N-channel, P-channel
- Common: 2N2222, BC547, 2N3904 (BJT); IRF540, BS170 (MOSFET)
Integrated Circuits (ICs)
- Symbol: Rectangle with pins
- Function: Complex circuits in one package
- Types:
- Microcontrollers (Arduino, ESP32, ATmega328)
- Op-Amps (LM741, LM358, TL072)
- Voltage Regulators (7805, LM317, LM1117)
- Logic Gates (74HC series)
- Power Management ICs
- ADCs/DACs
- Packages: DIP, SOIC, QFP, QFN, BGA, SOT23
Electromechanical Components
Switches
- Symbol: Various, often ○╱○
- Types:
- Toggle (SPST, SPDT, DPDT)
- Pushbutton (momentary, latching)
- DIP switches
- Rotary switches
- Slide switches
- Ratings: Voltage, current, cycle life
Relays
- Symbol: Coil with switch
- Function: Electrically controlled switch
- Parameters:
- Coil voltage
- Contact ratings (current/voltage)
- Switching time
- Types: Electromechanical, solid state, reed
Connectors
- Types:
- Headers (2.54mm/0.1")
- Terminal blocks
- JST connectors
- USB, HDMI, etc.
- Audio jacks
- DC power jacks
- Parameters: Pin count, current rating, pitch
Power Components
Transformers
- Symbol: Two coils with lines between
- Function: Change AC voltage levels, isolation
- Parameters:
- Input/output voltages
- Power rating (VA)
- Current rating
Voltage Regulators
- Symbol: Rectangle with pins
- Function: Maintain stable output voltage
- Types:
- Linear (7805, LM317)
- Switching (buck, boost, buck-boost)
- Parameters: Input range, output voltage, current rating
Fuses
- Symbol: ─○─○─
- Function: Protect circuits from overcurrent
- Parameters: Current rating, voltage rating, breaking capacity, speed (fast/slow blow)
Sensors & Transducers
Temperature Sensors
- Types: Thermistor, thermocouple, RTD, digital (DS18B20)
- Output: Resistance change, voltage, or digital
Light Sensors
- Types: Photoresistor (LDR), photodiode, phototransistor, ambient light sensors
- Output: Resistance change or current
Motion & Position Sensors
- Types: Potentiometer, encoder, accelerometer, gyroscope, Hall effect, ultrasonic
- Output: Analog voltage, resistance, or digital
Sound Transducers
- Types: Microphone, speaker, buzzer, piezo
- Function: Convert electrical energy to sound or vice versa
Display Components
LEDs
- Symbol: ◁|▷ with arrows
- Parameters: Forward voltage (1.8-3.3V), current (usually 20mA), color
- Types: Standard, RGB, high-brightness, infrared
LCD Displays
- Types:
- Character LCD (16×2, 20×4)
- Graphic LCD
- TFT LCD
- Interfaces: Parallel, I²C, SPI
OLED Displays
- Types: Monochrome, color
- Interfaces: I²C, SPI
- Advantages: Self-illuminating, high contrast
Common Values/Standards
Resistors (E12 series)
10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82 (and multiples of 10)
Capacitors (common values)
- Decoupling: 0.1μF, 1μF
- Power supply filtering: 10μF, 100μF, 1000μF
- Timing: 1nF, 10nF, 100nF
Voltage standards
- Logic: 3.3V, 5V
- Power: 12V, 24V
- Battery: 1.5V, 3.7V, 9V
Would you like me to explain or break down any particular component in more detail?
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.