Skip to content
TheChatArchiveThe Chat Archive
Googlegemma-3n-e4b-it· GoogleHugging Face LMArena Human Preference 140K

pRZETŁUMACZ NA ANGIELSKI Podsumowując: -Została zaktualizowana nazwa punktów po stronie…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with gpt-4.1-2025-04-14’s answer.
  1. User

    pRZETŁUMACZ NA ANGIELSKI

    Podsumowując: -Została zaktualizowana nazwa punktów po stronie lewej - dotyczy tylko wizualizacji, punkty same w sobie poprawnie odzwierciedlają pozycję pomiaru z rysunku -MP8-A ma dużą precyzję(Cp), ale małą dokładność (Cpk) co sugeruje o potrzebie wycentrowania procesu (co może być specyficzne z powodu długości krawędzi od słupka B do słupka C) -Na koniec: Rezultaty nie mówią o tym czy sufit jest dłuższy lub krótszy (Water Jet wycina tylko materiał dookoła - struktura jest wycięta przez operatrów na procesie formowania), wskazują nam odchylenie od swojego idealnego kształtu powierzchni, więc albo sufit został złamany lub doszło do deformacji

    Czy mogę jeszcze pomóc ?

  2. Google Assistant

    Here's the translation to English:

    Summary:

    • The point names on the left side have been updated – this applies only to the visualization; the points themselves accurately reflect the measurement position from the drawing.
    • MP8-A has high precision (Cp) but low capability (Cpk), suggesting a need to center the process (which may be specific due to the length of the edge from column B to column C).
    • In conclusion: The results do not indicate whether the ceiling is longer or shorter. The Water Jet only cuts the material around the perimeter – the structure is cut by operators during the forming process. They indicate a deviation from its ideal surface shape, so either the ceiling was broken or a deformation occurred.

    Can I help you with anything else?

    Key Term Notes:

    • Zaktualizowana nazwa punktów: The point names have been updated.
    • Dotyczy tylko wizualizacji: This applies only to the visualization.
    • Duża precyzja (Cp): High precision (Cp).
    • Mała dokładność (Cpk): Low capability (Cpk).
    • Potrzebne wycentrowanie procesu: A need to center the process.
    • Specyficzne z powodu długości krawędzi: Specific due to the length of the edge.
    • Rezultaty nie mówią o tym czy sufit jest dłuższy lub krótszy: The results do not indicate whether the ceiling is longer or shorter.
    • Water Jet wycina tylko materiał dookoła: The Water Jet only cuts the material around the perimeter.
    • Struktura jest wycięta przez operatorów na procesie formowania: The structure is cut by operators during the forming process.
    • Odchylenie od swojego idealnego kształtu powierzchni: A deviation from its ideal surface shape.
    • Sufit został złamany lub doszło do deformacji: The ceiling was broken or a deformation occurred.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.