Skip to content
The Chat Archive
claude-opus-4-20250514· Anthropic LMArena Human Preference 140K

can I connect using ssh to a local area network computer using tails?

  1. User

    can I connect using ssh to a local area network computer using tails?

  2. Assistant

    Yes, you can use SSH to connect to computers on your local area network (LAN) from Tails. SSH is included in Tails by default and works normally for local network connections. Here's what you need to know:

    How to Use SSH in Tails

    Basic SSH Connection

    Open a terminal in Tails and use the standard SSH command:

    ssh username@192.168.1.100
    

    Replace username with your actual username and the IP address with your target computer's LAN IP.

    Finding LAN IP Addresses

    To discover devices on your local network:

    ip addr show        # Check your own IP and network interface
    ip route           # See your network configuration
    nmap -sn 192.168.1.0/24  # Scan for devices (if nmap is available)
    

    Important Considerations

    1. Local Network Traffic Only

    • SSH connections to LAN addresses (192.168.x.x, 10.x.x.x, 172.16-31.x.x) go directly through your local network
    • These connections do NOT go through Tor
    • Your real IP address is visible to the LAN computer you're connecting to

    2. No Internet SSH Through Tor

    • By default, Tails blocks SSH connections to internet addresses through Tor
    • This is because SSH over Tor can compromise anonymity (timing attacks, session correlation)
    • If you absolutely need SSH over Tor, you'd need to use workarounds like torsocks or torify, but this is discouraged

    3. Persistence Considerations

    • SSH keys and known_hosts file are not saved between Tails sessions unless you enable persistence
    • You'll need to accept host keys each time you boot Tails
    • Consider setting up persistence if you regularly SSH to the same LAN computers

    4. Security Notes

    • LAN SSH connections reveal that you're using Tails/Linux to other computers on your network
    • The SSH traffic itself is encrypted, but metadata (who's connecting to whom) is visible on the LAN
    • Make sure you trust your local network environment

    Common Use Cases

    SSH in Tails is commonly used for:

    • Accessing a home server or NAS
    • Managing routers or network devices
    • Transferring files securely within your LAN
    • Remote administration of local machines

    Would you like specific help with setting up SSH keys in Tails or configuring persistence for SSH?

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.