Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-pro-preview-05-06· GoogleHugging Face LMArena Human Preference 140K

After update request my render deploy doesn't started so i pulled previous deploy status…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-pro’s answer.
  1. User

    After update request my render deploy doesn't started so i pulled previous deploy status and failed

  2. Gemini Assistant

    You've hit on a common and tricky timing issue with APIs like this!

    When you send the PATCH request to update the imagePath, Render starts a new deployment process. However, this new deployment record might not be created in their system instantaneously. If your script immediately queries /deploys?limit=1, it's very possible it's fetching the metadata for the previous, already existing deployment, especially if that one was live.

    Here's how to make it more robust:

    1. Record Time Before Patch: Get the current timestamp before you send the PATCH request.
    2. Patch the Service: Send the PATCH request to update the image.
    3. Poll for the New Deployment:
      • Repeatedly fetch the latest deployment (/deploys?limit=1).
      • Check its createdAt timestamp. If this timestamp is later than the time you recorded in step 1, OR if its status is clearly an "in-progress" state (like created, build_in_progress, update_in_progress), then you've likely found your new deployment.
      • If the latest deploy is still showing live and its createdAt is before your patch time, you're still seeing the old one. Wait and try again.
      • Include a timeout for this "find new deploy" loop.
    4. Monitor the New Deployment: Once you've confidently identified the ID of the new deployment, then you can start polling its status until it's live or fails.

    Here's the updated GitHub Actions workflow incorporating this more robust logic:

    name: Build, Push & Deploy to Render
    
    on:
      workflow_dispatch: # Manual trigger only
    
    jobs:
      build-and-deploy:
        runs-on: ubuntu-latest
    
        steps:
          - name: Checkout code
            uses: actions/checkout@v3
    
          # --- 1. Build and Push Docker Image to GHCR ---
          - name: Log in to GitHub Container Registry
            uses: docker/login-action@v2
            with:
              registry: ghcr.io
              username: ${{ github.actor }}
              password: ${{ secrets.GHCR_TOKEN }}
    
          - name: Build and push Docker image
            id: build_image # Give this step an ID to access its outputs if needed
            uses: docker/build-push-action@v4
            with:
              context: .
              push: true
              tags: ghcr.io/${{ github.repository }}:${{ github.sha }}
    
          # --- 2. Deploy to Render ---
          - name: Deploy to Render and Poll for Success
            env:
              RENDER_API_KEY: ${{ secrets.RENDER_API_KEY }}
              RENDER_SERVICE_ID: ${{ secrets.RENDER_SERVICE_ID }}
              IMAGE_PATH: ghcr.io/${{ github.repository }}:${{ github.sha }}
            run: |
              echo "Updating Render service ($RENDER_SERVICE_ID) to use image: $IMAGE_PATH"
    
              # Record time before sending the PATCH request (in seconds since epoch)
              BEFORE_PATCH_EPOCH=$(date +%s)
    
              # Step 2a: Update the service to point to the new image, triggering a deploy
              PATCH_RESPONSE_CODE=$(curl --write-out "%{http_code}" --silent --output /dev/null \
                --request PATCH \
                --url https://api.render.com/v1/services/$RENDER_SERVICE_ID \
                --header "Authorization: Bearer $RENDER_API_KEY" \
                --header 'Content-Type: application/json' \
                --data '{
                  "serviceDetails": {
                    "image": {
                      "path": "'"$IMAGE_PATH"'"
                    }
                  }
                }')
    
              if [ "$PATCH_RESPONSE_CODE" -ne 200 ] && [ "$PATCH_RESPONSE_CODE" -ne 202 ]; then
                echo "Error: PATCH request to update service failed with HTTP status $PATCH_RESPONSE_CODE."
                # Optionally, you can try to get error details from Render here if the API provides them
                exit 1
              fi
              echo "Service update request sent (HTTP $PATCH_RESPONSE_CODE). Waiting for new deployment to appear..."
    
              # Step 2b: Find the ID of the NEW deployment triggered by the PATCH
              NEW_DEPLOY_ID=""
              FIND_DEPLOY_TIMEOUT=300 # 5 minutes to find the new deploy
              FIND_DEPLOY_START_TIME=$(date +%s)
    
              echo "Looking for a new deployment created after epoch $BEFORE_PATCH_EPOCH..."
    
              while true; do
                CURRENT_FIND_TIME=$(date +%s)
                ELAPSED_FIND_TIME=$((CURRENT_FIND_TIME - FIND_DEPLOY_START_TIME))
    
                if [ $ELAPSED_FIND_TIME -gt $FIND_DEPLOY_TIMEOUT ]; then
                  echo "Timeout: Could not find a new deployment within $FIND_DEPLOY_TIMEOUT seconds."
                  exit 1
                fi
    
                # Fetch the latest deployment details
                LATEST_DEPLOY_JSON=$(curl -s --request GET \
                  --url "https://api.render.com/v1/services/$RENDER_SERVICE_ID/deploys?limit=1" \
                  --header "Authorization: Bearer $RENDER_API_KEY")
    
                # Check if jq successfully parsed JSON and found a deploy
                if ! echo "$LATEST_DEPLOY_JSON" | jq -e '.[0].deploy.id' > /dev/null; then
                    echo "Warning: Could not parse latest deployment JSON or no deployments found yet. Retrying..."
                    sleep 10
                    continue
                fi
    
                CANDIDATE_ID=$(echo "$LATEST_DEPLOY_JSON" | jq -r '.[0].deploy.id')
                CANDIDATE_STATUS=$(echo "$LATEST_DEPLOY_JSON" | jq -r '.[0].deploy.status')
                CANDIDATE_CREATED_AT_ISO=$(echo "$LATEST_DEPLOY_JSON" | jq -r '.[0].deploy.createdAt') # e.g., 2023-10-27T10:00:00Z
    
                # Convert ISO 8601 to epoch seconds (GNU date needed)
                CANDIDATE_CREATED_AT_EPOCH=$(date -d "$CANDIDATE_CREATED_AT_ISO" +%s)
    
                echo "Found candidate deploy: ID=$CANDIDATE_ID, Status=$CANDIDATE_STATUS, CreatedAt=$CANDIDATE_CREATED_AT_ISO (Epoch: $CANDIDATE_CREATED_AT_EPOCH)"
    
                # Heuristic: If a deploy is already 'live', it's probably the old one unless created *after* our patch.
                # The most reliable is checking createdAt OR if the status is clearly an in-progress one.
                if [[ "$CANDIDATE_CREATED_AT_EPOCH" -gt "$BEFORE_PATCH_EPOCH" ]] || \
                   [[ "$CANDIDATE_STATUS" == "created" || \
                      "$CANDIDATE_STATUS" == "build_in_progress" || \
                      "$CANDIDATE_STATUS" == "update_in_progress" || \
                      "$CANDIDATE_STATUS" == "pre_deploy_in_progress" ]]; then
                  NEW_DEPLOY_ID="$CANDIDATE_ID"
                  echo "Confirmed new deployment: ID=$NEW_DEPLOY_ID, Status=$CANDIDATE_STATUS"
                  break
                else
                  echo "This deploy ($CANDIDATE_ID) seems to be an old one (created at $CANDIDATE_CREATED_AT_EPOCH vs patch time $BEFORE_PATCH_EPOCH, status $CANDIDATE_STATUS). Waiting..."
                fi
                
                sleep 15 # Wait before checking again
              done
    
              if [ -z "$NEW_DEPLOY_ID" ]; then
                echo "Critical Error: Failed to identify the new deployment ID after PATCH."
                exit 1
              fi
    
              echo "Monitoring new deployment ID: $NEW_DEPLOY_ID"
    
              # Step 2c: Poll the NEW deployment's status until it's 'live' or fails
              MONITOR_TIMEOUT=1800 # 30 minutes
              MONITOR_START_TIME=$(date +%s)
    
              while true; do
                CURRENT_MONITOR_TIME=$(date +%s)
                ELAPSED_MONITOR_TIME=$((CURRENT_MONITOR_TIME - MONITOR_START_TIME))
    
                if [ $ELAPSED_MONITOR_TIME -gt $MONITOR_TIMEOUT ]; then
                  echo "Timeout reached while waiting for deployment $NEW_DEPLOY_ID to complete."
                  exit 1
                fi
    
                DEPLOY_INFO=$(curl -s \
                  "https://api.render.com/v1/services/$RENDER_SERVICE_ID/deploys/$NEW_DEPLOY_ID" \
                  -H "Authorization: Bearer $RENDER_API_KEY")
    
                DEPLOY_STATUS=$(echo $DEPLOY_INFO | jq -r '.status // "unknown"')
    
                echo "Deployment $NEW_DEPLOY_ID status: $DEPLOY_STATUS (elapsed time: ${ELAPSED_MONITOR_TIME}s)"
    
                if [ "$DEPLOY_STATUS" = "live" ]; then
                  echo "Deployment $NEW_DEPLOY_ID successful!"
                  break
                elif [ "$DEPLOY_STATUS" = "build_failed" ] || [ "$DEPLOY_STATUS" = "update_failed" ] || [ "$DEPLOY_STATUS" = "canceled" ] || [ "$DEPLOY_STATUS" = "pre_deploy_failed" ] || [ "$DEPLOY_STATUS" = "deploy_failed" ]; then
                  echo "Deployment $NEW_DEPLOY_ID failed with status: $DEPLOY_STATUS"
                  # You might want to fetch logs here if the API allows
                  # curl "https://api.render.com/v1/services/$RENDER_SERVICE_ID/deploys/$NEW_DEPLOY_ID/logs" ...
                  exit 1
                elif [ "$DEPLOY_STATUS" = "unknown" ]; then
                    echo "Warning: Could not determine deployment status for $NEW_DEPLOY_ID. Response: $DEPLOY_INFO"
                fi
    
                sleep 30
              done
    

    Key changes in the "Deploy to Render" step:

    1. BEFORE_PATCH_EPOCH=$(date +%s): Records the time before the PATCH.
    2. Improved PATCH error handling: Checks the HTTP status code of the PATCH request.
    3. Loop to Find New Deploy ID:
      • It loops for up to FIND_DEPLOY_TIMEOUT (default 5 minutes).
      • Fetches the latest deploy (limit=1).
      • Extracts its id, status, and createdAt timestamp.
      • Converts createdAt (which is ISO 8601) to seconds since epoch using date -d "$CANDIDATE_CREATED_AT_ISO" +%s. This requires GNU date; most GitHub runners have it.
      • Crucial Logic: It considers a deployment "new" if:
        • Its CANDIDATE_CREATED_AT_EPOCH is greater than BEFORE_PATCH_EPOCH.
        • OR its CANDIDATE_STATUS is one of the typical "in-progress" states (created, build_in_progress, update_in_progress, pre_deploy_in_progress). This helps catch cases where the clock sync might be slightly off or the deploy is created very quickly.
      • If it doesn't find a suitable new deploy, it sleeps and retries.
    4. Error if New Deploy Not Found: Exits if it can't identify the new deploy within the timeout.
    5. Polling uses NEW_DEPLOY_ID: The subsequent monitoring loop correctly uses the identified NEW_DEPLOY_ID.
    6. More specific failure statuses: Added deploy_failed to the list of terminal failure states.

    This approach significantly increases the reliability of picking up the correct deployment after the service update.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.