I have a bike with a shimano RS510 50x34 in front and a 105 11s 12-32 in the back. What…
- User
I have a bike with a shimano RS510 50x34 in front and a 105 11s 12-32 in the back. What would be different with a SRAM RIVAL AXS 38 in the front and a SRAM RIVAL 10-44 12 in the back?
Assistant
Okay, let's break down the differences between your current Shimano setup and the proposed SRAM Rival AXS setup. This is a significant change, going from mechanical shifting to electronic wireless, and also altering gearing. Here's a detailed comparison, covering gearing, shifting, feel, and potential considerations:
1. Gearing - The Biggest Change
- Your Current Shimano (50/34 x 12-32):
- Range: This gives you a wide range. The 50/34 provides a good high-end for speed on flats and downhills, and the 34/32 combination offers a relatively low gear for climbing.
- Gear Steps: 11-speed cassettes have smaller jumps between gears than 12-speed. This can feel smoother to some riders, especially when fine-tuning cadence.
- Overall Ratio Spread: Approximately 380% (50/12 divided by 34/32).
- SRAM Rival AXS (38T x 10-44):
- Range: This is a 1x (single chainring) setup. It's designed for simplicity and weight savings.
- Gear Steps: 12-speed cassettes have smaller jumps between gears than 11-speed.
- Overall Ratio Spread: Approximately 440% (38/10 divided by 38/44).
- Key Differences:
- No Front Derailleur: The biggest change. You'll only have one chainring.
- Larger Cassette: The 10-44 cassette has a significantly larger range than your 12-32. The 44t cog will give you a much easier climbing gear.
- Smaller Chainring: The 38t chainring is smaller than your current smallest chainring (34t). This means you'll spin a bit more at higher speeds.
- Fewer Cross-Chain Combinations: With a 1x setup, you avoid the potential for inefficient or noisy cross-chaining (big chainring/big cog or small chainring/small cog).
2. Shifting - A World of Difference
- Shimano 105 Mechanical:
- Cable-Actuated: Shifting is done via cables and mechanical levers.
- Positive Feel: Shimano is known for its precise and reliable mechanical shifting.
- Maintenance: Requires regular cable adjustments and replacement.
- SRAM Rival AXS Electronic Wireless:
- Electronic & Wireless: Shifting is done electronically via buttons on the levers, communicating wirelessly to the rear derailleur.
- Effortless Shifting: AXS shifting is incredibly smooth, fast, and requires very little effort.
- Customization: You can customize button functions through the SRAM AXS app.
- Auto-Trim: The rear derailleur automatically adjusts to prevent chain rub.
- Battery Powered: Requires charging the derailleurs and shifters. Battery life is generally good (many rides between charges).
- Pairing: Initial setup involves pairing the components.
- Maintenance: Less frequent adjustments needed, but you're dealing with electronics and batteries.
3. Feel & Riding Experience
- Shimano: Traditional feel, reliable, and predictable. You're actively pulling a cable to shift.
- SRAM AXS: More modern and refined. The electronic shifting feels very intuitive and effortless. The 1x setup simplifies things, removing the need to worry about front derailleur shifts. The wider range of the 10-44 cassette will make climbing easier. You'll likely find yourself using the rear derailleur more frequently to adjust to terrain.
4. Pros and Cons of the SRAM Rival AXS Change
Feature Shimano RS510/105 (Current) SRAM Rival AXS (Proposed) Shifting Mechanical, Cable Electronic, Wireless Gearing 2x11 (50/34, 12-32) 1x12 (38T, 10-44) Weight Heavier Lighter Complexity More complex (2 derailleurs) Simpler (1 derailleur) Maintenance More frequent adjustments Less frequent adjustments Cost Lower Higher Climbing Good Excellent High Speed Excellent Good Simplicity Moderate High Customization Limited Extensive (via AXS app) 5. Things to Consider Before Switching
- Cost: SRAM Rival AXS is significantly more expensive than Shimano 105. You'll need to factor in the cost of the crankset, rear derailleur, shifters, cassette, chain, and potentially a new wheel if your current wheel doesn't accept an HG freehub body.
- Riding Style: 1x drivetrains are popular with riders who prioritize simplicity and climbing ability. If you frequently ride on very flat terrain at high speeds, you might miss the extra gearing of a 2x setup.
- Cadence: The smaller chainring (38t) will require you to spin a higher cadence to maintain the same speed as your current setup. Make sure you're comfortable with this.
- Freehub Body: SRAM XDR/XD cassettes require a specific freehub body on your rear wheel. Check if your wheel is compatible. Some wheels can be converted with a freehub body swap.
- Chainline: Proper chainline is crucial for a 1x setup. Make sure the crankset and cassette are compatible to minimize chain rub and noise.
- Learning Curve: While AXS is intuitive, there's a slight learning curve to get used to the electronic shifting and button layout.
In conclusion:
The SRAM Rival AXS setup offers a compelling upgrade in terms of shifting performance, simplicity, and climbing ability. However, it's a significant investment and a change in riding feel. Carefully consider your riding style, budget, and the points above before making the switch. If you prioritize effortless shifting, a wider gear range for climbing, and a cleaner look, the SRAM Rival AXS is a great option. If you're happy with your current Shimano setup and don't want to spend the money, there's no need to change.
- Your Current Shimano (50/34 x 12-32):
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.