Skip to content
TheChatArchiveThe Chat Archive
gpt-4.1-2025-04-14· OpenAIHugging Face LMArena Human Preference 140K

How to prepare 5 M sodium hydroxide solution

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with MiniMaxminimax-m1’s answer.
  1. User

    How to prepare 5 M sodium hydroxide solution

  2. Assistant

    To prepare a 5 M (molar) sodium hydroxide (NaOH) solution, follow these steps:


    Materials Needed:

    • Sodium hydroxide pellets (NaOH)
    • Distilled or deionized water
    • Volumetric flask or graduated cylinder (1 L capacity for 1 L solution)
    • Glass stirring rod or magnetic stirrer
    • Protective gear (gloves, goggles, lab coat)

    Calculations:

    Molarity (M) = moles of solute / liters of solution

    • Molecular weight of NaOH: 40.00 g/mol
    • To make 1 L of 5 M NaOH:
      • Moles needed = 5 moles
      • Mass needed = 5 moles × 40.00 g/mol = 200 g

    Procedure:

    1. Safety First:

      • Wear gloves, goggles, and a lab coat.
      • Work in a well-ventilated area or fume hood.
      • NaOH is caustic and can cause burns.
    2. Dissolving NaOH:

      • Measure ~500 mL of distilled water in a beaker.
      • Slowly add 200 g of NaOH pellets to the water (never add water to NaOH, always add NaOH to water).
      • Stir continuously. The solution will heat up as NaOH dissolves (exothermic reaction).
    3. Diluting to Final Volume:

      • After the NaOH is completely dissolved and the solution has cooled to room temperature, transfer it to a 1 L volumetric flask.
      • Rinse the beaker with distilled water and add the rinsings to the flask.
      • Add distilled water to the flask until the total volume is exactly 1 L.
    4. Mix Well:

      • Cap and invert the flask several times to ensure thorough mixing.

    Storage:

    • Store the solution in a tightly closed, labeled plastic or glass bottle.
    • NaOH solutions absorb CO₂ from air, so keep the container tightly sealed.

    Summary Table:

    Final VolumeNaOH NeededWater (initial)
    1 L200 g~500 mL
    500 mL100 g~250 mL
    100 mL20 g~50 mL

    Note:

    • Always add NaOH to water, not the other way around, to avoid splattering.
    • The solution is highly caustic; handle with care.

    If you need a different volume, adjust the amounts proportionally. Let me know if you need calculations for a different volume!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.