Skip to content
The Chat Archive
claude-3-7-sonnet-20250219-thinking-32k· Anthropic LMArena Human Preference 140K

what is the maximum power in milliwatts for a class 1 laser that operates continuous…

  1. User

    what is the maximum power in milliwatts for a class 1 laser that operates continuous wave at 635nm?

  2. Assistant

    The maximum power for a Class 1 laser operating in continuous wave mode at 635nm is approximately 0.39 milliwatts (or 390 microwatts).

    Class 1 lasers are considered inherently safe under all normal use conditions, with their emission limits set to prevent eye damage even with prolonged direct exposure. The specific power limit varies by wavelength, and for red lasers at 635nm, the accessible emission limit (AEL) is set at this level according to standards like IEC 60825-1.

  3. User

    What about for 655nm?

  4. Assistant

    For a Class 1 laser operating in continuous wave mode at 655nm, the maximum power is approximately 0.41 milliwatts (410 microwatts).

    The allowable power for Class 1 lasers increases slightly as you move toward longer wavelengths in the red spectrum. The 20nm increase from 635nm to 655nm results in a small increase in the permitted power level while still maintaining the inherently safe classification of a Class 1 laser.

  5. User

    What about 670nm?

  6. Assistant

    For a Class 1 laser operating in continuous wave mode at 670nm, the maximum power is approximately 0.43 milliwatts (430 microwatts).

    The pattern continues - as you move to longer wavelengths in the red portion of the visible spectrum, the allowable power for Class 1 lasers increases slightly. This is because longer wavelengths (redder light) pose somewhat less risk to the retina, allowing for marginally higher power levels while still maintaining the inherently safe classification.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.