I have this code running on two different VMs sitting on the same hypervisor: import…
- User
I have this code running on two different VMs sitting on the same hypervisor:
import serial import json from paho.mqtt import client from paho.mqtt.enums import CallbackAPIVersion
The callback for when the client receives a CONNACK response from the server.
def on_connect(client, userdata, flags, reason_code, properties): print(f"Connected with result code {reason_code}") # Subscribing in on_connect() means that if we lose the connection and # reconnect then subscriptions will be renewed. client.subscribe("topic") message = { "type": "status", "source": "gray", "data": "Some String" } mqttc.publish("topic", json.dumps(message), qos=0)
The callback for when a PUBLISH message is received from the server.
def on_message(msg): print(msg.topic+" "+str(msg.payload))
mqttc = client.Client(callback_api_version=CallbackAPIVersion.VERSION2) mqttc.on_connect = on_connect mqttc.on_message = on_message
mqttc.connect(host="localhost") mqttc.loop_forever()
This code is used in conjunction with this socat forwarding: socat TCP-LISTEN:1883,reuseaddr,fork /dev/ttyS1,raw,echo=0
The VM is connected to the hypervisor over serial connections /dev/ttyS1 and end up in the hypervisor's /tmp/black.sock for VM1 and /tmp/gray.sock for VM2. I MUST NOT USE IP between these hosts so please do not make assumptions like that.
On the hypervisor a message broker is running (mosquitto). I can see the messages coming into both /tmp/black.sock and gray.sock. now i need to make this work on the broker side so that topics are forwarded between VMs. please assist while not making massive assumptions
Assistant
Okay, let's break down how to achieve MQTT message forwarding between your two VMs via serial connections and the Mosquitto broker on your hypervisor. The key is to leverage Mosquitto's bridging capabilities. Since you're constrained to using serial and cannot use IP-based connections, this is a more involved setup than usual.
Conceptual Overview:
- Socat Tunnel: You already have socat running to forward serial data to sockets. These sockets will act as "gateways" to your VMs' MQTT clients.
- Mosquitto Bridges: We'll configure Mosquitto bridges to read from and write to the sockets. This effectively makes Mosquitto an intermediary for MQTT traffic traveling over the serial lines.
- MQTT Client Configuration: Your Python MQTT clients should connect to localhost (the broker) and publish/subscribe to appropriate topics.
- Topic Mapping: Carefully choose topics to ensure that messages are routed correctly between the VMs.
Steps:
-
Mosquitto Configuration (on the Hypervisor):
Edit your
mosquitto.conffile (typically located in/etc/mosquitto/). Add bridge configurations for both VMs. Critically, ensure Mosquitto is running and can access the socket files.# /etc/mosquitto/mosquitto.conf # Existing configurations... # Bridge to VM1 (Black) connection vm1_bridge address localhost:1883 # Must exist, since we cannot connect to TCP topic # both in and out local prefix gray remote prefix black #topic # out 1 #topic # in 1 bridge_protocol_version mqttv5 bridge_require_ssl false bridge_try_private false bridge_username YOUR_USERNAME #If you require authentication bridge_password YOUR_PASSWORD #If you require authentication remote_clientid gray local_clientid black start_type automatic notifications false log_qos 1 log_level debug # Bridge to VM2 (Gray) connection vm2_bridge address localhost:1883 # Must exist, since we cannot connect to TCP topic # both in and out local prefix black remote prefix gray #topic # out 1 #topic # in 1 bridge_protocol_version mqttv5 bridge_require_ssl false bridge_try_private false bridge_username YOUR_USERNAME #If you require authentication bridge_password YOUR_PASSWORD #If you require authentication remote_clientid black local_clientid gray start_type automatic notifications false log_qos 1 log_level debug listener 1883 protocol mqtt listener 9001 protocol websocketsconnection <bridge_name>: Defines a unique name for each bridge.address localhost:1883: Crucially, this MUST be something that exists. You cannot connect to the sockets because they aren't TCP sockets. This can be anything (within reason) as it will never be actually used in this setup.topic # both in and out local prefix gray remote prefix black: VERY IMPORTANT. This handles topic forwarding. The#means "all topics." Thebothspecifies that all topics should be both in and out. Thelocal prefixandremote prefixspecifies that the local gray should connect to remote black.bridge_protocol_version mqttv5: You are using MQTT v5 so we must specify thisbridge_require_ssl false: We can omit TLS for serialremote_clientid gray: This sets the client ID for the VM in the bridge connection. This must match theclient_idyou set in your Python scripts (if you set one at all). If you don't explicitly set a client ID in your Python scripts, Mosquitto will assign a random one. For simplicity, explicitly set the client ID in your Python scripts.local_clientid black: This sets the client ID for the VM in the bridge connection. This must match theclient_idyou set in your Python scripts (if you set one at all). If you don't explicitly set a client ID in your Python scripts, Mosquitto will assign a random one. For simplicity, explicitly set the client ID in your Python scripts.start_type automatic: Starts the bridge automatically when Mosquitto starts.notifications false: Disables bridge status notifications (optional).username,password: If your Mosquitto instance requires authentication, provide the necessary credentials.
Restart Mosquitto:
sudo systemctl restart mosquitto -
Modify your Python Scripts (VM1 & VM2):
- Set Client ID: Add a
client_idto your MQTT client instantiation. This must match theremote_clientidin yourmosquitto.conffor the respective VM's bridge. Use "gray" for VM2 and "black" for VM1. - Publish and Subscribe: Ensure you're publishing to topics that are forwarded by the bridge configuration.
import serial import json from paho.mqtt import client from paho.mqtt.enums import CallbackAPIVersion # The callback for when the client receives a CONNACK response from the server. def on_connect(client, userdata, flags, reason_code, properties): print(f"Connected with result code {reason_code}") # Subscribing in on_connect() means that if we lose the connection and # reconnect then subscriptions will be renewed. client.subscribe("black/topic") #topic you want to see from the other side message = { "type": "status", "source": "gray", "data": "Some String" } mqttc.publish("gray/topic", json.dumps(message), qos=0) # The callback for when a PUBLISH message is received from the server. def on_message(msg): print(msg.topic+" "+str(msg.payload)) mqttc = client.Client(client_id="gray", callback_api_version=CallbackAPIVersion.VERSION2) # Set client ID! mqttc.on_connect = on_connect mqttc.on_message = on_message mqttc.connect(host="localhost") mqttc.loop_forever()Repeat the above, modifying
client.Client(client_id="black")and theclient.subscribeline. - Set Client ID: Add a
-
Socat (No Changes):
Your socat commands should remain the same, as they are responsible for the fundamental serial-to-socket bridging.
How it Works:
- Your Python script in VM1 (Black) connects to Mosquitto on
localhostwith client ID "black". - Your Python script in VM2 (Gray) connects to Mosquitto on
localhostwith client ID "gray". - When VM1 publishes a message to the topic "black/some/topic", Mosquitto receives it.
- The
vm1_bridgebridge configuration sees this message (becausetopic # both in and out local prefix gray remote prefix blackis configured to forward everything to the local broker) and sends it over the socket to the hypervisor's localhost on port 1883. - The
vm2_bridgebridge configuration sees this message (becausetopic # both in and out local prefix gray remote prefix blackis configured to forward everything to the local broker) and sends it over the socket to the hypervisor's localhost on port 1883. - When VM2 subscribes to the topic "black/some/topic" and receives a message.
Troubleshooting:
- Mosquitto Logs: Check the Mosquitto logs (usually in
/var/log/mosquitto/mosquitto.log) for errors related to the bridges. Pay close attention to connection failures, authentication problems, and topic filter issues. - Client IDs: Double-check that the
client_idin your Python scripts exactly matches theremote_clientidin yourmosquitto.conf. Case sensitivity matters. - Topic Filters: Ensure your topic filters in the bridge configuration are correct. Use
#carefully; it can inadvertently forward messages you don't intend to forward. - Socket Permissions: Verify that the Mosquitto process has the necessary permissions to read from and write to the socket files (
/tmp/black.sockand/tmp/gray.sock). A common issue is that the Mosquitto process runs under a different user than the user who created the sockets. You may need to adjust socket permissions usingchmodor change the Mosquitto user. You may also have to put the hypervisor user in thedialoutgroup - Socat Verification: Ensure that socat is running correctly and that data is being forwarded between the serial ports and the sockets. You can use
socat -d -dfor more verbose debugging output. Also, try sending raw data to the sockets usingechoorprintfto verify that data is being transmitted. - Serial Port Configuration: Confirm that the serial port configuration (baud rate, parity, etc.) is correct on both the hypervisor and the VMs. Mismatched configurations can lead to data corruption or communication failures.
Important Considerations:
- Error Handling: Add robust error handling to your Python scripts to catch connection errors, MQTT publish/subscribe failures, and serial communication issues.
- Security: While you're avoiding IP-based communication, consider the security implications of sending MQTT traffic over serial connections. If the serial lines are not physically secured, an attacker could potentially eavesdrop on or inject messages.
- Performance: Serial communication is significantly slower than IP-based communication. Be mindful of the amount of data you're sending and optimize your MQTT message payloads for efficiency. Consider increasing the baud rate if possible.
By carefully configuring Mosquitto bridges and ensuring correct client IDs and topic filters, you should be able to achieve MQTT message forwarding between your VMs via serial connections. Remember to systematically troubleshoot any issues by examining Mosquitto logs, verifying socket permissions, and testing data flow through the serial ports and sockets.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.