Skip to content
The Chat Archive
Qwenqwen3-235b-a22b-no-thinking· Alibaba (Qwen)Hugging Face LMArena Human Preference 140K

how to enter data mode on the tr 9?

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash’s answer.
  1. User

    how to enter data mode on the tr 9?

  2. Qwen Assistant

    To enter Data Mode on the TR-9 (Tascam Porta 02 or Porta 05 clone), follow these steps:

    What is Data Mode?

    Data Mode allows you to access and edit internal parameters of the TR-9, such as system settings, effects, and other hidden functions not available in normal operation.


    🛠️ How to Enter Data Mode on TR-9:

    1. Turn on the TR-9.
    2. Hold down the [FUNCTION] button.
    3. While holding [FUNCTION], press and hold the [STOP] button.
    4. Still holding both buttons, press and hold the [START] button.
    5. Release all three buttons at the same time.

    📌 If done correctly, the display will change to show a hidden menu or parameter list — this is Data Mode.


    What You Can Do in Data Mode:

    In Data Mode, you can:

    • Adjust internal settings (e.g., input levels, output routing)
    • Access system exclusive parameters
    • Modify effect settings beyond the standard interface
    • Enable or disable certain features (depending on firmware)

    ⚠️ Be careful when changing settings in Data Mode — incorrect values can cause unexpected behavior or audio issues.


    Exiting Data Mode:

    • Press the [FUNCTION] button again to exit and return to normal mode.
    • Or simply power off the unit and power it back on.

    If you're looking to do specific edits in Data Mode, let me know what you're trying to adjust, and I can guide you through the exact steps.

  3. User

    sorry i was referring to rd 9!

  4. Qwen Assistant

    Ah, no problem! You're referring to the Roland RD-9, a drum machine and sequencer that combines elements from the TR-808, TR-909, and TR-707.

    🔧 Entering Data Mode on the Roland RD-9:

    The RD-9 does not have a "Data Mode" in the same way older hardware like the TR-series did (e.g., TR-707 or Tascam TR-8). However, it does offer a hidden Parameter Mode (sometimes referred to as "System Mode" or "Global Settings") for adjusting internal settings not accessible in normal operation.


    🎛️ How to Enter Parameter (Global) Mode on the RD-9:

    1. Hold down the [WRITE] button.
    2. While holding [WRITE], press and hold the [START/STOP] button.
    3. Still holding both buttons, press the [BANK SELECT] button.
    4. Release all buttons after pressing [BANK SELECT].

    ✅ If done correctly, you'll enter a hidden menu where you can adjust system-wide parameters such as:

    • MIDI settings
    • Clock sync options
    • Trigger output configurations
    • Global tuning
    • Velocity curves

    📋 What You Can Adjust in Parameter Mode:

    ParameterDescription
    MIDI ChSets the MIDI channel for IN/OUT
    CLK SrcInternal / MIDI / EXT clock source
    EXT TrigEnables/disables external trigger input
    TUNEGlobal tuning adjustment
    VELOCITYOn/Off – enables velocity sensitivity
    KIT DRVKit sound drive (overdrive effect)
    BPMSets default BPM on startup

    Use the [VALUE] knob or pads to scroll through and adjust each parameter.


    🚪 Exiting Parameter Mode:

    • Press the [PLAY] or [STOP] button to exit and return to normal mode.
    • Your changes are saved automatically.

    Let me know what specific setting you’re trying to change in the RD-9 — I’d be happy to guide you step-by-step!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.