Skip to content
TheChatArchiveThe Chat Archive
Coherecommand-a-03-2025· CohereHugging Face LMArena Human Preference 140K

Using Debian Bookworm, is it possible to power down a wifi card so that energy useage…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Mistralmistral-medium-2505’s answer.
  1. User

    Using Debian Bookworm, is it possible to power down a wifi card so that energy useage should be 0 or close to it? device name is wlp1s0

  2. Cohere Assistant

    Yes, it is possible to power down a Wi-Fi card (e.g., wlp1s0) on Debian Bookworm to minimize or nearly eliminate its energy usage. Here’s how you can do it:

    1. Disable the Wi-Fi Card Using ip Command

    You can disable the network interface using the ip command:

    sudo ip link set wlp1s0 down
    

    This will turn off the interface, significantly reducing its power usage.

    2. Unload the Kernel Module

    If you want to completely power down the Wi-Fi card, you can unload the kernel module associated with it. First, identify the module (e.g., iwlwifi for Intel cards):

    lsmod | grep -i wlp1s0
    

    Once you know the module, unload it:

    sudo modprobe -r <module_name>
    

    For example, if the module is iwlwifi:

    sudo modprobe -r iwlwifi
    

    3. Use rfkill to Disable the Radio

    The rfkill command can be used to disable the Wi-Fi radio:

    sudo rfkill block wifi
    

    To unblock it later:

    sudo rfkill unblock wifi
    

    4. Use iwconfig (Deprecated but Still Works)

    Although iwconfig is deprecated, it can still be used to disable the Wi-Fi interface:

    sudo iwconfig wlp1s0 txpower off
    

    5. Blacklist the Module (Permanent Solution)

    If you want the Wi-Fi card to remain powered off permanently, you can blacklist the kernel module. Edit the /etc/modprobe.d/blacklist.conf file:

    sudo nano /etc/modprobe.d/blacklist.conf
    

    Add the following line:

    blacklist <module_name>
    

    For example:

    blacklist iwlwifi
    

    Save the file and reboot for the changes to take effect.

    6. Use tlp for Power Management

    If you’re looking to optimize power usage across your system, consider installing tlp, a Linux power management tool:

    sudo apt install tlp
    sudo tlp start
    

    tlp can automatically manage Wi-Fi power saving modes.

    7. Check Power Usage

    After disabling the Wi-Fi card, you can verify its power state using tools like powertop or turbostat to ensure the power usage is minimal.

    Notes:

    • Disabling the Wi-Fi card will obviously prevent you from using wireless networking until you re-enable it.
    • Some laptops may have hardware switches or BIOS settings to disable Wi-Fi, which could be another option.

    By using one or a combination of these methods, you can effectively power down the Wi-Fi card (wlp1s0) to minimize its energy usage.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.