Skip to content
The Chat Archive
gemini-2.0-flash-001· Google LMArena Human Preference 140K

should the valve be open or closed?

  1. User

    should the valve be open or closed?

  2. Assistant

    The vent/valve position (open or closed) doesn't matter during the Yogurt making process, neither during the "Boil" nor during the "Incubation" step.

    The Instant Pot isn't using pressure for making yogurt. The Yogurt function simply uses the heating element to keep the milk at a constant, low temperature. So, the steam that's produced (if any) can escape without any issues regardless of whether the valve is open or closed.

  3. User

    how can the steam escape of the vent is closed?

  4. Assistant

    You're right to point out the apparent contradiction! My apologies for the initial ambiguity. Let's clarify:

    • Valve Position Doesn't Matter But... Open is Better: The Instant Pot doesn't need a sealed environment (pressure) for yogurt. So technically, either open or closed will work.

    • Why Open is Recommended:

      • To Prevent Condensation: The yogurt-making process can produce a small amount of steam, especially during the initial heating ("Boil") phase. If the valve is closed, this steam will condense inside the lid and drip back into the yogurt. This can slightly alter the texture (making it a bit thinner or causing a slightly watery surface).
      • Preventing a Slight Vacuum: In very rare cases, as the milk cools during incubation, a slight vacuum might form if the valve is closed, making it difficult to open the lid later. This is very infrequent, but opening the vent prevents it.
      • No Harm, Only Potential Benefits: Leaving the valve open cannot negatively impact the yogurt-making process.
    • How Steam Escapes When Open: With the valve in the "Venting" (open) position, there's a clear pathway for any steam to escape through the small hole next to the valve.

    In summary: While the Instant Pot WILL make yogurt with the valve in either position, it's best practice to leave the valve in the "Venting" (open) position during both the "Boil" (if your model has it) and the Incubation phases of yogurt making to minimize condensation and potential vacuum issues, and ensure that the milk is breathing and not being trapped in an air-tight seal.

  5. User

    can i cook condensed sweetened milk this way?

  6. Assistant

    While you could theoretically use the Instant Pot to further cook condensed sweetened milk, it's not generally recommended and requires significant caution. Here's why:

    Reasons for Caution:

    • High Sugar Content = Burning Risk: Condensed sweetened milk is very high in sugar. Sugar caramelizes and burns easily, especially when exposed to direct heat. The Instant Pot, even on low settings, can have hotspots that cause scorching.
    • Thick Consistency = Sticking: The thick, viscous nature of condensed milk makes it prone to sticking to the bottom of the inner pot. This exacerbates the risk of burning and makes cleanup a nightmare.
    • Lack of Precise Temperature Control: While the Instant Pot has low-temperature settings, they aren't as precisely controlled as a double boiler or stovetop simmer. Overcooking can lead to a grainy, unpleasant texture.
    • Better Alternatives: Traditional stovetop methods (double boiler) offer better control and visibility, making it easier to monitor the cooking process and prevent burning.

    If You MUST Use an Instant Pot (Proceed with Extreme Caution):

    1. Use a Pot-in-Pot (PIP) Method: This is crucial. Place the condensed milk in a heat-safe bowl or pan that fits inside the Instant Pot. Add water to the Instant Pot inner pot (about 1-2 cups) without letting it touch the bowl containing the condensed milk. This creates a gentle, indirect heat source.

    2. Low and Slow: Use the "Yogurt" function (if it allows custom temperature settings) or the "Keep Warm" function. Aim for a temperature below simmering (around 180-190°F/82-88°C). The lower and slower, the better to prevent burning. If these are not available, the sauté function on lowest and shortest time intervals possible would be an option too, while keeping the mixture in a PIP setup.

    3. Stir Frequently: Every 15-20 minutes, carefully remove the bowl from the Instant Pot and stir the condensed milk thoroughly. This helps distribute the heat and prevent sticking.

    4. Monitor Closely: Watch for any signs of burning, scorching, or excessive thickening. Adjust the heat accordingly or stop the cooking process altogether if necessary. The mixture should slowly thicken.

    5. Don't Overcook: Overcooking will result in a grainy, hard-to-manage texture.

    What are you trying to achieve by cooking it further? If you're aiming for a more caramel-like flavor or a deeper color, I'd highly advise using a more traditional caramelization method like a dry caramel or a wet caramel. Or, if you want a thicker texture, try reducing it gently on the stovetop in a pan with a large surface area, stirring constantly.

    In short: While technically possible, cooking condensed sweetened milk in an Instant Pot carries significant risks and offers minimal benefits over traditional methods. Unless you have a compelling reason to use the Instant Pot, I strongly recommend against it.

  7. User

    I meant to say canned condensed tin, in a sealed can; usually, people do it a pot of water on stove top, for a a few hours, but one has to keep an eye on it all the time to ensure that water does not evaporate, otherwise the tin overheats and explodes; on the contrary, instant pot would maintain low temperature, under a closed lid, so no risk of drying out and overheating, in the worst case, if starts overheating, it will stop, won't it? what can go wrong?

  8. Assistant

    Okay, that clarifies things significantly! You're talking about making "dulce de leche" by cooking a sealed can of sweetened condensed milk – often called "canned caramel" or "boiled condensed milk."

    Yes, you are correct! An Instant Pot is a much safer and more convenient method for this process than the traditional stovetop boiling. The concerns I had previously about burning the milk itself are irrelevant in this scenario because the milk is sealed in the can.

    Here's why the Instant Pot is great for this:

    • Consistent Temperature: The Instant Pot maintains a consistent temperature, unlike a stovetop, which can fluctuate and require constant monitoring.
    • No Evaporation Worry: You're right; the sealed Instant Pot eliminates the risk of the water evaporating and the can exploding. This is the major advantage over the stovetop method.
    • Automatic Shutoff: Even if there were a malfunction, the Instant Pot's safety features would prevent a catastrophic event. It's designed to shut off if it overheats or detects a problem.
    • Hands-Off: You can set it and forget it (mostly!).

    How to Make Dulce de Leche from a Sealed Can in an Instant Pot:

    1. Remove the Label: This is crucial! The paper label will disintegrate and clog your Instant Pot. Soak the can in warm water for a few minutes to easily peel off the label.
    2. Submerge the Can Completely: Place the can(s) horizontally in the Instant Pot. Pour in enough water to completely cover the cans by at least an inch or two. Using a trivet underneath the can will also allow more water to flow around the can if you want to be extra safe.
    3. Cook Time: This depends on how dark and thick you want the dulce de leche:
      • 40 minutes: For a light caramel color and thinner consistency.
      • 50-60 minutes: For a medium caramel color and thicker consistency (most common).
      • 70-80 minutes: For a dark caramel color and very thick consistency.
      • Note: These times are approximate and depend on your specific Instant Pot model and the brand of condensed milk. It's best to start with a shorter time and adjust based on your preference after the first attempt.
    4. High Pressure, Natural Release: Close the lid, set the valve to sealing, and cook on HIGH pressure for the desired time. Once the cooking time is up, let the pressure release naturally. This is important for safety; a quick release could cause the can to shift violently.
    5. Cool Completely Before Opening: Once the pressure is fully released, carefully remove the can from the Instant Pot. Let it cool completely (several hours or overnight) before opening. Opening a hot can of dulce de leche can be dangerous (it can erupt).
    6. Opening the Can: Open the can carefully, using a can opener. The dulce de leche will be hot, so be cautious.
    7. Enjoy! You can now use your homemade dulce de leche in pies, cookies, cakes, or anything else you like.

    What Could Go Wrong (and How to Prevent It):

    • Incomplete Label Removal: Bits of paper label can clog the pressure release valve. Solution: Thoroughly remove all traces of the label.
    • Insufficient Water: If the water level drops below the top of the can, you risk overheating and, in a worst-case scenario (though unlikely with the Instant Pot's safety features), a can rupture. Solution: Ensure the can is fully submerged and use enough water to account for any minimal evaporation.
    • Opening the Can While Hot: Extremely hot and pressurized dulce de leche can erupt, causing burns. Solution: Be patient and allow the can to cool completely.
    • Dented Can: Never use a can that is significantly dented or damaged, as the seal may be compromised.

    In conclusion: Using an Instant Pot to make dulce de leche from a sealed can of sweetened condensed milk is a safe, effective, and convenient method. Follow the instructions carefully, especially regarding label removal, water level, natural pressure release, and cooling before opening, and you'll be rewarded with delicious, homemade dulce de leche!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.