Skip to content
TheChatArchiveThe Chat Archive
gpt-4.1-2025-04-14· OpenAIHugging Face LMArena Human Preference 140K

kodi pvr tv not showing tv channel's timetable and hence currently playing too. Should…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Qwenqwq-32b’s answer.
  1. User

    kodi pvr tv not showing tv channel's timetable and hence currently playing too. Should show, but it's like there's no data. But the data is there on the server and all the same settings (copied folder) work well on Windows and Linux. But here we have LibreElec. Fix this specifically for LibreElec. Solve this fully.My LibreElec is 11.06. I forgot to tell that my Android 4 also shows no epg and no now-playing info. But now for LibreElec. I've told you the details. I'm a top computer scientist. I have Garuda Linux with SSH (remind me how to find my LibreElec raspberry's ip and connect), begin from the beginning and solve all fully

  2. Assistant

    Absolutely, let's tackle your Kodi PVR EPG (Electronic Program Guide) issue on LibreELEC 11.0.6 step by step, with a focus on why EPG/now-playing is missing even though it works on other platforms, and how to debug and fix it. I'll also remind you how to find your LibreELEC device's IP and SSH in.


    1. Find LibreELEC Raspberry Pi's IP Address

    You can do this in several ways:

    A. From LibreELEC GUI (TV/Monitor)

    • Go to Settings > System Information > Network.
    • Note the IP address (e.g., 192.168.1.42).

    B. From Your Router

    • Log into your router's admin page and look for connected devices. Find the one named LibreELEC or matching your Pi's MAC address.

    2. SSH into LibreELEC from Garuda Linux

    Open a terminal on Garuda and run:

    ssh root@<libreelec-ip>
    

    Default password is usually libreelec (unless you changed it).


    3. Check Kodi PVR Backend Connection

    • Is the PVR backend (e.g., TVHeadend, NextPVR, etc.) running and accessible from LibreELEC?
    • On LibreELEC, go to Settings > Add-ons > My Add-ons > PVR clients and check your PVR client status.
    • Make sure the server IP/hostname, port, username, and password are correct.

    4. Check EPG Data Source

    • Is the EPG source (XMLTV, OTA, etc.) configured in the backend?
    • If you use TVHeadend, log into its web interface and check Configuration > Channel/EPG > EPG Grabber Modules.
    • Make sure EPG data is being fetched and mapped to channels.

    5. Check Kodi EPG Database

    Sometimes the EPG database gets corrupted or stuck. Let's clear it:

    A. Stop Kodi

    SSH in and run:

    systemctl stop kodi
    

    or

    killall kodi.bin
    

    B. Remove EPG Database

    rm /storage/.kodi/userdata/Database/Epg*.db
    

    C. Start Kodi

    systemctl start kodi
    

    or reboot:

    reboot
    

    Kodi will rebuild the EPG database on next start.


    6. Check Kodi Logs for EPG Errors

    SSH in and run:

    cat /storage/.kodi/temp/kodi.log | grep -i epg
    

    Look for errors or warnings about EPG or PVR.


    7. Check Time/Timezone

    Incorrect time can cause EPG to appear empty. On LibreELEC:

    • Go to Settings > LibreELEC > Regional and set the correct timezone.
    • Check system time:
    date
    

    If wrong, fix your NTP settings in Settings > LibreELEC > Network > NTP.


    8. Check PVR Client Settings in Kodi

    • Go to Settings > PVR & Live TV > Guide.
    • Ensure "Clear data" is run (this wipes and reloads EPG).
    • Check "EPG update interval" is reasonable (e.g., 4 hours).

    9. Check for Add-on or System Updates

    • Make sure your PVR client add-on is up to date.
    • LibreELEC 11.0.6 is recent, but check for any updates or bugfixes for your PVR client.

    10. If Using TVHeadend: Check Access Control

    • In TVHeadend web UI, go to Configuration > Access Control.
    • Make sure the LibreELEC device's IP/user has access to EPG and streaming.

    11. If All Else Fails: Re-add PVR Client

    • Disable and re-enable the PVR client in Kodi.
    • Or, remove and re-add the PVR client add-on.

    12. Special Note: Android 4 Also Shows No EPG

    If both LibreELEC and Android 4 show no EPG, but Windows/Linux do, the issue may be with the PVR backend's access control, EPG format, or network restrictions. Double-check:

    • The backend is accessible from all devices.
    • No firewall or network isolation.
    • EPG data is in a compatible format (XMLTV, etc.).

    13. Summary Checklist

    • Confirm backend is running and accessible.
    • Confirm EPG data is present in backend.
    • Confirm Kodi PVR client is configured correctly.
    • Clear Kodi EPG database.
    • Check logs for errors.
    • Confirm system time is correct.
    • Check access control on backend.
    • Try re-adding PVR client.

    14. Advanced Debugging

    If you want to see live EPG data being fetched, enable debug logging in Kodi:

    • Settings > System > Logging > Enable debug logging
    • Reproduce the issue, then check /storage/.kodi/temp/kodi.log for detailed info.

    15. If Still Not Working

    • Tell me your PVR backend (TVHeadend, NextPVR, etc.), EPG source, and any relevant logs.
    • If you want, paste relevant log snippets here for further analysis.

    Let me know which PVR backend you use and any error messages you see in the logs, and I can help you further debug!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.

Identical first prompt