Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-3-5-sonnet-20241022· AnthropicHugging Face LMArena Human Preference 140K

The Pine version of this script is unspecified, so it will compile as Pine v1. To use…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-sonnet-4-20250514’s answer.
  1. User

    The Pine version of this script is unspecified, so it will compile as Pine v1. To use another version of Pine, add '//@version={versionNumber}' to the top of the script. E.g., '//@version=5' for Pine v5.

  2. Claude Assistant

    بله، درست است. برای اسکریپت TradingView با زبان Pine، باید نسخه را مشخص کنیم. اینجا یک اسکریپت Pine v5 برای نمایش سطوح حمایت و مقاومت ارائه می‌کنم:

    //@version=5
    indicator("Support & Resistance Levels", overlay=true)
    
    // تنظیمات
    lookback = input.int(20, "Lookback Period")
    threshold = input.float(0.02, "Price Threshold", minval=0.001, maxval=0.1, step=0.001)
    show_labels = input.bool(true, "Show Labels")
    strong_level_touches = input.int(3, "Strong Level Min Touches")
    
    // توابع کمکی
    pivotlow = ta.pivotlow(low, lookback, lookback)
    pivothigh = ta.pivothigh(high, lookback, lookback)
    
    // آرایه‌های ذخیره سطوح
    var float[] support_levels = array.new_float(0)
    var float[] resistance_levels = array.new_float(0)
    var int[] support_touches = array.new_int(0)
    var int[] resistance_touches = array.new_int(0)
    
    // بررسی و اضافه کردن سطوح جدید
    if not na(pivotlow)
        newLevel = true
        for i = 0 to array.size(support_levels) - 1
            level = array.get(support_levels, i)
            if math.abs(level - pivotlow) / level < threshold
                newLevel := false
                array.set(support_touches, i, array.get(support_touches, i) + 1)
                break
        if newLevel
            array.push(support_levels, pivotlow)
            array.push(support_touches, 1)
    
    if not na(pivothigh)
        newLevel = true
        for i = 0 to array.size(resistance_levels) - 1
            level = array.get(resistance_levels, i)
            if math.abs(level - pivothigh) / level < threshold
                newLevel := false
                array.set(resistance_touches, i, array.get(resistance_touches, i) + 1)
                break
        if newLevel
            array.push(resistance_levels, pivothigh)
            array.push(resistance_touches, 1)
    
    // رسم سطوح
    draw_level(price, touches, isSupport) =>
        var line level_line = na
        var label level_label = na
        
        if not na(price)
            color = isSupport ? 
                 (touches >= strong_level_touches ? color.new(color.green, 0) : color.new(color.green, 50)) :
                 (touches >= strong_level_touches ? color.new(color.red, 0) : color.new(color.red, 50))
            
            style = touches >= strong_level_touches ? line.style_solid : line.style_dashed
            width = touches >= strong_level_touches ? 2 : 1
            
            if not na(level_line)
                line.delete(level_line)
            if not na(level_label) and show_labels
                label.delete(level_label)
                
            level_line := line.new(x1=bar_index - lookback, 
                 y1=price, 
                 x2=bar_index + 5, 
                 y2=price,
                 color=color,
                 style=style,
                 width=width,
                 extend=extend.right)
                 
            if show_labels
                level_label := label.new(x=bar_index + 10,
                     y=price,
                     text=isSupport ? 
                         "S (" + str.tostring(touches) + ")" :
                         "R (" + str.tostring(touches) + ")",
                     color=color,
                     style=label.style_label_left,
                     textcolor=color.white)
    
    // رسم همه سطوح
    if barstate.islast
        for i = 0 to array.size(support_levels) - 1
            level = array.get(support_levels, i)
            touches = array.get(support_touches, i)
            draw_level(level, touches, true)
            
        for i = 0 to array.size(resistance_levels) - 1
            level = array.get(resistance_levels, i)
            touches = array.get(resistance_touches, i)
            draw_level(level, touches, false)
    
    // نمایش اطلاعات اضافی
    var table info = table.new(position.top_right, 2, 2)
    if barstate.islast
        strong_supports = 0
        strong_resistances = 0
        
        for i = 0 to array.size(support_touches) - 1
            if array.get(support_touches, i) >= strong_level_touches
                strong_supports += 1
                
        for i = 0 to array.size(resistance_touches) - 1
            if array.get(resistance_touches, i) >= strong_level_touches
                strong_resistances += 1
        
        table.cell(info, 0, 0, "Strong Supports", bgcolor=color.new(color.green, 90))
        table.cell(info, 1, 0, str.tostring(strong_supports), bgcolor=color.new(color.green, 90))
        table.cell(info, 0, 1, "Strong Resistances", bgcolor=color.new(color.red, 90))
        table.cell(info, 1, 1, str.tostring(strong_resistances), bgcolor=color.new(color.red, 90))
    
    // اضافه کردن میانگین متحرک‌ها
    ma20 = ta.sma(close, 20)
    ma50 = ta.sma(close, 50)
    
    plot(ma20, "MA20", color=color.new(color.blue, 0), linewidth=1)
    plot(ma50, "MA50", color=color.new(color.orange, 0), linewidth=1)
    
    // نمایش سیگنال‌های احتمالی
    plotshape(ta.crossover(close, ma20), "Cross Above MA20", style=shape.triangleup, location=location.belowbar, color=color.green, size=size.small)
    plotshape(ta.crossunder(close, ma20), "Cross Below MA20", style=shape.triangledown, location=location.abovebar, color=color.red, size=size.small)
    

    ویژگی‌های این اسکریپت:

    1. تشخیص خودکار سطوح:

      • استفاده از Pivot Points برای شناسایی سطوح
      • گروه‌بندی سطوح نزدیک به هم
    2. رنگ‌بندی هوشمند:

      • سطوح قوی: رنگ پررنگ و خط ممتد
      • سطوح ضعیف: رنگ کمرنگ و خط خط‌چین
    3. نمایش اطلاعات تکمیلی:

      • تعداد برخوردها با هر سطح
      • جدول خلاصه سطوح قوی
    4. میانگین‌های متحرک:

      • MA20 و MA50
      • نمایش سیگنال‌های تقاطع
    5. قابلیت تنظیم:

      • دوره نگاه به عقب
      • آستانه قیمت برای گروه‌بندی
      • حداقل تعداد برخورد برای سطوح قوی

    برای استفاده:

    1. این کد را در TradingView در بخش Pine Editor کپی کنید
    2. روی "Add to Chart" کلیک کنید
    3. تنظیمات را طبق نیاز خود تغییر دهید

    این اسکریپت سطوح حمایت و مقاومت را به صورت پویا محاسبه و نمایش می‌دهد و با هر بار آپدیت قیمت، سطوح را به‌روز می‌کند.

  3. User

    Mismatched input 'end of line without line continuation' expecting ')'

  4. Claude Assistant

    اصلاح شده اسکریپت برای رفع خطای سینتکس:

    //@version=5
    indicator("Support & Resistance Levels", overlay=true)
    
    // تنظیمات
    lookback = input.int(20, "Lookback Period")
    threshold = input.float(0.02, "Price Threshold", minval=0.001, maxval=0.1, step=0.001)
    show_labels = input.bool(true, "Show Labels")
    strong_level_touches = input.int(3, "Strong Level Min Touches")
    
    // محاسبه نقاط پیوت
    pivotlow = ta.pivotlow(low, lookback, lookback)
    pivothigh = ta.pivothigh(high, lookback, lookback)
    
    // آرایه‌های ذخیره سطوح
    var support_levels = array.new_float(0)
    var resistance_levels = array.new_float(0)
    var support_touches = array.new_int(0)
    var resistance_touches = array.new_int(0)
    
    // تابع بررسی و اضافه کردن سطح جدید
    f_add_level(level, levels, touches, is_support) =>
        if not na(level)
            newLevel = true
            for i = 0 to array.size(levels) - 1
                current_level = array.get(levels, i)
                if math.abs(current_level - level) / current_level < threshold
                    newLevel := false
                    array.set(touches, i, array.get(touches, i) + 1)
                    break
            if newLevel
                array.push(levels, level)
                array.push(touches, 1)
    
    // اضافه کردن سطوح جدید
    f_add_level(pivotlow, support_levels, support_touches, true)
    f_add_level(pivothigh, resistance_levels, resistance_touches, false)
    
    // تابع رسم سطح
    f_draw_level(price, touches, is_support) =>
        if not na(price)
            color = is_support ? 
                 (touches >= strong_level_touches ? color.green : color.new(color.green, 50)) :
                 (touches >= strong_level_touches ? color.red : color.new(color.red, 50))
            
            style = touches >= strong_level_touches ? line.style_solid : line.style_dashed
            width = touches >= strong_level_touches ? 2 : 1
            
            line.new(bar_index[lookback], price, bar_index, price,
                 color=color,
                 style=style,
                 width=width,
                 extend=extend.right)
                 
            if show_labels
                label.new(bar_index, price,
                     text=is_support ? 
                         "S" + str.tostring(touches) :
                         "R" + str.tostring(touches),
                     color=color,
                     style=label.style_label_left,
                     textcolor=color.white)
    
    // رسم سطوح در آخرین بار
    if barstate.islast
        for i = 0 to array.size(support_levels) - 1
            f_draw_level(array.get(support_levels, i), array.get(support_touches, i), true)
        
        for i = 0 to array.size(resistance_levels) - 1
            f_draw_level(array.get(resistance_levels, i), array.get(resistance_touches, i), false)
    
    // میانگین‌های متحرک
    ma20 = ta.sma(close, 20)
    ma50 = ta.sma(close, 50)
    
    // رسم میانگین‌های متحرک
    plot(ma20, "MA20", color=color.blue, linewidth=1)
    plot(ma50, "MA50", color=color.orange, linewidth=1)
    
    // نمایش سیگنال‌های تقاطع
    plotshape(ta.crossover(close, ma20), "Cross Above MA20", 
             style=shape.triangleup, 
             location=location.belowbar, 
             color=color.green, 
             size=size.small)
    
    plotshape(ta.crossunder(close, ma20), "Cross Below MA20", 
             style=shape.triangledown, 
             location=location.abovebar, 
             color=color.red, 
             size=size.small)
    
    // نمایش اطلاعات در جدول
    var tbl = table.new(position.top_right, 2, 2, bgcolor=color.new(color.black, 90))
    
    if barstate.islast
        strong_s = 0
        strong_r = 0
        
        for i = 0 to array.size(support_touches) - 1
            if array.get(support_touches, i) >= strong_level_touches
                strong_s += 1
                
        for i = 0 to array.size(resistance_touches) - 1
            if array.get(resistance_touches, i) >= strong_level_touches
                strong_r += 1
        
        table.cell(tbl, 0, 0, "Strong S", bgcolor=color.new(color.green, 90))
        table.cell(tbl, 1, 0, str.tostring(strong_s), bgcolor=color.new(color.green, 90))
        table.cell(tbl, 0, 1, "Strong R", bgcolor=color.new(color.red, 90))
        table.cell(tbl, 1, 1, str.tostring(strong_r), bgcolor=color.new(color.red, 90))
    

    تغییرات اصلی:

    1. اصلاح ساختار توابع و پرانتزگذاری
    2. ساده‌سازی برخی توابع
    3. بهبود مدیریت حافظه با استفاده از توابع کمکی
    4. اصلاح سینتکس برای سازگاری با Pine v5

    برای استفاده:

    1. کد را در Pine Editor کپی کنید
    2. دکمه "Add to Chart" را بزنید
    3. تنظیمات را از طریق Settings تغییر دهید

    این اسکریپت:

    • سطوح حمایت و مقاومت را نشان می‌دهد
    • سطوح قوی را با رنگ پررنگ‌تر مشخص می‌کند
    • میانگین‌های متحرک و سیگنال‌های آنها را نمایش می‌دهد
    • تعداد سطوح قوی را در یک جدول نشان می‌دهد

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.