Skip to content
TheChatArchiveThe Chat Archive
Mistralmistral-small-2506· Mistral AIHugging Face LMArena Human Preference 140K

1. Download the free trial of Tableau (link in the Resources). 2. Install Tableau on…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with o4-mini-2025-04-16’s answer.
  1. User
    1. Download the free trial of Tableau (link in the Resources).
    2. Install Tableau on your computer and register an account with the same email you used to download the software.
    3. Download the daikibo-telemetry-data.json.zip file -> unzip -> and import it in Tableau.
    4. Create a calculated measure field called "Unhealthy" with a value of 10 for every unhealthy status (representing 10 mins of potential down time since the previous message).
    5. Create a bar chart called “Down Time per Factory”.
    6. Create a new sheet with a new bar chart called “Down Time per Device Type”.
    7. Create a Dashboard with the 2 previous sheets and set the first chart to be used as a filter (selecting a factory in the first chart shows only the down time of the machines in this factory in the second chart).
    8. Select the factory with the most down time (click on its bar), make a screenshot of the dashboard and upload it as a submission for this task.

    these are the things i have to do... and i completed till task 3... now can you tell me the steps how can i do other tasks as well

  2. Mistral Assistant

    Certainly! Below are the step-by-step instructions to complete the remaining tasks in Tableau:


    Task 4: Create a Calculated Measure Field Called "Unhealthy"

    1. Open Tableau and connect to your daikibo-telemetry-data.json file (if not already connected).
    2. Go to the Data Source tab (bottom-left corner).
    3. Right-click on the data source and select "Create Calculated Field".
    4. Name the field "Unhealthy".
    5. Enter the formula:
      IF [status] = "unhealthy" THEN 10 ELSE 0 END
      
      (This assigns 10 for every "unhealthy" status, representing 10 minutes of downtime.)
    6. Click OK to save the calculated field.

    Task 5: Create a Bar Chart Called “Down Time per Factory”

    1. Create a new sheet (click the "+" icon next to "Sheet 1").
    2. Drag "factory" to the Columns shelf (this will be the x-axis).
    3. Drag "Unhealthy" (the calculated field) to the Rows shelf (this will be the y-axis).
    4. Change the chart type to a bar chart (if not already):
      • Right-click on the chart → "Show Me" → Select the bar chart option.
    5. Rename the sheet to "Down Time per Factory" (right-click the sheet tab → Rename).

    Task 6: Create a New Bar Chart Called “Down Time per Device Type”

    1. Create a new sheet (click the "+" icon).
    2. Drag "device_type" to the Columns shelf.
    3. Drag "Unhealthy" to the Rows shelf.
    4. Change the chart type to a bar chart (if needed).
    5. Rename the sheet to "Down Time per Device Type".

    Task 7: Create a Dashboard with the 2 Charts and Set Up Filtering

    1. Create a new dashboard (click the "New Dashboard" button).
    2. Add both sheets to the dashboard:
      • Drag "Down Time per Factory" to the left side.
      • Drag "Down Time per Device Type" to the right side.
    3. Set up filtering:
      • Click on the "Down Time per Factory" chart.
      • Right-click on the factory name (e.g., "Factory A") → "Keep Only" (this will filter the second chart).
      • Alternatively, you can use Actions for dynamic filtering:
        • Go to Dashboard → Actions → Add Action → Filter.
        • Set the source as the first chart and target as the second chart.
    4. Adjust layout (resize charts as needed).

    Task 8: Select the Factory with the Most Down Time and Take a Screenshot

    1. Identify the factory with the highest "Unhealthy" value (longest bar in the first chart).
    2. Click on that bar to filter the second chart.
    3. Take a screenshot of the dashboard (use PrtScn or Snipping Tool on Windows, Cmd+Shift+4 on Mac).
    4. Save the screenshot and upload it as your submission.

    Final Checklist

    ✅ Calculated field "Unhealthy" created. ✅ "Down Time per Factory" bar chart created. ✅ "Down Time per Device Type" bar chart created. ✅ Dashboard with filtering set up. ✅ Screenshot taken and submitted.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.