Skip to content
TheChatArchiveThe Chat Archive
gpt-4.1-mini-2025-04-14· OpenAIAi2 WildChat-4.8M (AI2)

hey, my ethernet is working but i cant connect it with comp, ive updated the bios and…

  1. User

    hey, my ethernet is working but i cant connect it with comp, ive updated the bios and lan drivers but still nothing. can you assist please?

  2. Assistant

    Sure! Let's try to narrow down the issue step-by-step. When you say your Ethernet is working but you can't connect it with your computer, do you mean:

    1. Your Ethernet cable is connected, but your computer isn't getting a network connection (no internet or no local network access)?
    2. The Ethernet port or device you're connecting to (like a router/modem/switch) shows activity but the computer shows no link?
    3. Or something else?

    Here are some general troubleshooting steps to try:

    1. Check Physical Connections:

      • Make sure the Ethernet cable is securely plugged in at both ends (computer and router/modem/switch).
      • Try a different Ethernet cable to rule out a faulty cable.
      • Try a different port on your router/switch if available.
    2. Check Network Status on your Computer:

      • On Windows: Open Command Prompt and type ipconfig /all. Look for your Ethernet adapter and check if it has a valid IP address (typically something like 192.168.x.x or 10.x.x.x).
      • If it shows an IP starting with 169.254, that means your computer isn’t receiving an IP from DHCP.
      • Also, check if the Ethernet adapter is enabled (in Network Connections).
    3. Network Adapter Settings:

      • Go to Network Connections (Windows: Control Panel > Network and Internet > Network Connections or ncpa.cpl).
      • Right-click the Ethernet adapter and select Properties.
      • Check that IPv4 is enabled and set to obtain IP address automatically (unless you use a static IP).
      • You can also try disabling and re-enabling the adapter.
    4. Reset Network Stack:

      • In Command Prompt (run as administrator), run:
        netsh int ip reset
        netsh winsock reset
        ipconfig /release
        ipconfig /renew
        
      • Then reboot your PC.
    5. Check BIOS Settings:

      • Since you updated BIOS, also check if LAN is enabled in BIOS settings.
    6. Test Ethernet on another computer/device:

      • This will help identify if the problem is with the Ethernet connection or your PC.
    7. Check Router/Modem:

      • Sometimes the router's Ethernet ports can be disabled from its admin panel.

    Please provide your operating system and any error messages or LED status on the Ethernet port, if possible. With more info, I can assist you further.

  3. User

    how to Since you updated BIOS, also check if LAN is enabled in BIOS settings?

  4. Assistant

    To check if the LAN (Ethernet) controller is enabled in your BIOS after a BIOS update, follow these general steps:

    1. Restart your computer.

    2. Enter the BIOS/UEFI Setup:

      • As your computer starts, press the key to enter BIOS/UEFI settings. Common keys are Delete, F2, F10, or Esc. The exact key usually appears briefly on the screen during boot (e.g., “Press F2 to enter Setup”).
      • If you're unsure, check your motherboard or laptop manual, or the manufacturer’s website for the correct key.
    3. Navigate to the Integrated Peripherals or Advanced Settings:

      • BIOS menus differ depending on manufacturer, but typically look for a tab or menu named “Advanced”, “Integrated Peripherals”, “Onboard Devices”, or something similar.
    4. Locate the LAN or Ethernet Controller Option:

      • Look for entries like Onboard LAN, Integrated LAN Controller, Ethernet Controller, or similar.
      • Make sure this is set to Enabled.
    5. Save and Exit:

      • After enabling the LAN controller, save your changes (usually by pressing F10) and exit BIOS.
      • The system will reboot automatically.

    Once back into your operating system, check if your Ethernet connection starts working or appears.


    If you get stuck or your BIOS interface looks different, please tell me your motherboard or laptop model, and I can give you more specific instructions!