~Stats Stats are a core game mechanic in Asteros. Along with customizing the class of a…
- User
~Stats Stats are a core game mechanic in Asteros. Along with customizing the class of a tank, players can also modify their tank’s Stats to master their own play style.
Mechanics: As the player levels up, they begin to earn Skill Points, which are used to upgrade stats. Skill Points can be spent either through clicking the + button next to a stat bar (shown at right) or by pressing the corresponding number key. Tanks gain 1 Skill Point for every Level until Level 28, after which one Skill Point is obtained at level 30, and then one Skill Point every three Levels until they reach Level 45. The maximum number of skill points is 33, and a stat can be upgraded 7 times before maxing it out fully (with exception to the Smasher branch - the maximum is 10 upgrades for each stat).
Note: Percentages and statistics on this page are merely approximate. These values are not 100% accurate. However, in many of the 8 stats, converting to 4 stat points or 7 stat points from 3 and 6, respectively, gives a higher overall buff in the respective stat.
$ Stats and their Effects: Health regen: Short for health regeneration. Any tank, who does not receive damage after a certain amount of time, begins to regenerate any lost health. When this stat is upgraded, it will decrease the amount of time needed to fully restore your tank’s health. The more points invested in health regeneration will, the faster that normal health regeneration will heal your tank. The rate of regeneration greatly increases after approximately 30 seconds. Increasing maximum health will not slow down the healing rate. Health regeneration does not apply to a tank’s bullets and drones.
A study conducted in the sandbox shows the results of upgrading the health regen stats a certain number of times. It is the amount of time taken for a level 45 Basic Tank to fully restore its health after ramming into a pentagon, no other stats considered.
Note: this chart only shows the amount of time to full health for a level 1 tank with 0 points into health. Use this chart for a reference to the proportion of change.
No. of points Time to regen. to full health Average regen. rate 7 points 6.41 seconds 15.60% per second 6 points 7.72 seconds 12.95% per second 5 points 9.13 seconds 10.95% per second 4 points 11.75 seconds 8.51% per second 3 points 15.15 seconds 6.60% per second 2 points 23.07 seconds 4.33% per second 1 point 30.67 seconds 3.26% per second 0 points 31.97 seconds 3.12% per second This chart shows the relationship between the regeneration points and the corresponding percentage of the restored durability to the total durability of a tank in the 30 seconds before the great increase of regeneration occurs.
No. of points Total percentage of durability regenerated 10 points* 123% 9 points* 111% 8 points* 99% 7 points 87% 6 points 75% 5 points 63% 4 points 51% 3 points 39% 2 points 27% 1 point 15% 0 points 3% *Smasher class types only Records show that having 9 or more points in regeneration allows regeneration to full health under the 30 seconds timespan, before the great increase in regeneration comes into play. The chart can be translated into this formula:
Durability regen per second = 1/30 * Durability * (0.03 + 0.12 * Regen stat)Therefore, every point gives approximately +12% faster regeneration.
Max health: Max health determines the maximum health pool of your tank. You also passively gain more health for every level you gain, as Base HP = 50 + [2 x (Level - 1)]. With no health upgrades, A level 1 tank has 50 HP, while a max level tank (level 45) has 138 HP.
No. of skill points HP increase 10 points* +200 HP 9 points* +180 HP 8 points* +160 HP 7 points +140 HP 6 points +120 HP 5 points +100 HP 4 points +80 HP 3 points +60 HP 2 points +40 HP 1 point +20 HP 0 points +0 HP *Smasher class types only Body damage: This stat determines how much damage a tank will inflict upon another object on collision. Body damage will also lessen damage from other objects. This is determined by how much damage it can give to the object, namely ammunitions’ health (penetration), so that it gets destroyed faster before reaching the maximum amount of collisions. Body damage is increased by 50% when affecting tanks and decreased by 75% when affecting projectiles (Bullets, traps, drones)
Number of skill points Damage per hit (Shape/tank collision) Damage per hit (Tank/tank collision) Damage per hit (Projectile/tank collision) -3 points (Square, triangle) 8 HP - - -2 points (Pentagon) 12 HP - - -1 points 16 HP - - 0 points (Alpha pentagon) 20 HP 30 HP 5 HP 1 point 24 HP 36 HP 6 HP 2 points (0 for Spike) 28 HP 42 HP 7 HP 3 points (1 for Spike) 32 HP 48 HP 8 HP 4 points (2 for Spike) 36 HP 54 HP 9 HP 5 points (3 for Spike) 40 HP 60 HP 10 HP 6 points (4 for Spike) 44 HP 66 HP 11 HP 7 points (5 for Spike) 48 HP 72 HP 12 HP 8 points* (6 for Spike) 52 HP 78 HP 13 HP 9 points* (7 for Spike) 56 HP 84 HP 14 HP 10 points* (8 for Spike) 60 HP 90 HP 15 HP (9 Points for Spike) 64 HP 96 HP 16 HP (10 Points for Spike) 68 HP 102 HP 17 HP *Smasher class types only At max body damage, a tank can kill a pentagon by tapping it three times. Colliding at full speed will trigger all three impacts in the same instant.
Some tank builds use body damage as their primary method of attack. One Destroyer technique involves hurling their body at opponents using the recoil of their massive cannon. Fast-moving Tri-Angles and Boosters also use body damage to ram unarmored opponents.
A tank affected by spawn invincibility will deal with body damage as normal to enemies while taking no damage themselves.
The Spike’s base body damage +2 higher than other tanks, and thus is +8 higher than the standard 20, or +12 higher than the standard 30 in tank vs. tank situations. Its body damage ranges from 28 HP to 68 HP, or from 42 HP to 102 HP when it collides with a tank.
Shapes have negative body damage stats to match their respective body damage. An alpha pentagon deals the same damage as a tank with 0 points.
Bullet speed: This stat determines the movement speed of the projectiles shot by tanks, and thus also increases how far they travel during their lifespan... Putting points into this stat increases the potential of surprising an opponent. Not only are they a sudden damage point on enemies, but they also may not even see it coming if maxed out. Increasing bullet speed makes bullets harder to dodge as well, and Destroyers with high bullet speed become extremely dangerous.
Bullet speed can slightly decrease the overall damage, as when a bullet is too fast it'll pass through a tank without providing all its potential damage. Turns into drone speed if you upgrade to an Overseer or any other drone tank (except for the Factory).
Formula:
- Bullet speed + ((Bullet speed * Bullet speed stat) ÷ 6)
- For bullets of auto turrets, or traps from Gunner Trapper: Bullet speed + ((Bullet speed * Bullet speed stat) ÷ 8)
Unavailable to Smashers, Spikes, and Landmines as they lack bullets.
Bullet penetration: Could be called bullet health. Each point put into bullet penetration increases its “health", or how many objects a bullet can pass through before its health reaches 0. This includes polygons, tanks and other bullets. If it hits a large tank or shape and it has high penetration, the bullets will bounce off it. If bullets with equal bullet penetration and bullet damage hit each other, they both get destroyed. If a bullet hits another bullet with lower bullet penetration then the penetrating bullet has its life lowered and therefore it will pass through fewer objects. If a bullet hits a tank with high body damage, the bullet will deal less damage because the tank has lowered the bullet’s health to 0 before it can reach the maximum amount of damage it can receive.
This is a supplement to bullet damage, due to the fact the bullet has more health, which allows the bullet to do more damage. Each point in bullet penetration increases a bullet's HP value by 75% of its base value. The following chart shows HP value of a basic Tank's bullet.
Formula: Bullet penetration + (Bullet penetration * Bullet penetration stat)
Collisions with bullets will knock back the object hit and deflect the bullet in the process. If a tank with high health and body damage deflects a bullet (by being hit at the side) then the bullet only deals a specific amount of damage controlled by bullet damage, while a direct hit allows a bullet to damage the tank numerous times due to its high bullet penetration. Turns into drone health if the player upgrades to an Overseer or any other drone tank (except for the Factory).
Unavailable to Smashers, Spikes, and Landmines as they lack bullets.
Bullet damage: Bullet damage determines how much damage a bullet will deal in a single collision. Each point in bullet damage increases this amount. If you upgrade your bullet damage with all 7 skill points that they can fit in, it deals four times more damage per hit than a bullet without bullet damage at maximum. When bullets from the same types of tanks (and some others) with equal penetration collide, the bullet with the higher bullet damage will destroy the other. Each point in bullet damage increases a bullet's damage value by roughly 42.857% of its base value. Bullet damage is decreased by 75% when affecting bullets and traps. When 2 projectiles hit, if at least one of them is a drone, then they will both deal their full damage (unless if the other one is a Necromancer drone, in which case the Necro drone will deal 75% less damage while the other deals its full damage). The following chart shows maximum damage per hit with a basic Tank.
Formula: Bullet damage + ((Bullet damage * Bullet damage stat) ÷ 2)
It turns into drone damage if you upgrade to an Overseer or any other drone tank.
Unavailable to Smashers, Spikes, and Landmines as they lack bullets.
When a bullet has lower health than the target's damage per hit, the bullet's damage per hit is multiplied by the ratio of the bullet's current HP with the target's base damage per hit. When the bullet has higher or equal health comparing to the base damage per hit of the target, the bullet will deal its full damage per hit.
Reload: Reload determines how fast a tank will fire bullets. The Basic Tank class has a base firing speed of 100 bullets per minute. Many class upgrades multiply this firing speed, while others reduce it.
A high firing rate increases a tank’s ability to hit strafing targets and increases its damage per second. Additionally, firing more bullets increases recoil which can be used to propel certain classes of tanks.
For all drone-based classes featuring drone spawners, Reload affects the rate at which new drones are created. The Factory class gains extra utility from this stat, as it affects both minion spawning rate and minion firing rate.
For the Necromancer class, the reload speed stat changes to drone count, increasing the amount of square drones the tank can control.
Unavailable to Smashers, Spikes, and Landmines as they lack Bullets.
Movement speed: This stat determines how fast a tank moves, not including recoil. Naturally, the more points put into this stat, the faster a tank will move. Low-level players can upgrade this stat early to get out of dangerous situations or outrun more powerful opponents. Lower-level tanks are significantly smaller, so a level 8 tank with 7 movement speed moves even faster than other fast tanks like Boosters. However, Destroyers, Annihilators, and Hybrids might catch up with low-level tanks with high speed by using recoil.
Movement speed is passively lowered as your tank levels up, i.e. a level 1 tank is significantly faster than a level 45 tank.
This can increase the power of a body damage build covering more distance than the target will equal more collisions under a second which can mean the difference between a 1 hit or a 3 hit kill.
For Smashers, Spikes, Landmines, and Auto Smashers, there are 10 skill points available for movement speed.
$ Hidden stats and their effects: Hidden stats are stats that can’t be upgraded directly from the bottom-left menu but can also affect a tank’s ability and playstyle. Most of these can only increase/decrease by selecting different classes.
Bullet accuracy/bullet spread Bullet Accuracy determines how straight a barrel fires out bullets, while bullet spread refers to the angle that bullets are fired within. A high bullet spread has a high angle and vice versa.
For example, a Streamliner or a Ranger has much more bullet accuracy, or much less bullet spread, compared to a Sprayer or a Machine Gun.
Recoil: Recoil is how far a tank gets pushed backward when firing. While recoil slows down a tank that is moving forward, towards its ammunition, it can be used strategically or for a faster retreat. The tank with the highest recoil per shot is the Annihilator (6.8 background squares per shot). On the other hand, some Snipers, Spread Shot and the Gunner have so little recoil that it normally cannot be noticed.
All upgrades of the Flank Guard, with the exception of the Tri-Angle and Auto 3/Auto 5 branch, have their cannons evenly distributed over the whole 360°, making each cannon cancel the recoil of the other cannons out, and thus making the tank have virtually no recoil overall.
Examples of recoil usage are:
- For Destroyers, Hybrids, and Annihilators: providing a large speed advantage to either ram, get in close for a good shot, or allow a quicker retreat.
- For Tri-Angles and its upgrades: as a permanent speed boost, because they have more back cannons than front cannons. Their forward-facing cannon can also shoot bullets for offense and/or defense while the backward-facing cannons do the pushing. Sandbox tests have shown that the Booster has the largest overall recoil with any given build, just slightly edging out the Annihilator.
- For multi-shot tanks: particularly the Penta Shot, to move in with the enemy faster and deny them precious ground (or otherwise kill stragglers). Though not having the highest amount of recoil, this type of tank can drastically benefit from it when used safely.
Knockback resistance: Knockback resistance is the reduction of how far a tank gets nudged from a collision, either with a bullet/drone/trap/base drone or another tank’s body. This can only slightly increase as the body damage (by increasing the damage given to the other object) or movement speed (by moving faster) is increased, and otherwise cannot be changed by any type of upgrade. This used to be able to increase by upgrading to the Smasher.
Deceleration: Deceleration is the reduction of velocity of an entity with respect to time. In Asteros, when a tank stops moving, it will slow down before its movement comes to a halt. Each entity (especially projectiles) has a different deceleration rate. Smaller bullets tend to have a lower deceleration rate while bigger ones decelerate faster. Trapper's traps have a very high deceleration rate.
There's a limit on how slow an entity can be. When that limit is reached, they can't decelerate any further. The limit is different for each type of entity, which means some entities (like polygons, some types of projectiles) will never stop moving while others (like tanks, traps) can stop moving and become stationary.
Field of view (FoV): Field of view, or field of vision (FoV for short), is how large a player’s camera is. The field of vision will slightly increase as a tank levels up while upgrading to Sniper and/or its upgrades can also increase the FoV by a large margin. As the FoV of a tank increase, more area will be visible from the camera of that tank, which results in everything seemly to have shrunk as the computer screen size is always consistent.
Compared to other tanks, the Sniper branch shows a strength in their wider FoV, allowing them to see further than other tanks can.
- Assistant
Thanks for this comprehensive overview of stats in Asteros! Here's a consolidated summary with highlights and key points about each stat and its effects for quick reference or helping players understand how to optimize their builds better:
Stats Overview in Asteros
Players earn Skill Points as they level up, which they can invest in stats to tailor tanks to their playstyle. Key notes on point acquisition:
- 1 Skill Point per level from Level 1 to 28 (Total 28 points)
- 1 Skill Point at Level 30
- 1 Skill Point every 3 levels from 30 to 45
- Maximum Skill Points = 33
- Each stat can be upgraded up to 7 times, except Smasher class types can upgrade stats up to 10 times.
Primary Stats and Their Mechanics
Stat Effect Max Upgrades Notes Health Regen Boosts rate of passive health restoration after no damage delay. Higher points reduce time to full heal dramatically. 7 (10 for Smashers) At 9+ regen points, full health is restored under 30 sec before big regen boost kicks in. Max Health Increases maximum HP pool. Base HP scales with level: 50 + 2(Level - 1)* 7 (10 for Smashers) Max health upgrade adds up to +140 HP (non-smashers). Level 45 base HP is 138. Body Damage Damage dealt by tank on collision and reduces damage received similarly. Different scaling against tanks, shapes, bullets. 7 (up to 10 for Smashers) Spike class has higher base damage. Max body damage lets tank kill pentagons in 3 taps. Bullet Speed Increases projectile speed, thus travel distance and ability to hit/surprise enemies. Also affects drone speed (except Factory). 7 Not available for Smashers, Spikes, Landmines (lack bullets). Bullet speed too high can cause bullets to "pass through" targets reducing damage. Bullet Penetration Bullet "health," how many objects a bullet can pass through before getting destroyed. Supports bullet damage by increasing projectile survivability. 7 Not for Smashers, Spikes, or Landmines. Increases bullet HP by +75% per point based on base bullet HP. Bullet Damage Determines damage per bullet hit. Each point increases bullet damage by ~42.857% of its base damage. 7 Not for Smashers, Spikes, or Landmines. Upgrading bullet damage 7 times quadruples bullet damage. Reload Increases firing rate (bullets per minute). Affects drone spawning rate for drone tanks (except Factory). 7 Not for Smashers, Spikes, Landmines. Necromancer uses reload stat differently (drone count). Movement Speed Increases tank movement speed (excluding recoil). Movement speed decreases naturally with tank level increase. 7 (10 for Smashers, Spikes, Landmines, Auto Smashers) Important for dodging, chasing, or ramming builds. Early priority upgrade for survivability.
Important Formulas & Values
-
Base HP:
Base HP = 50 + 2 * (Level - 1)
Example: Level 45 base HP = 50 + 2 * 44 = 138 HP -
Health Regen Rate Formula:
Durability regen per second = (1/30) * Durability * (0.03 + 0.12 * Regen stat)
Each regen point ≈ +12% faster regeneration. -
Bullet Speed:
Bullet Speed = Base bullet speed + (Base bullet speed * Bullet speed stat) / 6
(Turrets and traps use divisor 8 instead of 6.) -
Bullet Damage per Hit:
Damage = Base damage + (Base damage * Bullet damage stat) / 2 -
Bullet Penetration (HP):
Bullet HP = Base bullet HP + (Base bullet HP * Bullet penetration stat)
Hidden Stats (Cannot be Upgraded Directly)
-
Bullet Accuracy / Bullet Spread:
Determines bullet trajectory tightness. Classes like Streamliner and Ranger have higher accuracy than Sprayer or Machine Gun. -
Recoil:
How far the tank is pushed backward after firing. Used for mobility boosts in Destroyers, Annihilators, etc. The Annihilator leads in recoil per shot. -
Knockback Resistance:
Reduction in pushback from collisions and projectiles. Only minor increases possible through body damage and movement speed. Not upgradeable directly anymore. -
Deceleration:
Rate at which a tank slows down after stopping movement. Smaller bullets decelerate less; traps have high deceleration. -
Field of View (FoV):
Camera zoom level: bigger FoV means more visible area but smaller objects on screen. Sniper branch tanks have increased FoV.
Class-Specific Notes
-
Smashers, Spikes, Landmines:
- Can upgrade movement speed up to 10 points.
- Cannot upgrade bullet-related stats as they lack bullets.
- Can upgrade health regen, max health, and body damage up to 10 times.
-
Overseer and Drone Tanks:
- Bullet speed becomes drone speed.
- Bullet penetration becomes drone health.
- Bullet damage becomes drone damage.
-
Necromancer:
- Reload stat affects the number of controllable square drones instead of fire rate.
Tips for Players
- Prioritize movement speed early on for better survivability and chasing/escaping capabilities.
- Invest in body damage if planning to ram or build tank for melee collisions.
- Put points in health regen to recover rapidly especially for aggressive play where taking damage is common.
- For bullet classes, distribute points between bullet damage and bullet penetration to increase your bullet effectiveness.
- Use reload for maximizing sustained DPS, especially for drone classes.
- Max health is always useful to complement survivability but balanced with regen and movement speed.
If you'd like, I can also help with example optimal stat builds for certain playstyles or classes!
- User
HP is healed by regen number per frames (scratch.mit.edu) before faster healing from time out of heal
- Assistant
Thanks for this additional detail! Here’s how your note fits into the Asteros health regeneration mechanics:
Health Regen and Frame-Based Healing in Asteros (as implemented on Scratch)
-
Health regen in Asteros is applied incrementally per frame, rather than as a single chunk over time. This means your tank's HP increases smoothly each frame by a calculated regeneration amount, leading to a steady healing effect.
-
This frame-by-frame regeneration rate corresponds to the regen stat level chosen, with higher stats increasing the HP restored per frame.
-
After not taking damage for a certain timeout period (around 30 seconds in the game), a faster regeneration phase begins, which increases the healing rate significantly. Before this timeout, the regen is slower but steady.
How it Works Conceptually
-
Initial slow regen phase:
Each game frame (e.g., at 30-60 FPS depending on device), the tank's HP increases by:
[ \text{HP healed per frame} = \frac{\text{Total regen per second}}{\text{Frames per second}} ]
where the Total regen per second depends on the regen stat points invested (see formula in the original guide). -
After timeout (~30 seconds without damage):
The regeneration rate jumps significantly, so the amount healed per frame increases accordingly. This lets full health recovery happen faster once the tank has had time to rest.
Practical Implications
-
This frame-based regen ensures smooth and continuous HP recovery rather than a delayed lump sum or sudden regain.
-
When using regen-focused builds, you'll notice your tank’s health ticking up steadily on-screen, then ramping up once the timeout passes.
-
The regen stat directly affects both phases’ healing rates, so investing in regen points shortens time to full recovery.
If you're coding or modifying this logic on Scratch (or similar platforms), you would implement something like:
// Pseudocode for health regen per frame in Scratch-like environment if (time_since_last_damage > regen_timeout) { regen_rate = base_regen_rate * high_regen_multiplier; // fast regen phase } else { regen_rate = base_regen_rate; // normal regen phase } hp = min(max_hp, hp + regen_rate / fps);Where:
regen_timeout= ~30 secondsbase_regen_ratedepends on regen stat pointsfps= frames per second (e.g., 30 or 60)
Summary
- HP regen is a per-frame incremental heal applying a small fraction of total regen per second.
- After ~30 seconds without damage, regen rate jumps to a much faster rate applied each frame.
- The regen stat affects the amount healed per second and thus per frame.
Let me know if you want a more detailed implementation example or help integrating regen mechanics into a Scratch project!
-
- User
Give heal number per frames
- Assistant
Certainly! To calculate the heal amount per frame, you need two things:
- The regen rate per second (depends on regen stat points, from the formula below)
- The frame rate (frames per second, or fps, typically 30 or 60 in Scratch projects)
Step 1: Get Regen Rate per Second
From the original formula:
[ \text{Durability regen per second} = \frac{1}{30} \times \text{Durability} \times (0.03 + 0.12 \times \text{Regen stat}) ]
For example, a Level 45 Basic Tank (max HP 138):
- Let Regen stat = ( R ) (number of regen points invested)
- Durability = 138 (max HP here)
Then,
[ \text{Regen per second} = \frac{1}{30} \times 138 \times (0.03 + 0.12R) = 4.6 \times (0.03 + 0.12R) ]
Step 2: Divide the regen per second by FPS to get per frame heal
Assuming:
- Frame rate ( fps = 30 ) (common for Scratch)
Then:
[ \text{Heal per frame} = \frac{\text{Regen per second}}{fps} = \frac{4.6 \times (0.03 + 0.12R)}{30} = 0.153 \times (0.03 + 0.12R) ]
Examples: Heal amount per frame at various regen levels at 30 fps
Regen points ( R ) Regen/sec = (4.6 \times (0.03 + 0.12R)) Heal/frame (at 30 fps) = Regen/sec / 30 0 (4.6 \times 0.03 = 0.138) 0.0046 HP/frame 1 (4.6 \times (0.03 + 0.12 \times 1) = 4.6 \times 0.15 = 0.69) 0.023 HP/frame 2 (4.6 \times 0.27 = 1.242) 0.0414 HP/frame 3 (4.6 \times 0.39 = 1.794) 0.0598 HP/frame 4 (4.6 \times 0.51 = 2.346) 0.0782 HP/frame 5 (4.6 \times 0.63 = 2.898) 0.0966 HP/frame 6 (4.6 \times 0.75 = 3.45) 0.115 HP/frame 7 (4.6 \times 0.87 = 4.002) 0.133 HP/frame
Summary formula for per frame healing (Lvl 45 Basic Tank, 30fps):
[ \boxed{ \text{Heal per frame} = 0.153 \times (0.03 + 0.12 \times \text{Regen stat}) } ]
Adjusting for other frame rates
Just replace 30 with your
fpsvalue:[ \text{Heal per frame} = \frac{\text{Durability} \times (0.03 + 0.12 \times \text{Regen stat})}{30 \times \text{fps}} ]
If you want the heal/frame for other levels or tanks, just use:
[ \text{Base HP} = 50 + 2 \times (Level - 1) ]
and plug that into the original regen per second formula.
Let me know if you want me to calculate heal per frame for another level or class!
- User
Heal restoration time is 30 second, give formula with 7 regeneration stat
- Assistant
Got it! You asked for the formula to fully restore health in 30 seconds with 7 regeneration stat points, and how that relates to the heal amount per frame.
Let’s clarify and compute the exact healing per frame ensuring the tank heals fully in 30 seconds with 7 regen points.
Known data:
-
Total time to full restore with 7 regen points ≈ 6.41 seconds (from your original chart, but you want 30 seconds for slower regeneration phase before boost)
-
Before 30 seconds, health regen is slower (normal regen rate)
-
After ~30 seconds without damage, regen rate greatly increases
Your statement implies you want the healing per frame value that corresponds to healing exactly full health over 30 seconds under the slow regen phase, presumably before the fast regen kicks in.
Step 1: Determine Base HP at level 45
[ \text{Base HP} = 50 + 2 \times (45 - 1) = 50 + 88 = 138 ]
Step 2: Calculate heal per second to restore full HP in 30 seconds
We want:
[ \text{Heal per second} \times 30 = 138 \implies \text{Heal per second} = \frac{138}{30} = 4.6 \text{ HP/s} ]
Step 3: Derive regen stat value that produces 4.6 HP/s based on formula
Given the formula from your data:
[ \text{Regen per second} = \frac{1}{30} \times \text{Durability} \times (0.03 + 0.12 \times R) ]
Plugging in Durability = 138:
[ \text{Regen per second} = \frac{138}{30} \times (0.03 + 0.12 \times R) = 4.6 \times (0.03 + 0.12 R) ]
Set equal to 4.6 HP/s to find suitable (R):
[ 4.6 \times (0.03 + 0.12 R) = 4.6 \implies 0.03 + 0.12R = 1 \implies 0.12 R = 0.97 \implies R = \frac{0.97}{0.12} \approx 8.08 ]
So about 8 regen stat points are required to heal full health in 30 seconds on the slow regen phase alone.
Since max for most tanks is 7 points (except Smashers), 7 points is a bit slower.
Step 4: Calculate heal per second with 7 regen stat points
[ \text{Regen per second} = 4.6 \times (0.03 + 0.12 \times 7) = 4.6 \times (0.03 + 0.84) = 4.6 \times 0.87 = 4.002 \text{ HP/s} ]
Step 5: Calculate time to full restore with 7 regen points at slow rate
[ \text{Time} = \frac{138}{4.002} \approx 34.5 \text{ seconds} ]
Matches well with the data you gave (~31.97 seconds at 0 points, 6.41 seconds at 7 points with fast regen — slow regen is thus ~34.5 seconds for 7 points).
Step 6: Calculate heal per frame assuming 30 FPS
[ \text{Heal per frame} = \frac{\text{Heal per second}}{\text{FPS}} = \frac{4.002}{30} = 0.1334 \text{ HP/frame} ]
Final formula for heal per frame at 7 regen stat points (Level 45, 30 FPS):
[ \boxed{ \text{Heal per frame} = \frac{1}{\text{FPS}} \times \frac{\text{Durability}}{30} \times (0.03 + 0.12 \times 7) } ]
or numerically:
[ \text{Heal per frame} = \frac{138}{30 \times 30} \times 0.87 = 0.1334 , HP/frame ]
Summary:
-
At 7 regen points, the tank heals about 0.133 HP per frame at 30 FPS during the slow regeneration phase.
-
This corresponds to healing about 4 HP/s, leading to full restoration in roughly 34.5 seconds.
-
To heal full HP strictly within 30 seconds on slow regen phase, you'd need about 8 regen points (only possible for Smashers).
If you want:
-
The fast regen heal per frame after the timeout (~30 seconds),
-
Or formulas for other frame rates or levels,
let me know!
-