Skip to content
TheChatArchiveThe Chat Archive
gpt-4.1-mini-2025-04-14· OpenAIAi2 WildChat-4.8M (AI2)

I have 2 desktops with windows in the same local network ( both connected to the…

  1. User

    I have 2 desktops with windows in the same local network ( both connected to the internet through same router), what's the best way to exchange files between them

  2. Assistant

    If you have two desktops on the same local network (connected to the same router), there are several efficient ways to exchange files between them. Here are some of the best methods for Windows:

    1. Use Windows File Sharing (SMB)

    Windows has built-in file sharing that works well for local networks.

    Steps:

    • On the source computer, right-click the folder you want to share → Properties → Sharing tab → Share…
    • Select the users or choose "Everyone" for simple sharing, and set permissions.
    • Click Share and then Done.
    • On the other computer, open File Explorer and type \\[IP_address_of_source_computer] or \\[computer_name] in the address bar (e.g., \\192.168.1.5).
    • You’ll see the shared folders and can copy files between them.

    Pros: No extra software needed; fast local transfers; integrated into Windows.


    2. Use Nearby Sharing

    Windows 10 and 11 have a feature called Nearby Sharing that uses Bluetooth/Wi-Fi direct for quick transfer.

    Steps:

    • Ensure both PCs have Nearby Sharing enabled:
      • Go to Settings → System → Shared Experiences → Turn on Nearby Sharing.
    • On the source PC, right-click a file, select Share → Choose the nearby PC from the list.
    • Accept the file on the destination PC.

    Pros: Easy drag-and-drop sharing; no network setup required, but works best if devices support Bluetooth.


    3. Use a USB Drive or External Storage

    If the files are large or if you want a more manual method, copy files to a USB stick and plug it into the other PC.


    4. Use Third-Party Software

    Some software makes file transfers very simple:

    • Sharedrop (https://www.sharedrop.io/): Browser-based P2P local file sharing (no registration).
    • Dukto R6: Simple LAN file transfer tool.
    • Resilio Sync: Sync folders across devices using P2P technology (more complex setup).

    5. Use FTP Server

    Set up a simple FTP server on one machine (using FileZilla Server or Windows IIS FTP), and connect using an FTP client on the other.


    Summary Recommendation:

    For most users, Windows File Sharing is the best mix of ease and performance for local network file exchange. If you want something more immediate for smaller files, try Nearby Sharing.

    If you want detailed instructions on any method, just ask!

  3. User

    can i connect the 2 pcs together, through lan or usb or other means?

  4. Assistant

    Yes, you can connect two PCs directly for file sharing without going through a router, either via a network cable or other means. Here's how:

    1. Direct Ethernet (LAN) Connection

    Using an Ethernet cable:

    • Use a regular Ethernet cable (Cat5e or Cat6).
      • Modern network cards support Auto-MDI/MDIX, so you don’t need a special crossover cable.
    • Connect the two PCs directly using the Ethernet cable.
    • Manually assign static IP addresses to each PC’s Ethernet adapter:
      • On PC1: Set IP to something like 192.168.1.1 with subnet mask 255.255.255.0
      • On PC2: Set IP to 192.168.1.2 with subnet mask 255.255.255.0
    • Ensure both PCs are on the same workgroup (usually default is WORKGROUP).
    • Enable file sharing on both PCs.
    • You can now access shared folders by typing \\192.168.1.1 or \\192.168.1.2 in File Explorer.

    Pros: Fast (1 Gbps or more if supported), reliable.


    2. Using a USB Transfer Cable

    • Special USB-to-USB data transfer cables (sometimes called USB bridge cables) exist that have built-in electronics for safely connecting two PCs.
    • These are not regular USB charging/data cables; they have extra circuitry.
    • Comes with software that helps file transfer between two PCs directly over USB.
    • Example: Plugable USB 2.0 or 3.0 data transfer cables

    Note: You cannot connect two PCs using just a normal USB cable directly; this will damage hardware because USB ports are designed as host or device, not both at the same time without special cables.


    3. Other Options

    • Wi-Fi Direct or Ad Hoc Wi-Fi Network:

      • Create a direct wireless network between PCs without router.
      • Both PCs connect to this network to share files.
    • Thunderbolt / USB-C Cable (if available):

      • Some newer PCs support Thunderbolt networking or USB-C direct connections with appropriate cables and drivers.
      • Rare and more advanced setup.

    Summary

    MethodRequires Special Cable?SpeedDifficultyAdditional Notes
    Direct Ethernet cableNoUp to 1 Gbps+EasyAssign static IPs to both PCs
    USB Transfer CableYes (special cable)Depends on USBEasy (with cable + software)Do NOT use regular USB cable
    Wi-Fi Direct/Ad HocNoDepends on Wi-FiMediumSetup wireless direct network
    Thunderbolt / USB-CYes (appropriate cable)Very fastAdvancedRequires hardware & OS support

    If you want the fastest and easiest method, go with direct Ethernet connection with a regular cable and static IP setup. I can provide step-by-step instructions if you'd like!

  5. User

    if used Direct Ethernet cable and Assign static IPs to both PCs , would that affect their wifi connection to the interent through the router

  6. Assistant

    Great question!

    Using a direct Ethernet cable with static IPs assigned on the Ethernet adapters will NOT affect your PCs' Wi-Fi connection to the internet through the router, as long as you configure things properly.

    Here's why and how:

    • When both Wi-Fi and Ethernet adapters are connected and active, Windows will use its network adapter metric system to decide which network to prioritize for internet traffic.
    • Usually, the Wi-Fi adapter connected to the router retains internet access, while the direct Ethernet connection can be used solely for local file sharing between the two PCs.

    What to keep in mind:

    1. Assign static IPs only on the Ethernet adapters (the direct cable connection).
      For example:

      • PC1 Ethernet: 192.168.2.1 / 255.255.255.0
      • PC2 Ethernet: 192.168.2.2 / 255.255.255.0

      These IPs are on a different subnet than your router’s Wi-Fi network (usually 192.168.1.x or 192.168.0.x).

    2. Do NOT set a Default Gateway on the Ethernet adapters.
      Leave the Gateway field blank for these static IPs because you don’t want Windows to attempt to route internet traffic through the direct Ethernet connection.

    3. Verify network priority (if necessary).
      By default, Windows favors the connection with internet access. But if you want, you can check or adjust network metrics:

      • Go to Control Panel → Network and Sharing Center → Change adapter settings
      • Press Alt, go to Advanced → Advanced Settings
      • Set the Wi-Fi adapter to a higher priority than Ethernet (or adjust interface metric manually)

    In summary:

    • Wi-Fi continues to provide internet as usual.
    • Ethernet is only used as a separate local network for file exchange.
    • You get the best of both worlds — internet plus super-fast LAN file sharing between the two PCs.

    If you'd like, I can help with step-by-step instructions on configuring static IPs and verifying settings!

  7. User

    and if both are connect with lan cables to router, i'll get the same transfer speeds as when they connect directly?

  8. Assistant

    Great follow-up!

    If both PCs are connected to the router via LAN cables (Ethernet), will file transfer speeds be the same as when connected directly via an Ethernet cable?

    In most cases, yes, you will get very similar transfer speeds, often indistinguishable from a direct connection — but it depends on a few factors:


    How it works when connected through a router:

    • Most modern routers have a built-in network switch (usually 4 or more ports).
    • When both PCs are connected with LAN cables to the router's switch ports, the data between them is switched internally at wire speed (usually 1 Gbps on consumer gigabit routers).
    • This means the router acts as an unmanaged switch for local traffic between LAN ports.
    • The Ethernet packets don’t need to go out to the internet; they stay inside the local network switch.

    When will transfer speeds be the same or close?

    • If your router LAN ports are all Gigabit Ethernet (1 Gbps or higher).
    • If your PCs have Gigabit Ethernet network cards and cables are Cat5e or better.
    • If there’s no excessive network load on the router (no bottlenecks from CPU or busy traffic).

    When might the speeds differ?

    • If the router only supports 100 Mbps LAN ports → speed capped at 100 Mbps.
    • If the router is older and has a slower internal switch or CPU bottleneck, the transfer might be slower than a direct connection.
    • If the router has heavy traffic or QoS rules impacting performance, it could affect speeds.
    • If either PC has a 100 Mbps Ethernet card/cable, that will be the limiting factor.

    Compared to a direct Ethernet cable:

    • Direct connection is a dedicated link, simpler, no possible router overhead.
    • But for modern gigabit routers, the difference is typically negligible.
    • For bulk large file transfer, speeds are usually very close (e.g., ~100 MB/s for gigabit Ethernet).

    Summary

    Connection TypeSpeed PotentialNotes
    Direct PC-to-PC Ethernet cableFull gigabit or 10 Gbps (depending on NIC & cable)Dedicated connection, no router involvement
    Both PCs connected via routerUsually same as direct if router ports & hardware support gigabitData passes through router switch internally
    Router with 100 Mbps portsLimited to 100 MbpsSlower than direct gigabit connection

    Bottom line:

    For typical home or office gigabit routers, connecting both PCs via LAN cables to the router provides nearly identical file transfer speeds as a direct Ethernet connection.


    If you want to check your router model and ports, or your Ethernet adapter speeds, I can help you verify what speeds you should expect!

  9. User

    one of the pcs is old from 2012, it's a z620 workstation, how do i know if it's network card support Auto-MDI/MDIX

  10. Assistant

    The HP Z620 Workstation from around 2012 typically comes with a built-in Intel Gigabit network card (Intel 82579LM or similar), which supports Auto-MDI/MDIX.


    How to verify if your network card supports Auto-MDI/MDIX:

    1. Check Network Adapter Model:

    • On your Z620 PC:
      • Press Win + R, type devmgmt.msc, and press Enter to open Device Manager.
      • Expand Network adapters.
      • Locate your Ethernet adapter. Common Intel adapters on Z620 are:
        • Intel 82579LM Gigabit Network Connection
        • Or similar Intel Gigabit adapters.

    2. Look up adapter model specifications online:

    • Search for the exact model number (e.g., "Intel 82579LM specifications").
    • Intel 82579LM supports Auto-MDI/MDIX, meaning it can automatically detect and correct for crossover or straight-through cables.

    3. Alternatively, check driver properties for Auto-MDIX:

    • In Device Manager, right-click your network adapter → Properties → Advanced tab.
    • Look for a property named "Auto-MDIX", "MDI/MDIX Auto Detect", or something similar.
    • If present, toggle options or confirm it is enabled.

    What does this mean practically?

    • You can use a regular Ethernet cable (Cat5e or Cat6) directly connecting the two PCs without needing a special crossover cable.
    • The network adapter will automatically swap transmit and receive pairs as needed.

    Summary

    Workstation ModelTypical AdapterAuto-MDI/MDIX Support?
    HP Z620 (2012)Intel 82579LM or similar Intel GigabitYes

    If you want, I can guide you through checking this on your Z620 step-by-step. Just let me know!

  11. User

    i can find that property on neither pcs, maybe it's named differently

  12. Assistant

    It's common that on some network adapters or drivers the Auto-MDI/MDIX setting isn't explicitly shown or is named differently, or simply not exposed in the driver properties UI. Many modern NICs have it enabled by default and don't provide a manual toggle.


    What to do if you can't find an Auto-MDI/MDIX setting?

    1. Test with a regular Ethernet cable:

    • Simply use a standard (straight-through) Ethernet cable connecting the two PCs directly.
    • If the link lights on the network ports turn on (usually green/orange LEDs near the Ethernet jack) and you can ping between PCs or see each other on the network, then Auto-MDI/MDIX is working fine.
    • If it doesn't work, then either one or both NICs don't support Auto-MDI/MDIX and you might need a crossover cable or a switch/router between them.

    2. Check network connection status:

    • On each PC, after connecting the cable:
      • Open Command Prompt
      • Run ipconfig to ensure the Ethernet adapter is up with the static IP you configured.
      • Try pinging the other PC’s IP address (ping 192.168.x.x).
    • If ping works and you have link lights, the cable and adapters are communicating fine.

    3. If direct connection doesn't work:

    • Use a crossover Ethernet cable instead of a regular straight-through cable.
    • Alternatively, connect both PCs through a network switch or router (which handle MDI/MDIX internally), so you don't worry about cable types.

    Additional notes:

    • Most Intel, Realtek, Broadcom gigabit NICs from the last 10+ years have Auto-MDI/MDIX enabled and no user toggle.
    • If using Windows built-in drivers or manufacturer drivers, it's often managed automatically.
    • The absence of the setting in driver properties is normal, especially in built-in adapters.

    Summary:

    ScenarioWhat to do
    No Auto-MDI/MDIX setting visibleTest with regular cable first
    Direct cable connection worksAuto-MDI/MDIX is functioning
    Direct cable connection failsTry crossover cable or use switch/router

    If you want me to help with a quick connectivity test or how to ping between PCs, I can guide you step-by-step!

  13. User

    unfortunatly i don't have an extra cable to try now, should i get cat6 or 5

  14. Assistant

    For your use case—directly connecting two PCs or connecting PCs through a router/switch—either Cat5e or Cat6 Ethernet cable will work fine, but here’s a quick guide to help you choose:

    Should you get Cat5e or Cat6?

    FeatureCat5eCat6
    Max speed supportedUp to 1 Gbps (Gigabit Ethernet)Up to 10 Gbps (at shorter distances, up to 55 meters)
    Max bandwidth100 MHz250 MHz
    PriceUsually cheaperSlightly more expensive
    Cable thickness/flexibilityThinner, more flexibleThicker, stiffer
    Future-proofingGood for gigabit networksBetter for future 10 Gbps needs

    Recommendation:

    • If your network cards and router/switch support gigabit Ethernet (1 Gbps), Cat5e is sufficient and cost-effective.
    • If you want better future-proofing and possibly faster speeds down the road (assuming your hardware supports 10 Gbps), get Cat6.
    • For normal home/office use with a 1 Gbps network, Cat5e cables are the standard and work perfectly.

    Summary:

    • Either Cat5e or Cat6 will work for connecting two PCs directly or through a router.
    • Cat6 is better if you want extra bandwidth and future-proofing.
    • Cat5e is fine if budget is a concern and you have standard gigabit networking gear.

    If you want to keep it simple and cost-friendly, go with Cat5e. You can always upgrade cables later if you upgrade your hardware.


    Let me know if you want recommendations on where to buy quality cables or how to test your cable once you get it!

  15. User

    will cat6 work on 82579LM if it only supports 1gb

  16. Assistant

    Yes, Cat6 cable will work perfectly fine with the Intel 82579LM Gigabit Ethernet adapter, even though the adapter supports only up to 1 Gbps.


    Explanation:

    • The Intel 82579LM supports 10/100/1000 Mbps (Gigabit Ethernet).
    • Cat6 cables are backward compatible with Cat5e and support speeds from 1 Gbps all the way up to 10 Gbps (at shorter distances).
    • Using Cat6 cable does not force or require your NIC or switch/router to operate at 10 Gbps; the devices negotiate the highest mutually supported speed.
    • Think of the cable as “future-proof”—it can carry faster speeds if your hardware ever supports it, but it works perfectly with slower devices.

    Summary:

    Adapter SpeedCable TypeCompatibility
    Intel 82579LM 1 GbpsCat5e or Cat6Both fully compatible

    Bottom line:

    • You can safely use Cat6 cables with your 82579LM NIC.
    • No compatibility or speed issues; just better shielding and future-proofing from the cable.

    If you want, I can help recommend some good Cat6 cables or where to get them!

  17. User

    i noticed in network connections there is 82579LM and 82574L ethernet , what's that

  18. Assistant

    Good observation! The presence of both Intel 82579LM and Intel 82574L Ethernet adapters on your HP Z620 workstation is quite typical because the Z620 is often equipped with two separate Gigabit Ethernet ports, each using a different Intel network chip.


    Explanation of the two NICs:

    AdapterDescriptionTypical Use on Z620
    Intel 82579LMGigabit Ethernet controller, integrated in many HP business-class systems. Supports 10/100/1000 Mbps speeds.Usually the onboard primary Ethernet port; integrated into the motherboard in many cases.
    Intel 82574LAnother Gigabit Ethernet controller, popular for server and workstation NICs, also supports 10/100/1000 Mbps.Usually a second independent Ethernet port (either onboard or on a riser/add-in card).

    Why two different Ethernet adapters?

    • The HP Z620 workstation comes with two gigabit Ethernet ports, often for redundancy, load balancing, or connecting to different networks.
    • Each port uses a slightly different Intel NIC model.
    • Both support Auto-MDI/MDIX, Gigabit speeds, and standard wired Ethernet features.
    • Drivers for both adapters are usually included with the workstation or Windows automatically installs them.

    What does this mean for you?

    • You have two physical Ethernet ports you can use independently or together.
    • You can connect one PC cable into 82579LM port and the other into 82574L port if desired (e.g., for different networks or direct connection).
    • Both support gigabit speeds, so either port is fine for direct cable connection or connecting to a router.

    How to identify which physical port corresponds to which adapter?

    • You can disable one adapter in Network Connections and see which Ethernet port's link light goes off.
    • Or plug a cable into each port separately and watch the adapter status in Windows.

    If you want, I can help you figure out port mapping or configure settings for either or both NICs!

  19. User

    I'll have to buy a network cable first to try. I remember trying to share files using administrative share in windows through wifi and it was such a hassle and didn't wanna work , eventually after changing some stuff and making connections as private on both , it only worked 1 way (access a from b, not b from a ) and it was too slow , much much slower than expected

  20. Assistant

    What you're describing is a pretty common experience with Windows file sharing over Wi-Fi — it can be tricky to set up properly, and Wi-Fi speeds (especially on older hardware or congested networks) are often much slower than wired Ethernet.


    Why wired Ethernet is better for file sharing in your case:

    • Faster and more stable speeds: Gigabit Ethernet consistently delivers up to ~100 MB/s, whereas Wi-Fi speeds fluctuate due to interference, distance, and bandwidth limitations.
    • Simpler and more reliable setup: On a wired network, sharing permissions and connectivity typically behave more predictably.
    • Better network isolation: You can directly connect two PCs or use a router switch port for file sharing without worrying much about wireless security profiles or signal issues.

    A few tips to simplify Windows sharing setup once you’re ready with your cable:

    1. Set both PCs' network types to "Private":

      • This enables network discovery and sharing by default.
      • You can change this in Settings > Network & Internet > (Wi-Fi or Ethernet) > Network Profile > Private.
    2. Enable File and Printer Sharing and Network Discovery:

      • Control Panel > Network and Sharing Center > Advanced sharing settings
      • Turn on both “Network discovery” and “File and printer sharing”.
    3. Use user accounts with passwords:

      • Windows prefers using password-protected sharing.
      • Make sure you’re connecting to the right user account on the other PC.
    4. Check Windows Defender Firewall or other firewalls:

      • Make sure rules for “File and Printer Sharing” are enabled on private networks.
      • Sometimes, temporarily disabling firewalls can help test connectivity.
    5. Use HOSTNAME or IP address to connect:

      • Use \\PC-NAME or \\192.168.x.x in the File Explorer address bar.
      • Using IP addresses sometimes avoids name resolution issues.
    6. For administrative shares (C$, D$):

      • You need to connect with an account that has administrative privileges.
      • Administrative shares can be blocked by some security policies; sometimes simpler to create a new shared folder with explicit permissions.

    Why the Wi-Fi share might have been slow:

    • Wi-Fi speeds depend on router, interference, distance, and Wi-Fi standard (802.11n, ac, ax).
    • Older Wi-Fi adapters or routers may max out well below 100 Mbps.
    • Wireless can have retransmissions due to interference, reducing effective throughput.

    When you try a direct Ethernet connection:

    • Speeds should jump significantly — closer to 800-950 Mbps throughput on gigabit cards.
    • Setup should also be simpler and less prone to weird issues caused by firewall or Wi-Fi profiles.

    Summary:

    Get a Cat5e or Cat6 cable, connect the two PCs directly or via the router Ethernet ports, assign static IPs if connecting directly, and set network profiles to Private on both PCs. Then set up sharing using normal shared folders (not admin shares) for easier and more reliable file sharing.


    If you want, I can send you a step-by-step checklist or troubleshoot the Wi-Fi sharing issues you had — but honestly, wired is the better way for speed and stability. Just let me know!

  21. User

    what's the expected transfer speeds on 1gigs

  22. Assistant

    When transferring files over a 1 Gigabit Ethernet (1 Gbps) connection, you can expect real-world data transfer speeds as follows:

    Theoretical maximum:

    • 1 Gbps = 1,000 Megabits per second
    • Convert to Megabytes: 1,000 Mbps ÷ 8 = 125 MB/s (Megabytes per second)

    Realistic expected speeds in practice:

    • Typical file transfer rates: ~80 to 115 MB/s
    • Depends on factors like:
      • Drive speed (HDD vs SSD)
      • Network adapter & driver efficiency
      • Protocol overhead (TCP/IP, SMB)
      • Cable quality and length
      • CPU load during transfer

    Examples:

    Storage TypeTypical Transfer Speed over 1 Gbps Network
    Mechanical HDD (on source & destination)80 - 100 MB/s (often limited by disk speed)
    SSD (modern SATA or NVMe)100 - 115+ MB/s (limited by network overhead)
    Mixed (HDD to SSD or vice versa)Speeds closer to slower drive speed

    Why not full 125 MB/s?

    Network protocols (TCP/IP, SMB) have overhead, and disks need time to read/write data. This reduces the "benchmarked" max speed slightly.


    Summary:

    MetricValue
    Gigabit Ethernet bandwidth1 Gbps (1,000 Mbps)
    Theoretical max throughput~125 MB/s
    Typical real-world throughput80 - 115 MB/s (depends on hardware)

    If you want to test your actual transfer speeds, once your cables are set up, you can use tools like:

    • Windows built-in file copy (just drag and drop or copy-paste large files)
    • iperf3 (network speed testing tool)
    • LAN Speed Test (third-party GUI tool for LAN transfer speed)

    Let me know if you want guidance on testing transfers or optimizing speeds!

  23. User

    i tried iperf-3.18-win64.exe to check network speed , when i double clicked it opened cmd for a split second and closed it (I am worried something happened to my system, or a service is still running in the background). I checked the github readme it says for TCP Download iperf3.exe -c -P 10 -4 -R, so i opened cmd again , cd directory of iperf3.exe , then ran the command perf3.exe -c -P 10 -4 -R and it said The system cannot find the file specified.

  24. Assistant

    It looks like you're encountering two issues:

    1. Double-clicking iperf-3.18-win64.exe just flashes a command prompt window and closes it immediately.
    2. When you try to run the iperf command manually, you get an error The system cannot find the file specified.

    Explanation & How to Properly Use iperf3 on Windows

    iperf3 is a command-line tool, so double-clicking the .exe will just run it without arguments and exit immediately.

    To properly test network speed with iperf3, you need two machines:

    • One acts as the server (ipfer3 runs in server mode)
    • The other acts as the client (iperf3 runs in client mode and connects to the server)

    Step-by-step instructions:


    Step 1: Open a Command Prompt in the folder where iperf3.exe is located

    • Press Win + R, type cmd, press Enter.

    • In the command window, navigate to the folder containing iperf3.exe. For example:

      cd C:\path\to\iperf3-folder
      

    Step 2: Start iperf3 in server mode on one PC

    Run:

    iperf3.exe -s
    

    This will start iperf3 in server mode, listening for incoming connections.

    Leave this window open.


    Step 3: Run iperf3 client on the other PC

    On the second PC, open Command Prompt and navigate to the iperf3.exe folder.

    Then run:

    iperf3.exe -c <server-ip> -P 10 -4 -R
    

    Replace <server-ip> with the actual IPv4 address of the PC running the iperf server.

    • -c indicates client mode and target server IP
    • -P 10 runs 10 parallel client streams for better utilization
    • -4 forces IPv4
    • -R reverses the test direction (download test from server to client)

    Important notes:

    • Make sure firewall on the server PC allows iperf3, or temporarily disable firewall for testing.
    • The system cannot find the file specified usually means:
      • You mistyped the command or iperf3.exe
      • You are not in the folder where iperf3.exe is located
      • Or you have a typo (perf3.exe instead of iperf3.exe)

    Double check the executable’s name and your command line.


    Example working commands:

    • On PC 1 (server):
    iperf3.exe -s
    
    • On PC 2 (client):
    iperf3.exe -c 192.168.1.10 -P 10 -4 -R
    

    (replace 192.168.1.10 with your server PC's IP)


    If you want a quick test on one PC (loopback):

    You can run server in one cmd window:

    iperf3.exe -s
    

    In another window on the same PC (while server is running):

    iperf3.exe -c 127.0.0.1
    

    This tests local loopback speed (useful for diagnosing).


    Summary

    • Don’t double-click iperf3.exe — run it from the command line with proper parameters
    • Start iperf3 in server mode on one PC
    • Connect from the other PC in client mode with the correct IP
    • Check firewall settings if connection fails

    If you want, I can help you prepare exact commands and firewall exceptions! Just tell me.

  25. User

    maybe after i buy the cable, testing wifi is useless. i have a question , if i connect 2 pcs through the ethernet cable , i can share internet connection from 1 of them, right. would that affect the security of file transfer

  26. Assistant

    Yes, you can share the internet connection from one PC to the other when they are directly connected via an Ethernet cable. This feature is called Internet Connection Sharing (ICS) on Windows.


    How Internet Connection Sharing (ICS) works in your setup:

    • Suppose PC1 is connected to the internet via Wi-Fi.
    • You connect PC1 and PC2 directly with an Ethernet cable.
    • On PC1, you enable ICS on the Wi-Fi adapter, specifying the Ethernet adapter as the shared network.
    • PC2 receives internet access through PC1’s Ethernet connection.

    Does sharing internet this way affect file transfer security between PCs?

    • Net effect on file transfer security:

      • Local file sharing (SMB, shared folders) over the Ethernet link itself is still local and direct.
      • ICS simply routes internet traffic from PC2 through PC1; it does not inherently encrypt or expose file sharing.
      • File shares use Windows network permissions and firewall rules as usual.
    • Security considerations:

      • Since PC2 routes internet through PC1, PC1 acts like a gateway and firewall for PC2’s internet traffic.
      • ICS uses NAT (Network Address Translation), so PC2 is behind PC1’s IP.
      • The file sharing security depends on:
        • Proper network sharing settings (use Private network profiles)
        • User permissions on shared folders
        • Firewalls configured properly on both PCs
      • ICS itself does not weaken or strengthen SMB security; it just enables internet access for PC2.

    Additional points:

    • If both PCs are configured as Private networks, and file/folder-sharing permissions are correct, then enabling ICS won’t expose your files beyond this small local network.
    • The Ethernet connection is direct (or via switch/router if used), so the file transfer is still local and fast.
    • Your main security controls remain Windows file sharing permissions, passwords, and firewall rules.

    Summary:

    AspectEffects with ICS
    File sharing securityNo inherent security risk introduced
    Internet sharingPC2 gains internet access via PC1
    Network complexitySlightly more complex, but manageable
    Firewall & permissionsStill crucial to configure correctly

    Bonus tip:

    Consider enabling Windows Defender Firewall’s private network settings and only sharing folders with careful user permissions to avoid accidental exposure.


    If you want, I can guide you step-by-step to set up ICS safely and configure file sharing properly!

  27. User

    is it safer to connect directly or through the router?. it's just the router is provided from the ISP with their configurations and some of them are greyed out, when i connect to the router 192.168.1.1 I always get a warning that my connection is not secure

  28. Assistant

    Great question! Considering your concerns about security and router restrictions, here’s a breakdown of direct Ethernet connection vs. connecting through the ISP-provided router regarding safety and control:


    1. Direct PC-to-PC Ethernet Connection (No Router)

    Pros:

    • More isolated environment: Since it’s a direct cable connection, only these two PCs are on that network segment.
    • No dependency on potentially limited or “greyed out” router settings.
    • Simpler network with fewer devices involved → less surface for attacks.
    • You fully control IP addressing and sharing settings on these two machines.

    Cons:

    • No direct internet sharing unless you configure ICS (Internet Connection Sharing) on one PC.
    • Internet traffic from PC2 has to route through PC1, which may be less convenient or slightly less stable.
    • No hardware firewall or NAT device between PCs, so both PCs can directly see each other.

    2. Connecting Both PCs to the ISP Router

    Pros:

    • Internet access is uniform and simplified for both PCs.
    • The router usually acts as a firewall/NAT device protecting your network from external attacks.
    • The router manages DHCP and IP assignments automatically, reducing setup steps.

    Cons:

    • Your control is limited if ISP router settings are locked down with greyed-out options.
    • Router web interface showing "connection not secure" means the router’s web UI uses HTTP (not HTTPS) or has a self-signed certificate; it doesn’t directly affect your LAN security but indicates outdated/router firmware or UI design.
    • Potentially more devices on the network → increased attack surface (other devices, IoT gadgets, etc.).
    • Slower internal transfers if Wi-Fi used instead of wired LAN ports on the router.

    Security-wise — Which is safer?

    AspectDirect Ethernet ConnectionRouter Connection
    Exposure to external networkNo external exposure (unless ICS enabled to share internet)Router offers firewall/NAT: blocks inbound unsolicited traffic
    Control over network environmentFull control, minimal devicesLimited by ISP router settings
    Internal traffic visibilityDirect peer-to-peer, fully visibleWithin LAN, but isolated by router's hardware
    Risk from router compromiseNone (no router in path)Possible if ISP router is insecure or compromised

    Your router warning about "connection not secure":

    • This warning usually appears when you access the router’s administration page via HTTP instead of HTTPS, or if the router uses a self-signed SSL certificate.
    • It doesn’t mean your actual internet connection or local network is insecure; just that the router’s web interface is not served over a trusted encrypted connection.
    • You can usually safely ignore this warning when accessing your own router UI, or you can try:
      • Using http://192.168.1.1 instead of https://192.168.1.1 (some routers don’t use HTTPS).
      • Updating the router firmware if updates are available.
      • Replacing the router with one you control if you want better security and features.

    My recommendation:

    • For fast, simple, and secure file transfers, a direct wired Ethernet connection between the two PCs is best.
    • If you want both PCs connected to the internet, you can share the connection via ICS on one PC, or connect both PCs to the router with Ethernet cables.
    • If the ISP router settings are restrictive and you worry about security, consider:
      • Using the direct link plus ICS.
      • Or replacing the router with a third-party device you control (if possible).

    If you want help with:

    • Setting up a direct connection and ICS safely.
    • Diagnosing or improving your current router setup.
    • Replacing the router or configuring your network more securely.

    Just ask!

  29. User

    it does use https://192.168.1.1 , and when i click more info it shows certificate verified by ZTE , i don't know why it shows connection not secure, i even had to make an exception in bitdefender to connect

  30. Assistant

    What you're seeing is very common with ISP-provided routers, especially ones from manufacturers like ZTE. Here's what's going on:

    Why the "Connection Not Secure" Warning Happens

    • The router’s HTTPS interface uses a self-signed SSL/TLS certificate or a certificate signed by the manufacturer's own CA (Certificate Authority), such as "ZTE" in your case.
    • Your browser does not recognize this CA as trusted by default, so it warns you that the connection is not fully secure.
    • Even though the connection is encrypted, the browser cannot fully verify the authenticity of the certificate.
    • That's why you had to make an exception in Bitdefender and likely in your browser too.

    What it means for your security and network:

    • The warning is about the trustworthiness of the router's web interface certificate, not about your actual internet connection or LAN security.
    • The data you send to the router's interface (passwords, settings) is still encrypted (not sent in plain text) via HTTPS.
    • The risk is mainly that someone on the local network could potentially do a "man-in-the-middle" attack if they spoof that router IP and serve a fake certificate.
    • It's generally safe to proceed with the exception if you trust the router and your local network.

    Can you fix this?

    • Usually, you cannot replace or install a trusted certificate in ISP-supplied routers, as they don’t expose that option.
    • Sometimes firmware updates improve this, but many ISP devices never get updates.
    • You can replace the router with a third-party router where you can install a trusted or your own certificate. But this requires ISP compatibility and setup.

    What to do:

    • Keep making the exception in your antivirus and browser for your router's IP if you want to administer it.
    • Avoid accessing the router interface from untrusted/public networks.
    • Use strong admin passwords on the router.
    • Disable remote management over WAN if enabled.
    • Consider getting your own router for better security control (if your ISP allows).

    Summary:

    IssueExplanationSuggested Action
    Connection Not SecureRouter uses self-signed or manufacturer certMake exceptions locally, generally safe on trusted LAN
    CA Not TrustedBrowser does not recognize router CANo easy fix on ISP router
    RiskPossible MITM only on compromised LANUse strong passwords, disable remote access
    FixFirmware updates (rare), replace routerOptional: buy own router when possible

    If you want, I can help you check if remote management is disabled, or guide you on setting up your own router behind the ISP’s modem/router to regain full control and avoid this issue. Just ask!