in ebian virtualbox is still starting up continuesly opening a lot of terminals
- User
in ebian virtualbox is still starting up continuesly opening a lot of terminals
- Assistant
It sounds like your Debian VM in VirtualBox is stuck in a loop where it keeps opening terminals repeatedly on startup. This can happen for a few reasons. I'll suggest some troubleshooting steps to help you diagnose and fix the issue:
Possible Causes
-
Misconfigured Startup Scripts
A startup script (like.bashrc,.profile,.bash_profile, or a script in/etc/init.d/or systemd services) may be launching terminals in a loop. -
Automatic Terminal Launcher in Desktop Environment
Your desktop environment or window manager might be configured to launch terminals on startup continuously. -
Corrupted or Incorrect Configuration Files
Some config files may be corrupted or hold incorrect commands that start terminals repeatedly. -
Malicious / Infinite Loop Script
Steps to Diagnose and Fix
1. Boot into a Non-GUI / Safe Mode
- When the VM starts, access the GRUB menu by pressing Shift or Esc after powering on.
- Select Advanced options and then boot into recovery mode or boot into a multi-user text target by adding
systemd.unit=multi-user.targetto the kernel boot line:- When GRUB menu shows, press
eto edit the boot entry. - Find the line starting with
linuxand addsystemd.unit=multi-user.targetat the end. - Press Ctrl+X or F10 to boot.
- When GRUB menu shows, press
This will boot the system into a console interface only (no GUI).
2. Check for scripts launching terminals
- Look at files like
~/.bashrc,~/.profile,~/.bash_profile:
cat ~/.bashrc cat ~/.profile cat ~/.bash_profileLook for any lines that execute
xterm,gnome-terminal,konsole, or similar.If you find them, comment out or remove those lines.
- Check
/etc/xdg/autostart/and~/.config/autostart/for any.desktopfiles launching terminals.
3. Check Desktop Environment Startup Applications
If you can get into GUI safely later, check your DE's startup applications and disable any terminal launching entries.
4. Check if any shell login loops
Sometimes misconfigured
.bashrcor.bash_profileinvoke themselves recursively.Make sure there are no lines like:
bashor starting new shells recursively.
5. Remove or Rename Problematic Startup Files Temporarily
If unsure, rename your
.bashrcand.profileto back them up:mv ~/.bashrc ~/.bashrc.backup mv ~/.profile ~/.profile.backup mv ~/.bash_profile ~/.bash_profile.backupand reboot.
6. Review recent changes
Did you recently edit any startup scripts, or install packages that modify startup behavior (e.g., terminal multiplexers)?
Additional Suggestion: Reinstall or Reset VirtualBox Guest Additions
Sometimes guest additions or integration cause problems. Reinstall or update guest additions after you fix the startup issue.
If you want, feel free to share the contents of your
.bashrcor other configs to take a look.
Let me know what you find or if you want detailed help with any step.
-
- User
at ~/.profile cat ~/.bash_profile
~/.bashrc: executed by bash(1) for non-login shells.
see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
for examples
If not running interactively, don't do anything
case $- in i) ;; *) return;; esac
don't put duplicate lines or lines starting with space in the history.
See bash(1) for more options
HISTCONTROL=ignoreboth
append to the history file, don't overwrite it
shopt -s histappend
for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000 HISTFILESIZE=2000
check the window size after each command and, if necessary,
update the values of LINES and COLUMNS.
shopt -s checkwinsize
If set, the pattern "**" used in a pathname expansion context will
match all files and zero or more directories and subdirectories.
#shopt -s globstar
make less more friendly for non-text input files, see lesspipe(1)
#[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
set variable identifying the chroot you work in (used in the prompt below)
if [ -z "{debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then debian_chroot=(cat /etc/debian_chroot) fi
set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in xterm-color|*-256color) color_prompt=yes;; esac
uncomment for a colored prompt, if the terminal has the capability; turned
off by default to not distract the user: the focus in a terminal window
should be on the output of commands, not on the prompt
#force_color_prompt=yes
if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi
if [ "{debian_chroot:+(debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\ ' else PS1='{debian_chroot:+(debian_chroot)}\u@\h:\w$ ' fi unset color_prompt force_color_prompt
If this is an xterm set the title to user@host:dir
case "{debian_chroot:+(debian_chroot)}\u@\h: \w\a\]PS1" ;; *) ;; esac
enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto'
#alias grep='grep --color=auto' #alias fgrep='fgrep --color=auto' #alias egrep='egrep --color=auto'fi
colored GCC warnings and errors
#export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01'
some more ls aliases
#alias ll='ls -l' #alias la='ls -A' #alias l='ls -CF'
Alias definitions.
You may want to put all your additions into a separate file like
~/.bash_aliases, instead of adding them here directly.
See /usr/share/doc/bash-doc/examples in the bash-doc package.
if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi
enable programmable completion features (you don't need to enable
this, if it's already enabled in /etc/bash.bashrc and /etc/profile
sources /etc/bash.bashrc).
if ! shopt -oq posix; then if [ -f /usr/share/bash-completion/bash_completion ]; then . /usr/share/bash-completion/bash_completion elif [ -f /etc/bash_completion ]; then . /etc/bash_completion fi fi
~/.profile: executed by the command interpreter for login shells.
This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
exists.
see /usr/share/doc/bash/examples/startup-files for examples.
the files are located in the bash-doc package.
the default umask is set in /etc/profile; for setting the umask
for ssh logins, install and configure the libpam-umask package.
#umask 022
if running bash
if [ -n "BASH_VERSION" ]; then # include .bashrc if it exists if [ -f "HOME/.bashrc" ]; then . "$HOME/.bashrc" fi fi
set PATH so it includes user's private bin if it exists
if [ -d "HOME/bin:$PATH" fi
set PATH so it includes user's private bin if it exists
if [ -d "HOME/.local/bin:$PATH" fi
- Assistant
Thanks for sharing your
.bash_profile. From what I see, it appears to be the default, standard Debian one, and does not contain anything that would cause multiple terminal windows to open or cause a loop.Since
.bash_profilelooks clean, let's check a few other common places that might cause terminals to spawn repeatedly on startup:
Next things to check:
1. Check
~/.bashrcThis file is also executed for non-login shells and could start terminal emulators or run commands causing new terminals to open. Run:
cat ~/.bashrcand look for commands that might launch terminals—like
xterm,gnome-terminal,konsole,xfce4-terminal, or any custom scripts that might open terminals.
2. Check your Desktop Environment's auto-start entries
If your DE is launching terminals repeatedly at startup, check the autostart configuration files:
ls ~/.config/autostart ls /etc/xdg/autostartCheck the
.desktopfiles here for any terminal launchers.
3. Search for terminal commands invoked at startup
Run this to find if terminal programs are referenced in common config or autostart locations:
grep -r -E '(xterm|gnome-terminal|konsole|terminal)' ~/.config ~/.local /etc/xdg
4. Check if your systemd user services might launch terminals
Run (inside the VM):
systemctl --user list-units --type=serviceIf you see anything suspicious (like a service starting a terminal emulator), disable it.
5. Check your window manager or DE startup settings
Depending on which desktop environment you're using (GNOME, KDE, XFCE, etc.):
- For XFCE, check "Session and Startup" > "Application Autostart"
- For GNOME, check "Startup Applications" via
gnome-session-properties - For KDE, check "System Settings" > "Startup and Shutdown" > "Autostart"
Look for any terminal or shell entries and disable them.
6. Temporarily move
.xinitrcand.xsessionif they existSometimes these files launch terminal emulators. Check if these exist:
ls -la ~/.xinitrc ~/.xsessionIf yes, move them:
mv ~/.xinitrc ~/.xinitrc.backup mv ~/.xsession ~/.xsession.backup
7. Identify if a script or process is spawning terminals continuously
Run this (after booting or booting into non-GUI mode, then starting the GUI manually):
ps aux | grep -E 'xterm|gnome-terminal|konsole|xfce4-terminal|terminal'Look which process is the parent of these terminal windows, to see if something is looping.
If none of the above identifies the problem:
Try creating a new user (which will start with clean settings) to see if the problem persists:
sudo adduser testuserThen login as
testuserin the VM. If terminals open normally (just one terminal or the desktop opens fine), it likely means your user config is causing the problem.
Summary
.bash_profileseems clean.- Check
.bashrcand other shell startup files. - Check autostart
.desktopfiles. - Search configs for terminal launch commands.
- Disable suspicious startup services or entries.
- Try a clean user.
If you'd like, you can share your
~/.bashrc, output fromls ~/.config/autostart, or any relevant files, and I can take a look.Happy to help you narrow this down!
- User
see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
for examples
If not running interactively, don't do anything
case $- in i) ;; *) return;; esac
don't put duplicate lines or lines starting with space in the history.
See bash(1) for more options
HISTCONTROL=ignoreboth
append to the history file, don't overwrite it
shopt -s histappend
for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000 HISTFILESIZE=2000
check the window size after each command and, if necessary,
update the values of LINES and COLUMNS.
shopt -s checkwinsize
If set, the pattern "**" used in a pathname expansion context will
match all files and zero or more directories and subdirectories.
#shopt -s globstar
make less more friendly for non-text input files, see lesspipe(1)
#[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
set variable identifying the chroot you work in (used in the prompt below)
if [ -z "{debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then debian_chroot=(cat /etc/debian_chroot) fi
set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in xterm-color|*-256color) color_prompt=yes;; esac
uncomment for a colored prompt, if the terminal has the capability; turned
off by default to not distract the user: the focus in a terminal window
should be on the output of commands, not on the prompt
#force_color_prompt=yes
if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi
if [ "{debian_chroot:+(debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\ ' else PS1='{debian_chroot:+(debian_chroot)}\u@\h:\w$ ' fi unset color_prompt force_color_prompt
If this is an xterm set the title to user@host:dir
case "{debian_chroot:+(debian_chroot)}\u@\h: \w\a\]PS1" ;; *) ;; esac
enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto'
#alias grep='grep --color=auto' #alias fgrep='fgrep --color=auto' #alias egrep='egrep --color=auto'fi
colored GCC warnings and errors
#export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01'
some more ls aliases
#alias ll='ls -l' #alias la='ls -A' #alias l='ls -CF'
Alias definitions.
You may want to put all your additions into a separate file like
~/.bash_aliases, instead of adding them here directly.
See /usr/share/doc/bash-doc/examples in the bash-doc package.
if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi
enable programmable completion features (you don't need to enable
this, if it's already enabled in /etc/bash.bashrc and /etc/profile
sources /etc/bash.bashrc).
if ! shopt -oq posix; then if [ -f /usr/share/bash-completion/bash_completion ]; then . /usr/share/bash-completion/bash_completion elif [ -f /etc/bash_completion ]; then . /etc/bash_completion fi fi
- Assistant
Thanks for sharing your
~/.bashrccontent. This also looks like the standard default Debianbashrcfile without anything suspicious—no commands launching terminals or loops.
Since your
~/.bash_profileand~/.bashrclook fine, the repeated opening of multiple terminal windows on startup is probably caused by something else in the system or user environment.Next troubleshooting steps:
1. Check ~/.bash_aliases
Since your
.bashrcsources~/.bash_aliasesif it exists, check if that file contains commands that open terminals repeatedly:cat ~/.bash_aliasesIf there is anything launching terminals or loops, comment it out.
2. Check ~/.config/autostart and /etc/xdg/autostart
List the contents:
ls ~/.config/autostart ls /etc/xdg/autostartLook inside any
.desktopfiles that seem suspicious. You can view contents like this:cat ~/.config/autostart/filename.desktopor
cat /etc/xdg/autostart/filename.desktopSearch for any commands that start terminals.
3. Look for terminal commands in autostarts (whole user config)
Run:
grep -rE 'xterm|gnome-terminal|konsole|terminal' ~/.config ~/.local /etc/xdg
4. Check window manager / DE session startup programs
Identify your desktop environment (e.g., GNOME, XFCE, KDE):
echo $XDG_CURRENT_DESKTOPBased on this, use the DE's startup application manager GUI to see if any terminal apps are set to autostart.
If you cannot open GUI safely because terminals open endlessly, boot to a non-GUI mode (see below) and disable these entries by removing autostart files or editing configs.
5. Boot into multi-user.target (non-GUI) to debug
To safely troubleshoot:
- Reboot and at GRUB menu, press
eon the Debian entry. - Find the line starting with
linux, append at the end:
systemd.unit=multi-user.target- Press Ctrl+X or F10 to boot.
This boots to a text-only console.
6. Check running processes of terminals (while you see multiple terminals opening)
Run:
ps -ef --forest | grep -E '(xterm|gnome-terminal|konsole|terminal)'Look for parents of terminal processes to identify what's spawning them.
7. Check systemd user timers/services
List user services:
systemctl --user list-units --type=service --allDisable suspicious ones:
systemctl --user disable service-name.service systemctl --user stop service-name.service
8. Try a new user account
Add a new user:
sudo adduser testuserLogin as
testuserafter reboot. Does the problem happen there? If no, problem is definitely in your user config.
Summary
- Check
~/.bash_aliasesfor terminal-launch commands. - Check autostart
.desktopfiles. - Identify DE and check its startup applications.
- Inspect running processes to find what spawns terminals.
- Try with a new user to isolate user config problem.
If you want me to review any files or outputs from commands above, just paste here and I'll help!
- Reboot and at GRUB menu, press
- User
is it possible that virtuabox is launching them as it starts every time automaticaly and cannot stop it?
- Assistant
VirtualBox itself does not automatically launch multiple terminal windows inside a guest VM on its own. VirtualBox’s job is to run the VM and provide virtual hardware: it does not control processes or windows inside the guest OS.
However, related scenarios where VirtualBox might appear involved:
-
VirtualBox Guest Additions / Shared Folders or Clipboard Integration:
Sometimes if Guest Additions are misconfigured or corrupted, strange behavior (including unexpected popups or processes) can happen in the guest. But repetitive terminals opening is unusual for this. -
VirtualBox Startup Scripts on Host Running Multiple VM Consoles:
Outside the guest, on the host OS, if you have a script launching multipleVBoxManageconsole windows or VBox headless VM sessions with consoles, you might see multiple terminal windows on the host — but this would be external to the VM. -
VirtualBox VM Auto-boot Configuration:
You might have configured the VM to run in “headless” or “detached” mode, and then run commands on the host that open terminals. But again, this is on the host, not inside the guest. -
Some misconfiguration inside the VM startup/login scripts:
If some startup script inside the guest (like an.xinitrc,.xsession, DE autostart, or shell profile) tries to launch terminals infinitely, it will continue indefinitely inside the VM — and would seem like VirtualBox is causing it, but it's really the guest OS’s internal environment.
What you can do to confirm and isolate this:
-
Run the VM without GUI (headless mode) using VirtualBox manager or command line:
VBoxManage startvm "YourDebianVM" --type headlessThis will start the VM without any GUI window on the host.
-
SSH into the VM (if installed and configured), then check running processes there and see if many terminals are running.
-
Boot the VM into multi-user.target (text only) as I described earlier, to get a shell inside the guest with no desktop environment starting. See if the terminals still spawn; if not, the issue is definitely in the graphical environment of the guest.
Summary
- VirtualBox itself does NOT launch terminals inside the guest.
- The repeated terminal windows opening must be caused by something inside the guest OS startup scripts, autostart files, or desktop environment configuration.
- Boot into text mode (non-GUI) to troubleshoot.
- Try headless boot to eliminate host-related GUI issues.
Feel free to share if you want help on exact commands for any of these steps!
-