// 1 function hcyl(bottom, height, radius, id) { let radsq = radius * radius let…
- User
// 1 function hcyl(bottom, height, radius, id) { let radsq = radius * radius let innerRadsq = (radius - 1.2) * (radius - 1.2) height += bottom for (let x = -radius; x <= radius; x++) { for (let y = bottom; y < height; y++) { for (let z = -radius; z <= radius; z++) { let d = x * x + z * z if (d < radsq && d >= innerRadsq) { world.setBlock(p2.x + x, p2.y + y, p2.z + z, id) } } } } }
function cyl(bottom, height, radius, id) { let radsq = radius * radius height += bottom for (let x = -radius; x <= radius; x++) { for (let y = bottom; y < height; y++) { for (let z = -radius; z <= radius; z++) { let d = x * x + z * z if (d < radsq) { world.setBlock(p2.x + x, p2.y + y, p2.z + z, id) } } } } }
function cube(bottom, height, radius, id) { let radsq = radius * radius height += bottom for (let x = -radius; x <= radius; x++) { for (let y = bottom; y < height; y++) { for (let z = -radius; z <= radius; z++) { let d = x + z if (d < radsq) { world.setBlock(p2.x + x, p2.y + y, p2.z + z, id) } } } } }
function sphereoid(w, h, d, id) { let w2 = w * w let h2 = h * h let d2 = d * d let w3 = (w - 1.5) * (w - 1.5) let h3 = (h - 1.5) * (h - 1.5) let d3 = (d - 1.5) * (d - 1.5)
for (let y = -h; y < h; y++) { for (let x = -w; x <= w; x++) { for (let z = -d; z <= d; z++) { let n = x * x / w2 + y * y / h2 + z * z / d2 let n2 = x * x / w3 + y * y / h3 + z * z / d3 if (n < 1 && n2 >= 1) { world.setBlock(p2.x + x, p2.y + y, p2.z + z, id) } } } }}
function sleep(ms) { return new Promise(resolve => setTimeout(() => resolve(), ms)) }
async function asphereoid(w, h, d, id) { let px = p2.x let py = p2.y let pz = p2.z let w2 = w * w let h2 = h * h let d2 = d * d let w3 = (w - 1.5) * (w - 1.5) let h3 = (h - 1.5) * (h - 1.5) let d3 = (d - 1.5) * (d - 1.5)
for (let y = -h; y < h; y++) { for (let x = -w; x <= w; x++) { for (let z = -d; z <= d; z++) { let n = x * x / w2 + y * y / h2 + z * z / d2 let n2 = x * x / w3 + y * y / h3 + z * z / d3 if (n < 1 && n2 >= 1) { world.setBlock(px + x, py + y, pz + z, id) await sleep(10) } } } }}
function cloneBlock(sx, sy, sz, dx, dy, dz, w, h, l) { for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { let block = world.getBlock(sx + x, sy + y, sz + z); world.setBlock(dx + x, dy + y, dz + z, block); } } } }
function duplicateBlock(sx, sy, sz, dx, dy, dz, w, h, l, offsetX, offsetY, offsetZ, num) { for (let i = 0; i < num; i++) { cloneBlock(sx, sy, sz, dx + offsetX * i, dy + offsetY * i, dz + offsetZ * i, w, h, l); } }
function rotateBlock(sx, sy, sz, dx, dy, dz, w, h, l, angle) { let rad = angle * (Math.PI / 180); let sin = Math.sin(rad); let cos = Math.cos(rad);
for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { let nx = Math.round(x * cos - z * sin); let nz = Math.round(x * sin + z * cos); let block = world.getBlock(sx + x, sy + y, sz + z); world.setBlock(dx + nx, dy + y, dz + nz, block); } } }}
function fillBlock(sx, sy, sz, dx, dy, dz, id) { let w = Math.abs(dx - sx) + 1; let h = Math.abs(dy - sy) + 1; let l = Math.abs(dz - sz) + 1;
let startX = Math.min(sx, dx); let startY = Math.min(sy, dy); let startZ = Math.min(sz, dz); for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { world.setBlock(startX + x, startY + y, startZ + z, id); } } }}
function moveBlock(sx, sy, sz, dx, dy, dz, w, h, l) { cloneBlock(sx, sy, sz, dx, dy, dz, w, h, l); fillBlock(sx, sy, sz, sx + w - 1, sy + h - 1, sz + l - 1, 0); }
function paintBlock(sx, sy, sz, dx, dy, dz, w, h, l, colorId) { cloneBlock(sx, sy, sz, dx, dy, dz, w, h, l);
for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { world.setBlock(dx + x, dy + y, dz + z, colorId); } } }}
function replaceBlock(sx, sy, sz, dx, dy, dz, id, newId) { let w = Math.abs(dx - sx) + 1; let h = Math.abs(dy - sy) + 1; let l = Math.abs(dz - sz) + 1;
let startX = Math.min(sx, dx); let startY = Math.min(sy, dy); let startZ = Math.min(sz, dz); for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { if (world.getBlock(startX + x, startY + y, startZ + z) === id) { world.setBlock(startX + x, startY + y, startZ + z, newId); } } } }}
function mirrorBlock(sx, sy, sz, dx, dy, dz, w, h, l, axis) { if (axis === "x") { for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { let block = world.getBlock(sx + x, sy + y, sz + z); world.setBlock(dx + w - x - 1, dy + y, dz + z, block); } } } } else if (axis === "y") { for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { let block = world.getBlock(sx + x, sy + y, sz + z); world.setBlock(dx + x, dy + h - y - 1, dz + z, block); } } } } else if (axis === "z") { for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { let block = world.getBlock(sx + x, sy + y, sz + z); world.setBlock(dx + x, dy + y, dz + l - z - 1, block); } } } } }
function clearBlock(sx, sy, sz, dx, dy, dz) { let w = Math.abs(dx - sx) + 1; let h = Math.abs(dy - sy) + 1; let l = Math.abs(dz - sz) + 1;
let startX = Math.min(sx, dx); let startY = Math.min(sy, dy); let startZ = Math.min(sz, dz); for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { world.setBlock(startX + x, startY + y, startZ + z, 0); } } }}
// bad circle function circleBlock(x, y, z, height, radius, thickness, startDeg, endDeg, id) { for (let deg = startDeg; deg <= endDeg; deg++) { let rad = deg * (Math.PI / 180); let sin = Math.sin(rad); let cos = Math.cos(rad); for (let h = 0; h < height; h++) { for (let r = radius - thickness; r <= radius; r++) { let dx = Math.round(r * cos); let dz = Math.round(r * sin); world.setBlock(x + dx, y + h, z + dz, id); } } } }
function detectSize(sx, sy, sz, dx, dy, dz) { let w = Math.abs(dx - sx) + 1; let h = Math.abs(dy - sy) + 1; let l = Math.abs(dz - sz) + 1;
let startX = Math.min(sx, dx); let startY = Math.min(sy, dy); let startZ = Math.min(sz, dz); return { width: w, height: h, length: l };}
function hollowCube(sx, sy, sz, dx, dy, dz, id) { let w = Math.abs(dx - sx) + 1; let h = Math.abs(dy - sy) + 1; let l = Math.abs(dz - sz) + 1;
let startX = Math.min(sx, dx); let startY = Math.min(sy, dy); let startZ = Math.min(sz, dz); for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { if (x === 0 || x === w - 1 || y === 0 || y === h - 1 || z === 0 || z === l - 1) { world.setBlock(startX + x, startY + y, startZ + z, id); } } } }}
function fillBlockWithRotation(sx, sy, sz, w, h, l, id, angle) { let rad = angle * (Math.PI / 180); let sin = Math.sin(rad); let cos = Math.cos(rad);
for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { // Calculate the rotated positions let nx = Math.round(x * cos - z * sin); let nz = Math.round(x * sin + z * cos); // Place the block at the new rotated position world.setBlock(sx + nx, sy + y, sz + nz, id); } } }}
function lineBlock(sx, sy, sz, ex, ey, ez, id) { // Calculate the differences in each direction let dx = ex - sx; let dy = ey - sy; let dz = ez - sz;
// Calculate the total steps needed based on the largest difference let steps = Math.max(Math.abs(dx), Math.abs(dy), Math.abs(dz)); // Calculate the increment for each axis let stepX = dx / steps; let stepY = dy / steps; let stepZ = dz / steps; // Place blocks along the line for (let i = 0; i <= steps; i++) { // Calculate the current position based on the step let x = Math.round(sx + stepX * i); let y = Math.round(sy + stepY * i); let z = Math.round(sz + stepZ * i); // Set the block at the calculated position world.setBlock(x, y, z, id); }}
function outlineBlock(sx, sy, sz, dx, dy, dz, id) { let w = Math.abs(dx - sx) + 1; let h = Math.abs(dy - sy) + 1; let l = Math.abs(dz - sz) + 1;
let startX = Math.min(sx, dx); let startY = Math.min(sy, dy); let startZ = Math.min(sz, dz); // Create the outline by setting blocks at the edges of the rectangle for (let x = 0; x < w; x++) { for (let y = 0; y < h; y++) { // Set corners and edges if (x === 0 || x === w - 1 || y === 0 || y === h - 1) { world.setBlock(startX + x, startY + y, startZ, id); // Bottom face world.setBlock(startX + x, startY + y, startZ + l - 1, id); // Top face } // Vertical edges world.setBlock(startX + x, startY, startZ + l - 1, id); // Bottom face world.setBlock(startX + x, startY + h - 1, startZ + l - 1, id); // Top face } } for (let y = 0; y < h; y++) { for (let z = 0; z < l; z++) { // Set corners in the vertical columns world.setBlock(startX, startY + y, startZ + z, id); // Front face world.setBlock(startX + w - 1, startY + y, startZ + z, id); // Back face } }}
function undoBlock(count) {
- Assistant
It seems that your provided code is for a 3D block manipulation script, potentially for a voxel-based game or simulator, possibly Minecraft-like. This code contains multiple functions for rendering various 3D shapes, performing transformations like moving, rotating, and mirroring blocks, as well as functions to manipulate block states (like replacing, painting, outlining, and clearing blocks).
Here's a high-level overview of the functionality, along with explanations for each function:
Drawing Functions
- hcyl: Draws a hollow cylinder with a specified base, height, and radius.
- cyl: Draws a filled cylinder with height and radius.
- cube: Intended to draw a filled cube, but seems incorrectly implemented as it checks
if (d < radsq), which does not capture cube edges properly. - sphereoid: Draws a filled ellipsoid (stretched sphere) based on provided width, height, and depth.
- asphereoid: Similar to
sphereoid, but includes some asynchronous behavior for gradual block placement, which includes a delay. - circleBlock: Draws a circular outline at a specific height and radius.
Block Manipulation Functions
- cloneBlock: Copies a rectangular block of space from one position to another.
- moveBlock: Moves a block of space and clears the original area.
- rotateBlock: Rotates a block around the Y-axis based on an angle.
- paintBlock: Clones a block and "paints" it by changing the block type to a specified color.
- replaceBlock: Replaces a specific type of block with another in a defined area.
- mirrorBlock: Mirrors a block's content along a specified axis (X, Y, Z).
- clearBlock: Clears all blocks in a defined cuboid space.
Additional Features
- undetBlock: The function is incomplete but seems to imply a functionality for undoing previous block operations, which would require maintaining some form of history (not shown in the provided code).
General Considerations
- Efficiency: For large areas or complex shapes, consider implementing optimizations to reduce the number of block changes performed in the world.
- Error Handling: Functions may need additional checks for out-of-bounds or invalid parameters.
- Code Duplication: There is some code repetition that could be reduced with utility functions.
Recommendations
- Test Each Function, particularly those involving rotations and dimensional manipulations. Ensure they behave as expected within the game world.
- Consider Extending Functionality: You can implement additional features like scaling blocks or handling multiple block IDs simultaneously.
- Document Your Code: Adding comments helps others (and your future self) to understand your code quickly.
If you have any specific requests or need further explanations about particular functions or concepts, feel free to ask!
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.