I am building a 3d renderer in C++ using Vulkan.hpp. I am in the process of implementing…
- User
I am building a 3d renderer in C++ using Vulkan.hpp. I am in the process of implementing a SSAO stage into the rendering pipeline. I have managed to set everything up and have a working SSAO stage. However, I just want someone to check the following code for the SSAO fragment shader and verify everything looks right.
Inputs to the InputsBufferObject:
kernelSize = 64 radius = 0.5 bias = 0.025 noiseScale = swapChainImage / 8
Noise and sample generation process:
for (unsigned int i = 0; i < ssaoSamples; ++i) { glm::vec3 sample( randomFloats(generator) * 2.0 - 1.0, randomFloats(generator) * 2.0 - 1.0, randomFloats(generator) * 2.0 - 1.0 ); // Use hemisphere sampling instead of full sphere if (sample.z < 0.0f) sample.z = -sample.z; sample = glm::normalize(sample); // Improved scale distribution for better sample spread float scale = pow((float)i / ssaoSamples, 2.0f); scale = 0.5f * (1.0f - cosf(scale * M_PI)); // Cosine distribution // Scale the sample and ensure proper normalization ssaoKernel.push_back(sample); } for (unsigned int i = 0; i < ssaoNoiseSize * ssaoNoiseSize; i++) { glm::vec4 noise( randomFloats(generator) * 2.0 - 1.0, randomFloats(generator) * 2.0 - 1.0, randomFloats(generator) * 2.0 - 1.0, 1.0f ); // Normalize and scale the noise noise = glm::normalize(noise)*0.1f; // Reduced noise scale ssaoNoise.push_back(noise); }SSAO fragment shader code:
#version 450
layout(location = 0) out vec4 FragColor;
layout(location = 0) in vec2 TexCoords;
layout(set = 0, binding = 0) uniform sampler2D gDepth; layout(set = 0, binding = 1) uniform sampler2D gNormal; layout(set = 0, binding = 2) uniform sampler2D texNoise;
layout(binding = 3) buffer SamplesBufferObject { vec3 samples[]; } samplesUBO;
layout(binding = 4) uniform InputsBufferObject { int kernelSize; float radius; float bias; vec2 noiseScale; } inputsUBO;
layout(binding = 5) uniform ProjBufferObject { mat4 proj; mat4 projInv; } projUBO;
vec3 reconstructVSPosFromDepth(vec2 uv) { float nearPlane = 0.1; float farPlane = 100.0; float depth = texture(gDepth, uv).r; float linearSampleDepth = (2.0 * nearPlane) / (farPlane + nearPlane - depth * (farPlane - nearPlane)); linearSampleDepth = normalize(linearSampleDepth); float x = uv.x * 2.0f - 1.0f; float y = (1.0f - uv.y) * 2.0f - 1.0f; vec4 pos = vec4(x, y, linearSampleDepth, 1.0f); vec4 posVS = projUBO.projInv * pos; vec3 posNDC = posVS.xyz / posVS.w; return posNDC; }
void main() { float nearPlane = 0.1; float farPlane = 100.0;
float depth = texture(gDepth, TexCoords).r; vec3 posVS = reconstructVSPosFromDepth(TexCoords); vec3 normal = normalize(texture(gNormal, TexCoords).rgb); vec3 randomVec = normalize(texture(texNoise, TexCoords * inputsUBO.noiseScale).xyz); vec3 tangent = normalize(randomVec - normal * dot(randomVec, normal)); vec3 bitangent = cross(tangent, normal); mat3 TBN = mat3(tangent, bitangent, normal); float occlusion = 0.0f; for (uint i = 0; i < inputsUBO.kernelSize; i++) { vec3 samplePos = TBN * samplesUBO.samples[i].xyz; samplePos = posVS + samplePos * inputsUBO.radius; vec4 offset = vec4(samplePos, 1.0f); offset = projUBO.proj * offset; offset.xyz /= offset.w; offset.xyz = offset.xyz * 0.5f + 0.5f; //offset.y = 1.0f - offset.y; vec3 reconstructedPos = reconstructVSPosFromDepth(offset.xy); // range check & accumulate float rangeCheck = smoothstep(0.0, 1.0, inputsUBO.radius / abs(posVS.z - reconstructedPos.z)); occlusion += (reconstructedPos.z >= samplePos.z + inputsUBO.bias ? 1.0 : 0.0) * rangeCheck; } occlusion = (occlusion / inputsUBO.kernelSize); FragColor = vec4(occlusion,occlusion,occlusion,1.0);}
- Assistant
Your SSAO fragment shader code looks quite solid, but I'll provide a few comments and suggestions that might help you ensure it's working as intended and improve its readability or performance.
Review Comments
-
Uniform Buffer Objects:
- You are using
InputsBufferObject,ProjBufferObject, andSamplesBufferObjectfor various uniform data. Ensure that the bindings correspond correctly with the expected engine layout, as mismatches can lead to crashes or incorrect rendering.
- You are using
-
Depth Reconstruction:
- The
reconstructVSPosFromDepthfunction does the job of reconstructing the position from depth, but make sure the near and far planes are consistent across your entire rendering setup (e.g., depth buffer settings, projection settings). Consider using the same near and far plane values from your projection matrix rather than hardcoding them.
- The
-
Normal Sampling:
- The normal is sampled directly using
texture(gNormal, TexCoords).rgb. Ensure that the normal map data you are using is in the right format and that the normals are properly transformed to world space if necessary.
- The normal is sampled directly using
-
World Position Calculation:
- The
vec3 reconstructedPosmay be sourced from the depth texture. Make sure you are calculating and sampling depth values robustly to avoid inaccuracies.
- The
-
Distribution and Weights:
- The random sampling and kernel generation seem to be handled well. You scale the samples, which is a good approach. Be mindful of the sampling distribution; sometimes additional functions could be used for better overall spread, depending on your visual results.
-
Range Check:
- The
smoothstep()check for the range should consider edge cases whereabs(posVS.z - reconstructedPos.z)could be too small or too large. Ensure appropriate handling of those edge cases to avoid unwanted flickering or artifacts.
- The
-
Occlusion Calculation:
- You compute
occlusionand normalize it by the kernel size at the end, which makes sense for producing a final scalar occlusion value. Consider also adding capabilities for clamping the value between [0,1] if there's any potential for values to go outside this range.
- You compute
-
Output Color:
- The resulting
FragColor = vec4(occlusion, occlusion, occlusion, 1.0);is a good way of visualizing SSAO. You might want to adjust how it’s displayed (e.g., using multiplier values) to enhance your SSAO effects based on scene lighting or materials, if desired.
- The resulting
Suggestions for Improvements
-
Verbose Variable Names: Consider using more descriptive names for your variables. While the current names are fairly self-explanatory, clearer names can help others (and yourself) understand the code better in the future.
-
Modularity: If you find commonalities in your shaders over multiple effects, creating separate modules for these common functionalities can reduce redundancy.
-
Error Handling: It’s a good idea to ensure for each shader resource (textures, buffers) that you verify its loading/sampling is successful. While this is more relevant to your C++ code, having helpful assertive messages can streamline debugging.
-
Debugging: While developing the shader, consider temporarily outputting intermediate values (like
posVS,samplePos, ornormalintoFragColor) to visualize these constructs while debugging.
Conclusion
Overall, your shader does appear to follow the typical structure and logic used in SSAO applications. The primary focus should be on the accuracy of the data that feeds into it (especially depth information and normals), and the handling of edge cases where approximations happen (like depth comparison). Lastly, ensure your testing covers various scenarios to catch any anomalies in different lighting or material contexts. Good luck with your development!
-