25.10 . (a) At room temperature what is the strength of the elec tric field in a…
- User
25.10 . (a) At room temperature what is the strength of the elec tric field in a 12-gauge copper wire (diameter 2.05 mm) that is needed to cause a 2.75-A current to flow? (b) What field would be needed if the wire were made of silver instead?
- Assistant
To determine the strength of the electric field required in the copper and silver wires, we use the relationship from Ohm's Law:
[ J = \sigma E ]
Where:
- ( J ) is the current density ( J = \frac{I}{A} ) (( A ) is the cross-sectional area of the wire),
- ( \sigma ) is the electrical conductivity of the material,
- ( E ) is the electric field.
So, the electric field can be expressed as:
[ E = \frac{J}{\sigma} = \frac{I}{\sigma A} ]
The cross-sectional area ( A ) of the wire is:
[ A = \pi r^2 = \pi \left( \frac{d}{2} \right)^2 ]
Where ( d = 2.05 , \text{mm} = 0.00205 , \text{m} ) is the diameter of the wire.
Step 1: Calculate the cross-sectional area, ( A )
[ A = \pi \left( \frac{0.00205}{2} \right)^2 = \pi \times (0.001025)^2 \approx 3.299 \times 10^{-6} , \text{m}^2 ]
Step 2: Write down material properties
At room temperature, the approximate electrical conductivities ( \sigma ) are:
- Copper: ( \sigma_{\mathrm{Cu}} = 5.96 \times 10^7 , \mathrm{S/m} ),
- Silver: ( \sigma_{\mathrm{Ag}} = 6.30 \times 10^7 , \mathrm{S/m} ).
Part (a): Electric field for the copper wire
The electric field is:
[ E_{\mathrm{Cu}} = \frac{I}{\sigma_{\mathrm{Cu}} A} ]
Substitute ( I = 2.75 , \mathrm{A} ), ( \sigma_{\mathrm{Cu}} = 5.96 \times 10^7 , \mathrm{S/m} ), and ( A = 3.299 \times 10^{-6} , \mathrm{m}^2 ):
[ E_{\mathrm{Cu}} = \frac{2.75}{(5.96 \times 10^7)(3.299 \times 10^{-6})} ]
First, calculate the denominator:
[ (5.96 \times 10^7)(3.299 \times 10^{-6}) \approx 196.64 ]
Now divide:
[ E_{\mathrm{Cu}} = \frac{2.75}{196.64} \approx 0.014 , \mathrm{V/m} ]
So, the electric field required in the copper wire is approximately:
[ \boxed{0.014 , \mathrm{V/m}} ]
Part (b): Electric field for the silver wire
Similarly, for the silver wire:
[ E_{\mathrm{Ag}} = \frac{I}{\sigma_{\mathrm{Ag}} A} ]
Substitute ( \sigma_{\mathrm{Ag}} = 6.30 \times 10^7 , \mathrm{S/m} ), ( A = 3.299 \times 10^{-6} , \mathrm{m}^2 ), and ( I = 2.75 , \mathrm{A} ):
[ E_{\mathrm{Ag}} = \frac{2.75}{(6.30 \times 10^7)(3.299 \times 10^{-6})} ]
First, calculate the denominator:
[ (6.30 \times 10^7)(3.299 \times 10^{-6}) \approx 207.87 ]
Now divide:
[ E_{\mathrm{Ag}} = \frac{2.75}{207.87} \approx 0.0132 , \mathrm{V/m} ]
So, the electric field required in the silver wire is approximately:
[ \boxed{0.0132 , \mathrm{V/m}} ]
Final Results:
- (a) Electric field for copper wire: ( \boxed{0.014 , \mathrm{V/m}} ),
- (b) Electric field for silver wire: ( \boxed{0.0132 , \mathrm{V/m}} ).