please make a bullet summary tactiq.io free youtube transcript Making Ceramic Handles…
- User
please make a bullet summary
tactiq.io free youtube transcript
Making Ceramic Handles With A Handheld Clay Extruder - No Pulling Needed
https://www.youtube.com/watch/PhyIhzTNmGI
00:00:00.089 In this video I'm going to show you aquick and easy way to make cool looking 00:00:04.740 handles like these. 00:00:21.070 Hi, Marie here from Pottery Craftersgiving you tips tools and techniques to 00:00:26.750 help you make beautiful pottery. When Istarted making mugs I was actually 00:00:32.930 afraid to make handles. My mugs had nohandles, did yours? 00:00:41.530 This is what I ended up with when Ipulled my handles. I didn't make them 00:00:47.660 quite thick enough.I like the extruder on the wall but I'm 00:00:52.399 not making 50 mugs at a time plus it wasa little hard for me to use. This is 00:00:59.090 exactly what I needed.Mine is the Super Duper clay extruder 00:01:03.050 from Scott Creek Pottery. Kemper andShimpo also carry their own versions of 00:01:09.440 the handheld extruder. It's a greathelper for beginners or anyone that's 00:01:14.570 not that good at making handles. This oneincluded a half-inch coil die and two 00:01:24.470 blank dies which I made two smallercoils with and bought a set of eight 00:01:31.420 handle molds. You can choose from manydifferent dies and make your own that's 00:01:38.660 great.This little baby holds over a pound and 00:01:43.099 a half of clay and can make up to adozen handles at a time. Let's make some 00:01:50.149 handles. 00:01:54.909 These are the patterns that the dyesmake. If you would like a handle for a 00:02:02.560 cup, it's a smaller handle. If you'd likea larger mug handle, this one's a nice 00:02:10.508 one. You can be creative and make alldifferent patterns. This is how easy it 00:02:24.370 is to make a cool handle. Take some nicesoft well wedged clay your extruder and 00:02:31.300 pick out a die. Now hold the top handlepress the release button and pull the 00:02:43.750 plunger back. 00:02:48.610 That's how easy it is. Untwist the cap,make sure your clay is a little smaller 00:02:59.689 then the tube and slide the clay rightinto the tube. I like to have a little 00:03:08.930 clay left over to stick my die on. Chooseyour die. 00:03:23.879 Twist the cap back on, make sure youdon't twist it too tight because it'll 00:03:29.409 be hard to actually open up again. Makesure your extruder is vertical because 00:03:41.799 that helps to stop the clay from curling.As you're bumping your handle all you 00:03:52.060 have to do is press the handle and herewe go, see it starting to curl right 00:03:57.099 there. All you have to do is straightenit out with your finger and continue to 00:04:03.400 press down. I think that's a good sizefor a handle. Just take your finger and 00:04:09.480 pull it off and there's a cool handle. 00:04:18.959 Make another. It starts to curl, straighten.Now another cool handle. 00:04:38.460 Now if you want to be creative and makeanother handle in a different way just 00:04:46.430 unscrew the top push the die off. 00:04:53.960 Select another die. 00:04:58.780 Place it right on top of the clay,twist the cap and you're ready to go again. 00:05:05.400 Press your handle, there's another coolhandle you can make. 00:05:23.229 That's how easy it is to make a coolhandle. These are some handles that I 00:05:29.169 just finished. This one has been bisquedalready. It's actually two different 00:05:35.740 patterns together. I love the greatpatterns you can make with these handles. 00:05:46.770 Makes it so creative so beautiful addsjust something extra to your cup or your 00:05:56.080 mug. On this one I actually used this dieand I used it for the top also. 00:06:21.420 Then I used this dye for the top of thisjar. You can be creative. Here's another one 00:06:36.840 I put together. Give it a little twist. 00:06:58.800 Here are just a few of my finishedhandles. 00:07:01.900 I love the decorative choices you getwith the handheld Extruder. Now your mugs 00:07:08.440 don't have to be hard to make or have nohandles at all. You can make handles like 00:07:14.140 a Pro, Plus save a lot of time. How do youmake your handles? What are your favorite 00:07:20.560 handles? Let me know in the commentsection below and click that subscribe 00:07:25.510 button. Also in the comment section aremore show notes and pottery making Info. 00:07:31.630 Click here to go to my other videoabout attaching handles to the mugs in 00:07:37.780 five easy steps and keep making thatbeautiful Pottery.
- Assistant
- Video Title: "Making Ceramic Handles With A Handheld Clay Extruder - No Pulling Needed"
- Presenter: Marie from Pottery Crafters
- Topic: Tips, tools, and techniques for creating pottery, specifically ceramic handles.
- Marie shares her initial struggle with making handles for mugs, leading to the exploration of easier methods.
- She discusses the benefits of using a handheld clay extruder, specifically the "Super Duper Clay Extruder" from Scott Creek Pottery.
- Other brands mentioned include Kemper and Shimpo, which also offer similar extruders.
- The extruder can hold over 1.5 pounds of clay and produce up to a dozen handles at once.
- Demonstrates how to use the extruder with different dies for various handle sizes and patterns.
- Process:
- Soft and well-wedged clay is used.
- Selected die is placed on the extruder, and clay is inserted.
- The extruder is kept vertical to prevent curling.
- Handles are pressed out and shaped with fingers.
- Different dies can be swapped for creative patterns.
- Shows examples of completed handles, highlighting the uniqueness and decorative potential of each.
- Encourages viewers to experiment with creating their handles using the extruder.
- Invites viewer interaction regarding their handle-making experiences and preferences.
- References other related videos for further learning on pottery.
- User
tactiq.io free youtube transcript
Making 5 Ceramic Handles with A Handheld Clay Extruder Easy No Mess Handles
https://www.youtube.com/watch/7v_JBQqddJM
00:00:00.589 In this video I'm going to show you howto make some cool looking at Functional 00:00:05.850 Handles with the help of my hand heldClay Extruder. 00:00:21.260 Hi, Marie here,Welcome to Pottery Crafters. When it 00:00:25.620 comes to making handles it's fun to seewhat kind of designs you can come up 00:00:29.340 with. Handles can make a unique statementwhile still being very functional, but 00:00:35.000 when your not so good at making them theprospect of making something more than a 00:00:40.410 plain handle can be a bit morechallenging, but not the way I'm going to 00:00:45.930 show you today. Here are five fun andeasy handle designs I came up with. Let's 00:00:53.250 dive right in.For this handle, I'm going to use the 00:00:58.530 large coil die. If you're not familiarwith how to use the handheld extruder I 00:01:03.960 left a video for you in the commentsection below. 00:01:16.600 Squeeze out a long coi.l 00:01:29.070 Fold it over and twist. 00:01:37.119 It's that easy. 00:01:47.680 if you see any cracking rub some wateron the cracks. 00:02:05.689 Make sure your clay is nice and softwhen you do this. There you are a cool 00:02:13.459 twisted handle. Cut to the length youwant your handle to be and let it dry to 00:02:23.540 leather hard. Don't cut off too much. Youcan always cut off a little more when 00:02:31.610 you're attaching it to your mug. 00:02:52.920 I left a video for you in thedescription below on attaching handles. 00:03:00.260 This is what the handle looks like whenit's finished. 00:03:15.130 It not only looks good, it feels good too.I like this handle, one of my favorites. 00:03:23.070 I'm going to use a small coil die tomake a different twisted handle. 00:03:36.570 Squeeze out a long coil 00:03:45.790 That should do it. Fold it over to have threecoils 00:04:12.550 then start to twist. 00:04:23.880 Keeping the coils separated until theytwist together. 00:04:41.629 So far I haven't had any of my handlescrack. Again if your coil starts to crack 00:04:57.110 just rub some water on the clay. 00:05:08.590 Cut the length you want your handle tobe and let it dry to leather hard. 00:05:27.039 This is what the finished handle lookslike. This handle is nice for smaller 00:05:34.479 mugs or cups. Underglazing each coilwith a different color really makes the 00:05:41.110 handle pop. 00:05:51.849 For this handle, I'm going to use twodifferent dies. This die with a groove in 00:05:57.369 the middle and this medium size coil die.This design makes your handle a bit 00:06:04.149 thicker. 00:06:14.349 Squeeze out the groove die. 00:06:22.020 And set it aside. Score in the middle groove 00:06:35.599 and the medium coil. 00:06:49.930 And attach them. it's as easy as that. 00:07:03.190 Cut the handle to the length that youwant. 00:07:16.229 And let it dry before attaching it toyour mug. Here's how the finished handle 00:07:26.370 looks. I like this design. I like how theglaze floats down on the handle and it 00:07:39.719 has a nice feel to it too. For the nexthandle I'm going to use this die with 00:07:53.069 the two grooves and the medium coil die.This handle is great for heavier pieces 00:07:59.099 like pitchers and larger mugs. 00:08:24.450 I already have the medium coils. 00:08:41.539 Score the middle of the grooves and themedium coils. 00:09:02.000 Put a little slip on. 00:09:18.829 And put them together. It's that easy 00:09:27.579 Little crack or imperfection, just put a 00:09:34.060 little water on it. 00:09:58.720 Cut the length you want and set it aside. 00:10:07.100 Now that's a cool-looking hand. This iswhat the finished handle looks like. A 00:10:13.420 cool design was such a nice feel. Reallysmooth, very sturdy. 00:10:26.230 I love this handle. 00:10:34.260 I'm using the medium coil die to showyou a cool handle design for lids. Fold 00:10:44.820 the coil in half and then cut the lengthyou want your handle to be. 00:11:06.020 Then score and slip the ends and attachthem together. 00:11:27.000 Make sure they're attached. 00:11:35.040 Here we go. 00:11:40.119 Once they're attached 00:11:48.140 take your coil and pinch it. Then 00:12:00.460 arch it. Let it dry to leather hard andattach it to your lid. This is what the 00:12:10.340 finished handle looks like. It has a nicefeel to it. It's large enough to grab on 00:12:16.610 to. I like the look of the handle it canspruce up any jar or pot yet be very 00:12:25.100 functional. With the little help from thehandheld excluder you can easily get 00:12:36.980 fancy and put a new twist on yourhandles while still being functional 00:12:41.540 like these. When you make your handlesare you a hand puller or Extruder 00:12:50.750 user. Let me know in the comment sectionbelow. 00:12:54.230 Some of the best tips and feedback comefrom you. Now that you've learned a thing 00:12:59.120 or two on how to make your own fancyhandheld extruder handles. I'll bet you 00:13:04.190 can come up with a few unique designs ofyour own. Check out my other videos from 00:13:09.350 Pottery Crafters and don't forget toSubscribe hit the Bell Icon and get 00:13:14.780 notified whenever a new video comes out.I'll see in the next video.
- Assistant
- Video Title: "Making 5 Ceramic Handles with A Handheld Clay Extruder - Easy No Mess Handles"
- Presenter: Marie from Pottery Crafters
- Goal: Show how to make five unique and functional ceramic handles using a handheld clay extruder.
- Introduction: Emphasizes the importance of handles in pottery and the creative potential they offer, even for beginners.
Handle Designs Demonstrated:
-
Twisted Handle with Large Coil Die:
- Squeeze out a long coil, fold, and twist to create a unique design.
- If cracks appear, rub water on the cracked areas.
- Cut to preferred length and let dry to leather hard.
-
Twisted Handle with Small Coil Die:
- Use a small coil die to create a handle with three coils, twisted together.
- Highlight the option of underglazing each coil in different colors for added visual appeal.
-
Thicker Handle Using Two Different Dies:
- Use a groove die and a medium coil die together.
- Score the middle groove and attach to create a thicker handle.
-
Heavy-Duty Handle for Larger Pieces:
- Combine a groove die with a medium coil die.
- Mention the importance of sturdiness, especially for larger mugs or pitchers.
-
Lid Handle:
- Use medium coil die to create a handle for lids.
- Score and slip ends for attachment, then pinch and arch the coil to achieve the right shape.
- Final Thoughts: Emphasizes the functional and aesthetic possibilities with handheld extruders for creating unique handles.
- Viewer Interaction: Encourages viewers to share their preferred method of handle making in the comments (hand-pulling vs. extruding).
- Call to Action: Invites viewers to explore more videos on pottery crafts and to subscribe for updates on new content.