IBM x3650 M3 so i got this server and if i boot from a flash drive and look in the file…
- User
IBM x3650 M3 so i got this server and if i boot from a flash drive and look in the file manager there is no disks but raid conf sees them
- Assistant
It sounds like you're trying to boot from a flash drive on your IBM x3650 M3 server, but you're unable to see the disks in the file manager, even though RAID configuration recognizes them. Here are some steps and considerations that might help troubleshoot this issue:
-
Boot Mode: Ensure that you are booting in the correct mode (UEFI or Legacy) that matches how your storage controller is configured. If your disks are configured in a certain way (like RAID), make sure your boot mode does not conflict with that.
-
RAID Configuration: Since the RAID configuration sees the disks, confirm that the RAID volume is properly created. You can enter the RAID controller configuration utility during boot (usually by pressing a specific key, such as Ctrl + R, depending on the controller) to verify that the RAID array is set up and functioning correctly.
-
Filesystem Support: Depending on how the RAID array is set up and the operating system on your flash drive, it may not have the appropriate drivers to recognize the RAID array. For many Linux distributions, you might need to ensure the correct drivers for the RAID controller are included in the boot image.
-
Operating System Compatibility: If you are using a flash drive with an operating system that isn't compatible with the RAID setup (for example, if there are specific drivers required for the RAID controller), this could be the reason you're not seeing the disks. Make sure the OS on the flash drive supports the hardware.
-
Driver Installation: If you are using an operating system that allows for additional driver installations (like a Linux distro), try to load the appropriate RAID driver/module manually or include it in the installation.
-
Use Different USB Port: If you're using a USB 3.0 port for the flash drive, try switching to a USB 2.0 port. Some operating systems may have issues with USB 3.0 drivers.
-
Check Disk Management: After booting from the flash drive, open a terminal or command prompt and check if the disks are recognized at a lower level. You can use commands like
lsblk,fdisk -l, orparted -lin Linux to see if the disks appear there. -
BIOS/UEFI Settings: Check your BIOS/UEFI settings to ensure the controller mode (like AHCI or RAID) is correctly configured, as well as any settings related to storage and USB.
-
Firmware Updates: Make sure that the firmware of your RAID controller and the server's BIOS is up to date. Sometimes updates can fix compatibility issues.
-
Different Environment: If possible, try a different bootable environment (a different flash drive with another OS or live environment) to see if it recognizes the disks.
If after checking these items you still can't see the disks, it may be helpful to provide more details about your setup, such as the operating system on the flash drive and how the RAID is configured. If needed, consult the server's documentation or support resources for specific troubleshooting related to the RAID controller.
-